Transmission fluid leak - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tomatocity · 07-09-2005, 01:52 AM

Transmission fluid is leaking from the speedometer gear. I don't have the manuals to look it up so does the speedo gear have a O-ring or gasket that could be leaking? Thanks in advance.

Ps-Iwill be getting a Service Manual soon.

woodridge · 07-09-2005, 07:33 AM

There is an o-ring around the "bullet" that the gear goes in and a metal clad or rubber seal, depending on the type of bullet, inside.

**pjmoreland** · 07-09-2005, 08:30 PM

The speedometer gear can also get a groove worn in it from rubbing on the internal seal, so just replacing the seal may not fix the leak.

Fred T · 07-09-2005, 10:56 PM

If there is fluid in the speedo cable, it's the inner seal. If the cable is dry, it's the outer o-ring. To remove the bullet, jack the rear of the truck up so the fluid flows to the front, and less comes out when you remove the bullet.

tomatocity · 07-10-2005, 02:18 AM

Quote:

Originally Posted by Fred T

If there is fluid in the speedo cable, it's the inner seal. If the cable is dry, it's the outer o-ring. To remove the bullet, jack the rear of the truck up so the fluid flows to the front, and less comes out when you remove the bullet.

Thanks Fred. I will check it tomorrow.

Oh yes there is, my truck is ugly but it only has one way to go.

07-09-2005, 01:52 AM	#1
tomatocity Registered User Join Date: Jun 2005 Location: Sacramento CA Posts: 1,255	Transmission fluid leak Transmission fluid is leaking from the speedometer gear. I don't have the manuals to look it up so does the speedo gear have a O-ring or gasket that could be leaking? Thanks in advance. Ps-Iwill be getting a Service Manual soon. __________________ Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck.

07-09-2005, 07:33 AM	#2
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	There is an o-ring around the "bullet" that the gear goes in and a metal clad or rubber seal, depending on the type of bullet, inside. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

07-09-2005, 10:56 PM	#4
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	If there is fluid in the speedo cable, it's the inner seal. If the cable is dry, it's the outer o-ring. To remove the bullet, jack the rear of the truck up so the fluid flows to the front, and less comes out when you remove the bullet. __________________ Fred There is no such thing as too much cam...just not enough engine.

07-09-2005, 08:30 PM	#3
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,770	The speedometer gear can also get a groove worn in it from rubbing on the internal seal, so just replacing the seal may not fix the leak.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.