Trim???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevelle · 06-23-2008, 04:27 PM

Has anyone ever installed side trim without drilling holes? i just Aquired some good trim for my 67 and was wondering if i could glue them on and if so what kind of glue would be best? thanks in advance

c10addict · 06-23-2008, 04:38 PM

I have seen 3M double sided tape do some amazing stuff...

I attached the headliner and trim in my 68 with it and it has not fallen at all... the only issue I see it the stock trim doesnt have a flat surface behind it to attach the tape to.... May have to lay epoxy or something in there to attach the tape too...

P.s. I drilled the holes in my truck for the trim and honestly it was not a bad job to do... Measure twice drill once!

chevelle · 06-23-2008, 04:57 PM

I noticed that it doesnt have a flat surface and figured that would be the kicker. the trim i bought doesnt have the clips on the back but im sure i can buy those somewhere and just suck it up and start drillin! I'll probably try to glue it first then if that doesnt work ill drill it, thanks for the advice.

c10addict · 06-23-2008, 05:13 PM

I covered the sides of my truck where the trim goes with that blue painters tape... I then lined it up and traced it... from there I figured clip position and started drilling.... have fun!!

1970 chev truck · 06-23-2008, 07:54 PM

you can get stick on clips for the upper trim, im not sure about bottom

chevychase · 06-23-2008, 08:17 PM

Was drilling them how they came factory? I have a trim set that was screwed in, which I thought was rigged.

**Hart_Rod** · 06-23-2008, 09:38 PM

Quote:

Originally Posted by 1970 chev truck

you can get stick on clips for the upper trim, im not sure about bottom

I think Mar-K sells it. At least they do for the lower trim on the 69-72.

hughnews1 · 06-23-2008, 09:41 PM

my body shop used liq nails on my driver door perfect

chevelle · 06-24-2008, 11:56 AM

Is yours the 67-68 trim hughnews1?

**WorkinLonghorn** · 06-24-2008, 03:30 PM

Here's a picture of the aftermarket plastic clip, next to the original. I was told that I could use the 3-M double sided tape on this plastic one but I haven't done it yet-didn't like the way the clip was sorta concave.

06-23-2008, 04:27 PM	#1
chevelle instagram "footbraker67" Join Date: Apr 2007 Location: Mustang,Oklahoma Posts: 204	Trim???? Has anyone ever installed side trim without drilling holes? i just Aquired some good trim for my 67 and was wondering if i could glue them on and if so what kind of glue would be best? thanks in advance __________________ 1967 lwb, bigwindow, factory air (converted to Vintage Air), custom option,4.5- 6 drop, TBI injected 355, 700r4, 5 lug, daily driver. 1967 Chevelle Malibu Drag car, 355, brodix heads and intake, powerglide, 10.82 @ 123 mph 1966 chevelle malibu, Street/strip, 355, spare parts from my other chevelle, 12.82 @104 mph 1968 lwb parts truck

06-23-2008, 04:38 PM	#2
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Trim???? I have seen 3M double sided tape do some amazing stuff... I attached the headliner and trim in my 68 with it and it has not fallen at all... the only issue I see it the stock trim doesnt have a flat surface behind it to attach the tape to.... May have to lay epoxy or something in there to attach the tape too... P.s. I drilled the holes in my truck for the trim and honestly it was not a bad job to do... Measure twice drill once! __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile Last edited by c10addict; 06-23-2008 at 04:39 PM.

06-23-2008, 04:57 PM	#3
chevelle instagram "footbraker67" Join Date: Apr 2007 Location: Mustang,Oklahoma Posts: 204	Re: Trim???? I noticed that it doesnt have a flat surface and figured that would be the kicker. the trim i bought doesnt have the clips on the back but im sure i can buy those somewhere and just suck it up and start drillin! I'll probably try to glue it first then if that doesnt work ill drill it, thanks for the advice. __________________ 1967 lwb, bigwindow, factory air (converted to Vintage Air), custom option,4.5- 6 drop, TBI injected 355, 700r4, 5 lug, daily driver. 1967 Chevelle Malibu Drag car, 355, brodix heads and intake, powerglide, 10.82 @ 123 mph 1966 chevelle malibu, Street/strip, 355, spare parts from my other chevelle, 12.82 @104 mph 1968 lwb parts truck

06-23-2008, 05:13 PM	#4
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Trim???? I covered the sides of my truck where the trim goes with that blue painters tape... I then lined it up and traced it... from there I figured clip position and started drilling.... have fun!! __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

06-23-2008, 07:54 PM	#5
1970 chev truck Weldin' it up Join Date: Mar 2007 Location: Ironwood, Michigan Posts: 803	Re: Trim???? you can get stick on clips for the upper trim, im not sure about bottom __________________ -Paul- RIP El Jay Dirt is for Racing, Asphalt is for Getting There If need be, send me an e-mail at cbm_racing_90@hotmail.com 1970 Custom/10 LWB 4X4 350/TH350 2003 Silverado 1500 Ext. cab 1974 Kawasaki 175 F7 Enduro 2002 Polaris Edge X 700

06-23-2008, 08:17 PM	#6
chevychase Registered User Join Date: Jun 2007 Location: Boca Raton, FL Posts: 476	Re: Trim???? Was drilling them how they came factory? I have a trim set that was screwed in, which I thought was rigged. __________________ Joe

06-23-2008, 09:41 PM	#8
hughnews1 Registered User Join Date: Apr 2002 Location: Hudson FL gulf coast Posts: 624	Re: Trim???? my body shop used liq nails on my driver door perfect

06-24-2008, 11:56 AM	#9
chevelle instagram "footbraker67" Join Date: Apr 2007 Location: Mustang,Oklahoma Posts: 204	Re: Trim???? Is yours the 67-68 trim hughnews1? __________________ 1967 lwb, bigwindow, factory air (converted to Vintage Air), custom option,4.5- 6 drop, TBI injected 355, 700r4, 5 lug, daily driver. 1967 Chevelle Malibu Drag car, 355, brodix heads and intake, powerglide, 10.82 @ 123 mph 1966 chevelle malibu, Street/strip, 355, spare parts from my other chevelle, 12.82 @104 mph 1968 lwb parts truck

06-24-2008, 03:30 PM	#10
WorkinLonghorn Senior Member Join Date: Dec 2006 Location: Studio City, Calif. Posts: 2,883	Re: Trim???? Here's a picture of the aftermarket plastic clip, next to the original. I was told that I could use the 3-M double sided tape on this plastic one but I haven't done it yet-didn't like the way the clip was sorta concave. Attached Images __________________ '69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.