67-72 Front Bumper Panel / roll pan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150shutterbug · 05-04-2010, 11:53 PM

I am looking to delete the front bumper on my project 70 truck. I have seen several trucks that have a metal panel in place of the front bumper. Does anyone know of an aftermarket manf that makes such a panel?

here is a link to one of the trucks I have seen:
http://www.streettrucksmag.com/image...-TRUCKS-05.jpg

Thanks,
JD

NevadaDVX · 05-05-2010, 12:04 AM

http://www.brotherstrucks.com/prodin...number=SLFRP01

lofly'a · 05-05-2010, 01:26 AM

here are more sources..............................

http://www.mar-k.com/catalog/catalog.aspx

http://www.gmcpaulstruckparts.com/roll_pans1.htm

http://www.lmctruck.com/icatalog/cb/full.aspx?Page=87

Longhorn Man · 05-05-2010, 07:17 PM

make sure you want it enough, you'll be cutting the front 8 or so inches of the frame off. May want to see if your local area would enforce bumper laws. That would suck to 'undo' this mod.

cdowns · 05-05-2010, 07:51 PM

if you do the mod and cut the frame horns take the cutoffs and tack weld them in the frame channel so if you ever need them you'll have them

good advise to check the enforsement of the law too

05-04-2010, 11:53 PM	#1
5150shutterbug Registered User Join Date: Jan 2010 Location: dallas tx Posts: 7	67-72 Front Bumper Panel / roll pan I am looking to delete the front bumper on my project 70 truck. I have seen several trucks that have a metal panel in place of the front bumper. Does anyone know of an aftermarket manf that makes such a panel? here is a link to one of the trucks I have seen: http://www.streettrucksmag.com/image...-TRUCKS-05.jpg Thanks, JD

05-05-2010, 12:04 AM	#2
NevadaDVX Registered User Join Date: Mar 2009 Location: Fallon, Nv Posts: 138	Re: 67-72 Front Bumper Panel / roll pan http://www.brotherstrucks.com/prodin...number=SLFRP01

05-05-2010, 01:26 AM	#3
lofly'a Registered User Join Date: May 2000 Location: Alexandria, LA 71301 Posts: 1,451	Re: 67-72 Front Bumper Panel / roll pan here are more sources.............................. http://www.mar-k.com/catalog/catalog.aspx http://www.gmcpaulstruckparts.com/roll_pans1.htm http://www.lmctruck.com/icatalog/cb/full.aspx?Page=87 __________________ -02 avalanche (daily driver) -66 gto ragtop 389/400 (garage queen, hand-me-down from dad) -72 Tribute Trans Am (6.0LS/T56 6-speed) in progress -2003 YUKON (Wife's) -71 gmc swb fleet (current project, gonna shave everything, bags, stuff w/ 20's, gen III powertrain) -48 3100 SWB - 12/31/23 LONG TERM Project

05-05-2010, 07:17 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: 67-72 Front Bumper Panel / roll pan make sure you want it enough, you'll be cutting the front 8 or so inches of the frame off. May want to see if your local area would enforce bumper laws. That would suck to 'undo' this mod.

05-05-2010, 07:51 PM	#5
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: 67-72 Front Bumper Panel / roll pan if you do the mod and cut the frame horns take the cutoffs and tack weld them in the frame channel so if you ever need them you'll have them good advise to check the enforsement of the law too __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.