![]() |
|
![]() |
#1 |
Registered User
Join Date: Jul 2004
Location: conneaut ohio
Posts: 10
|
how to remove 4 speed
i want to replace the clutch, 68 gmc 4x4 i have removed rear drive shaft ,disconnected shift linkage,speed cable, e-brake cable,front drive shaft,hump cover and seat from cab. exhaust pipes are clear. Q should i remove trans and transfer case in one piece or take transfer case off first? i tried to remove transfer case by removing 5 or 6 bolts from it but it seems like something else is holding it together. man i need to get a service manual.
|
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Feb 2003
Location: WIS
Posts: 1,752
|
clutch
Whenever I need to replace a clutch on one of my wifes 4x4's, I pull the engine. It easier for me. Maybe if you have a transmission jack, pulling the other stuff would be easier.........Zoomy
|
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Mar 2003
Location: Colfax-California
Posts: 8,553
|
trans and tcase together weigh about 300lbs plus a few.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2003
Location: The Rubber City
Posts: 5,498
|
you gotta know about the hidden bolts on the Rockwell T221 adapter to get it off
![]() remove the little service plate on the driver side(held on with 2 bolts), and inside there are either 2 or 3 more bolts holding the adapter onto the transfer case. after you get those, it should come right off. I had the same problem when I was removing mine.
__________________
1969 GMC K2500 ![]() 1996 Honda Accord 2007 Kawasaki KLR 650 |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jul 2004
Location: conneaut ohio
Posts: 10
|
found the 2 bolts under the service plate. thanks, i sure didn't want to take it off in 1 piece it's a heavy mother !
|
![]() |
![]() |
![]() |
Bookmarks |
|
|