F/S Billet dash bezel & glovebox door covers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

byrd · 02-09-2007, 11:10 PM

I have a used set of Billet aluminum dash bezel & glovebox door cover, that were in a parts truck I bought that caught fire. Both are in very good condition needing only a minor cleaning and would be nice enough for a show truck. I haven't really tried to clean them, just wiped them down with a soft rag and soapy water. The black rubs marks on the dash bezel cover should come off with a green scrubby pad and if not will be covered by your upper column seal in your truck anyway. I am also including a brand new black and chrome dash bezel that has some issues with the black paint on it(will not be seen will be under the billet cover) the chrome on the bezel is perfect and the bezel looks perfect in the pics. The glovebox cover is still installed on the glovebox door and if you want the door too add $5 for the weight of shipping the door. I have the mounting screws for the dash bezel cover shown in the first pic. LMC sells the dash bezel cover for $110, the glovebox door cover for $60 plus shipping. I will let the whole set of three pieces go for $175 shipped FIRM anywhere in the lower 48. I have also included a pic to give you an idea of what the covers look like installed in the truck. Sorry for the terrible pic, they are very dirty.The pic was taken the day I got the truck not too long after the fire.
REPLY HERE ONLY NO PM's, to keep it all out in the open.
I prefer paypal but will accept a US postal mo.

Here are the pics...

2nd_wnd · 02-09-2007, 11:55 PM

Looks good, I'm interested but will have to get back to you for sure

byrd · 02-10-2007, 03:30 PM

ttt

Chevy_Man · 02-10-2007, 03:45 PM

What else are you going to part out?

byrd · 02-10-2007, 05:13 PM

the truck in the pic is long gone.

Wootdog · 02-12-2007, 12:22 PM

So to use a regular glove box door you would have to drill out the holes on it correct? Does the mounting hardware/screws come with the the covers? If so do you take pay pal? Thanks, Kerry

byrd · 02-12-2007, 01:51 PM

It looks like to would have to mark and drill a tiny pilot hole as the screws are sheetmetel style. Yes it will come with the hardware if you do not want the door too. Yes I do take paypal, I will PM you my info.

Randy

byrd · 02-13-2007, 07:59 AM

SOLD to Wootdog. Thanks!!

02-09-2007, 11:55 PM	#2
2nd_wnd Registered User Join Date: Feb 2007 Location: Winston Salem, NC Posts: 310	Re: F/S Billet dash bezel & glovebox door covers Looks good, I'm interested but will have to get back to you for sure

02-10-2007, 03:45 PM	#4
Chevy_Man Tightwad Join Date: Jun 2005 Location: Louisiana Posts: 408	Re: F/S Billet dash bezel & glovebox door covers What else are you going to part out? __________________ 56 Chevy custom cab step side under construction 55 Chevy 210 68 SWB Stepside back burner under construction 72 Chevy LWB 84 CJ 7 05 Chevy 1500 Crew Cab 30X40 DOGHOUSE(shop) with many add ons

02-12-2007, 12:22 PM	#6
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,676	Re: F/S Billet dash bezel & glovebox door covers So to use a regular glove box door you would have to drill out the holes on it correct? Does the mounting hardware/screws come with the the covers? If so do you take pay pal? Thanks, Kerry __________________ 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.