71 c-10 lwb 350/3tree coilspring F? trade - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brennecke · 01-13-2004, 04:15 PM

My wife is sick and I have a new baby. I hate it, but I have to admit to myself that I have no hope of getting this truck project going. So here is what I have up for grabs.

71 c-10 Lwb 350/3 speed coilspring. Recently replaced carrier bearing, standard rocker rust, but good cab corners. Rust in inner bedsides and outer bedsides near wheel wells. Not the freshest engine ever, but runs and has HEI.

I have a 3.73 eaton posi in a 69 axle with drums which may or may not be usable. I have Two extra doors and a fender to replace the dented or scratched ones on the truck. I also have a repair manual and a basket of carb parts.

73 eldorado torn up for 500 engine swap. You can pull the engine and leave the body or take anything you want from it (telescoping steering column).

425 caddy motor sitting in weather, probably scrap, but could be a good swap candidate too.

I will consider trades for an economy car or something that would fit in the garage better. My wife would like me to work on a little euro car for her (Ghia, TR7, austin-healy etc).

Take everything for $1100 or make offers.

located in Northest Missouri

Power trip has first dibs on the caddy if he wants it.

brennecke · 01-13-2004, 04:16 PM

you can email me at (remove the spaces)
matt @ exploring america . com

bad 71 chevy · 01-13-2004, 09:11 PM

how much for just 3.73 eaton posi and which fender is it if it is the drivers side how much for it thanks

Jim Molloy · 01-13-2004, 09:20 PM

If Power Trip doesn't want the Eldo ,would you consider parting
some of it ?

Would really like the oil pan ,oil pickup tube and drivers side
exhaust manifold.

No big deal if you don't want to do this . Wish I was closer.

brennecke · 01-14-2004, 04:34 PM

$50 for the axle no promises that it works well. I think it is a pass side fender. I'll look tonight.

I'd rather sell the whole motor. $150

brennecke · 01-14-2004, 04:35 PM

Sorry, I didn't see you are in oregon. If nothing happens on the motor, I'd pull those parts and ship them. Are you in a hurry?

Jim Molloy · 01-14-2004, 05:49 PM

No hurry. Let me know what happens. I've got a 500 Caddy
in my garage and need those parts for install in my pickup.

I'm sure we could decide on a fair price. If I was closer I'd be
there with my truck ,hoist and $150 cash in hand.

brennecke · 01-15-2004, 05:34 PM

Please make offeres if you are interested in any of it.

Jim Molloy · 01-15-2004, 06:24 PM

Email sent..

**BOSS** · 01-15-2004, 09:47 PM

more info on the 500 please?

brennecke · 01-16-2004, 12:32 PM

The 500 is in a 73 eldo. I have not so gently ripped up the eldo in order to get at the engine. The engine ran great when I got the car, but hasn't been started in nearly a year. What else would you like to know about it?

brennecke · 01-20-2004, 01:13 PM

bump

**Joesjunk** · 01-20-2004, 03:46 PM

Do you have any pics of the truck??

**BOSS** · 01-20-2004, 09:40 PM

Do you have all of the brackets?Does it have a tranny?Where are you at in MO?Any pics?Thanx

brennecke · 01-21-2004, 01:00 PM

I'll try to get some pics together. The pic in my avatar is the truck.
The engine is in an Eldorado. They are front wheel drive, so the tranny is no good for you. You'd have to get an adapter plate from MTS. All of the accessories and belts are still attached.

I live in Northeast Missouri near Kirksville.

01-13-2004, 04:15 PM	#1
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	71 c-10 lwb 350/3tree coilspring F/S trade My wife is sick and I have a new baby. I hate it, but I have to admit to myself that I have no hope of getting this truck project going. So here is what I have up for grabs. 71 c-10 Lwb 350/3 speed coilspring. Recently replaced carrier bearing, standard rocker rust, but good cab corners. Rust in inner bedsides and outer bedsides near wheel wells. Not the freshest engine ever, but runs and has HEI. I have a 3.73 eaton posi in a 69 axle with drums which may or may not be usable. I have Two extra doors and a fender to replace the dented or scratched ones on the truck. I also have a repair manual and a basket of carb parts. 73 eldorado torn up for 500 engine swap. You can pull the engine and leave the body or take anything you want from it (telescoping steering column). 425 caddy motor sitting in weather, probably scrap, but could be a good swap candidate too. I will consider trades for an economy car or something that would fit in the garage better. My wife would like me to work on a little euro car for her (Ghia, TR7, austin-healy etc). Take everything for $1100 or make offers. located in Northest Missouri Power trip has first dibs on the caddy if he wants it. __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500 Last edited by brennecke; 01-13-2004 at 04:42 PM.

01-13-2004, 04:16 PM	#2
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	you can email me at (remove the spaces) matt @ exploring america . com __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

01-13-2004, 09:11 PM	#3
bad 71 chevy Registered User Join Date: Jun 2000 Location: Omaha NE 68122 Posts: 637	how much for just 3.73 eaton posi and which fender is it if it is the drivers side how much for it thanks __________________ 71 Chevy C/10 lwb 350 5 speed nv3500 3.73 rear end 2.5" Front Drop and 4" in the back Edelbrock perfomer rpm manifold Edelbrock 600 cfm carb Headmen headers

01-14-2004, 04:34 PM	#5
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	$50 for the axle no promises that it works well. I think it is a pass side fender. I'll look tonight. I'd rather sell the whole motor. $150 __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

01-14-2004, 04:35 PM	#6
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	Sorry, I didn't see you are in oregon. If nothing happens on the motor, I'd pull those parts and ship them. Are you in a hurry? __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

01-13-2004, 09:20 PM	#4
Jim Molloy Registered User Join Date: Dec 1999 Location: Albany,OR Posts: 49	If Power Trip doesn't want the Eldo ,would you consider parting some of it ? Would really like the oil pan ,oil pickup tube and drivers side exhaust manifold. No big deal if you don't want to do this . Wish I was closer.

01-14-2004, 05:49 PM	#7
Jim Molloy Registered User Join Date: Dec 1999 Location: Albany,OR Posts: 49	No hurry. Let me know what happens. I've got a 500 Caddy in my garage and need those parts for install in my pickup. I'm sure we could decide on a fair price. If I was closer I'd be there with my truck ,hoist and $150 cash in hand.

01-15-2004, 05:34 PM	#8
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	Please make offeres if you are interested in any of it. __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

01-15-2004, 06:24 PM	#9
Jim Molloy Registered User Join Date: Dec 1999 Location: Albany,OR Posts: 49	Email sent..

01-15-2004, 09:47 PM	#10
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,893	more info on the 500 please? __________________ Support our site Norwood Survivor

01-16-2004, 12:32 PM	#11
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	The 500 is in a 73 eldo. I have not so gently ripped up the eldo in order to get at the engine. The engine ran great when I got the car, but hasn't been started in nearly a year. What else would you like to know about it? __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

01-20-2004, 01:13 PM	#12
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	bump __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

01-20-2004, 03:46 PM	#13
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,702	Do you have any pics of the truck?? __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

01-20-2004, 09:40 PM	#14
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,893	Do you have all of the brackets?Does it have a tranny?Where are you at in MO?Any pics?Thanx __________________ Support our site Norwood Survivor

01-21-2004, 01:00 PM	#15
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	I'll try to get some pics together. The pic in my avatar is the truck. The engine is in an Eldorado. They are front wheel drive, so the tranny is no good for you. You'd have to get an adapter plate from MTS. All of the accessories and belts are still attached. I live in Northeast Missouri near Kirksville. __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.