Will be parting out '69 Chev K10, discount parts to SD-MN as I bring it back! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*botboy* · 02-05-2004, 02:41 AM

Looks like I'm going to be the proud new owner of a 1969 K10 longbed fleetside, less engine and transmission (was supposedly a 350/TH350). Getting it from SD so anyone who needs parts between there and here I can probably stop by and drop them off to avoid shipping costs, if you're really out of my way mebbe a few bucks for gas. If you aren't between there and here, hey, I'll ship to you, no problem you just pay for UPS. I'm putting this thread up as a "dibs" thread where people can claim parts before I get started ripping things apart.

Bad/missing:
No engine
No transmission (was an automatic)
Part of grill looks mashed, might be recoverable?? will know when I get closer look
Front drivers fender is borked
No tailgate
No taillights

Keeping to myself the cab and bedsides

Parts that look good, relatively rustfree:
Bed (keeping bedsides to myself, but floor and front section look good) wooden floor. WTB steel floored bed if anyone has one!
Doors look good, both of them
Descent seat, probably needs recovered (I think bench cant remember)
Automatic column
Auto crossmember
Don't know about dash, haven't got a pic of it yet
Glove compartment door
front axle/suspension (unknown as of yet)
rear axle (also unknown, if its posi you can buy the open 5-bolt carrier out of my '72 C10

)
driveshaft
Frame (only when I'm done ripping everything off it)
T-case

I will have the truck more likely than not, this weekend and then I can take pics of everything. If you want to put in a pic request or make an offer on something or group of somethings, my email is botboy60@hotmail.com.

ltitsnw · 02-05-2004, 04:48 AM

Hi...No hurry, but I might be interested in the rolling chassis with cross memebers, possibly the transfer also.......Thanks Troy

da-burb · 02-05-2004, 11:26 AM

I'd be interested in some of the box parts you don't need and the doors if they are nice.

VTKidder · 02-05-2004, 12:37 PM

Quote:

Originally posted by botboy
Front drivers fender is borked

borked

never heard that one before!

71swb4x4 · 02-05-2004, 01:03 PM

Is that the truck in Gregory?

When are you going?

I may be heading that way to pick up a truck also.

Shawn

jeffbo · 02-05-2004, 03:44 PM

I may have a steel bed floor for you. I bought a parts truck about 6 months ago that has one, although I'm not real sure of the condition, as it is sitting at my parents house in Huron and I haven't had the chance to tear into it yet. I may be going home this weekend, and I could inspect it and let you know what kind of shape it is in.

**67 cst swb** · 02-06-2004, 11:18 AM

Botboy,
where in S.D. are you headed and when? If your out west here, I could meet you and look at some of the stuff I could use that is mot already accounted for; doors,grille stuff,xfer case (if not sold)
just kinda whatevers there, i'm going to look at one this weekend east of rapid City maybe they are close together, who knows. E-mail me. ynelson@rushmore.com
Bryan in South Dakota

72MARIO · 02-06-2004, 02:26 PM

Would it happen to have the sport style bumper on the rear ? I would be interested in the brackets if they are avaible.

Mario

*botboy* · 02-07-2004, 06:55 PM

Pics of the truck: (72mario Looks to me like that rear bumper is no good)

http://cgi.ebay.com/ebaymotors/ws/eB...EBWA%3AIT&rd=1

67 cst swb, 71swb4x4 - Gregory SD. Currently trying to arrange when I'm going to pick it up, I'll let you know when I am headed out there via email.

Jeffbo - my email is botboy60@hotmail (dot) com, would appreciate pics if you could get them. LMK how much you want it and I will see if I can afford it at the moment (just bought a new tach and electric fan for my truck, timeserts for my caddie engine and this truck to boot lol. Otherwise I may be able to make a down payment with the rest coming when I finish parting out this '69)

sakohntr · 02-09-2004, 03:08 PM

How is the passenger fender???

71swb4x4 · 02-09-2004, 03:26 PM

Botboy

That guy has 2 more 67-72 trucks. If it looks like parting the first may be easy maybe you can rob a few parts off the other 2 while you are out there. When I was emailing him he said that he would take an offer for all of the trucks.
I was going to buy the other 2 but the wife is having none of that so I thought I would pass the info to you.
One is a 67 cab and front clip and the other is a 71 (I think, it may be a 69 or 70). The 71 is more complete.

Shawn

*botboy* · 02-13-2004, 09:25 PM

Picking the truck up this monday (presidents day). Anyone who is interested in parts, LMk in this thread or email me.

**67 cst swb** · 02-14-2004, 04:46 PM

BOTBOY: left you a PM

71swb4X4: what do you know about the 67 (or even if 68) cab and clip, I'm looking for a rebuildable 67/68 cab (A/C or non-A/C)Is is 2wd or 4x4? is it A/T or M/T? was it for sale or just parts? How could I get ahold of the guy? Could I go look at this guys stuff Sun? Whatever info you know is OK.

*botboy* · 02-15-2004, 02:59 PM

Emailed the guy about the other two trucks, got pics

www.usfamily.net/web/botboy60/Misctrucks

Pics of them here, if any of you guys want parts LMK and I'll see what I can do. I emailed him to see if he would give me a discount on all 3, we'll see what I can pull off...

02-05-2004, 02:41 AM	#1
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	Will be parting out '69 Chev K10, discount parts to SD-MN as I bring it back! Looks like I'm going to be the proud new owner of a 1969 K10 longbed fleetside, less engine and transmission (was supposedly a 350/TH350). Getting it from SD so anyone who needs parts between there and here I can probably stop by and drop them off to avoid shipping costs, if you're really out of my way mebbe a few bucks for gas. If you aren't between there and here, hey, I'll ship to you, no problem you just pay for UPS. I'm putting this thread up as a "dibs" thread where people can claim parts before I get started ripping things apart. Bad/missing: No engine No transmission (was an automatic) Part of grill looks mashed, might be recoverable?? will know when I get closer look Front drivers fender is borked No tailgate No taillights Keeping to myself the cab and bedsides Parts that look good, relatively rustfree: Bed (keeping bedsides to myself, but floor and front section look good) wooden floor. WTB steel floored bed if anyone has one! Doors look good, both of them Descent seat, probably needs recovered (I think bench cant remember) Automatic column Auto crossmember Don't know about dash, haven't got a pic of it yet Glove compartment door front axle/suspension (unknown as of yet) rear axle (also unknown, if its posi you can buy the open 5-bolt carrier out of my '72 C10 ) driveshaft Frame (only when I'm done ripping everything off it) T-case I will have the truck more likely than not, this weekend and then I can take pics of everything. If you want to put in a pic request or make an offer on something or group of somethings, my email is botboy60@hotmail.com.

02-05-2004, 04:48 AM	#2
ltitsnw Registered User Join Date: Dec 2003 Location: Central Iowa Posts: 119	Hi...No hurry, but I might be interested in the rolling chassis with cross memebers, possibly the transfer also.......Thanks Troy __________________ 72 2wd Short Super-almost ready to start on it 95 S10 ZR2-not sure why it followed me home 02 3/4 2wd reg cab-work truck, possible 6.0L donor 06 4x crew-kid hauler, snow chaser

02-05-2004, 11:26 AM	#3
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	I'd be interested in some of the box parts you don't need and the doors if they are nice. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

02-05-2004, 01:03 PM	#5
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Is that the truck in Gregory? When are you going? I may be heading that way to pick up a truck also. Shawn __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

02-05-2004, 03:44 PM	#6
jeffbo D.U.F. Member Join Date: Nov 2002 Location: Huron/Brookings, SD Posts: 288	I may have a steel bed floor for you. I bought a parts truck about 6 months ago that has one, although I'm not real sure of the condition, as it is sitting at my parents house in Huron and I haven't had the chance to tear into it yet. I may be going home this weekend, and I could inspect it and let you know what kind of shape it is in. __________________ MEMBER OF THE DISCS UP FRONT CLUB '72 C-10 LWB Highlander, A/C, tilt TH350 w/ B&M shift kit, 327LJ bored .040", cast flattops, forged crank, L31 Vortecs, 9.25:1 CR, Comp conical valvesprings, Crane Energizer single pattern 216/.454", Professional Products Power Plus Crosswind intake, Edelbrock #1406 600cfm, HEI, dual exhaust, open 3.08 12bolt '68 C-10 4spd (not running) '79 C-10 LWB Mild 350 '80 Caprice Classic, 2-dr '97 GMC K-1500, SWB, Reg. Cab, Z-71, 5.7, Auto

02-06-2004, 11:18 AM	#7
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	where in S.D. are you headed and when? Botboy, where in S.D. are you headed and when? If your out west here, I could meet you and look at some of the stuff I could use that is mot already accounted for; doors,grille stuff,xfer case (if not sold) just kinda whatevers there, i'm going to look at one this weekend east of rapid City maybe they are close together, who knows. E-mail me. ynelson@rushmore.com Bryan in South Dakota __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

02-06-2004, 02:26 PM	#8
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Would it happen to have the sport style bumper on the rear ? I would be interested in the brackets if they are avaible. Mario __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

02-07-2004, 06:55 PM	#9
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	Pics of the truck: (72mario Looks to me like that rear bumper is no good) http://cgi.ebay.com/ebaymotors/ws/eB...EBWA%3AIT&rd=1 67 cst swb, 71swb4x4 - Gregory SD. Currently trying to arrange when I'm going to pick it up, I'll let you know when I am headed out there via email. Jeffbo - my email is botboy60@hotmail (dot) com, would appreciate pics if you could get them. LMK how much you want it and I will see if I can afford it at the moment (just bought a new tach and electric fan for my truck, timeserts for my caddie engine and this truck to boot lol. Otherwise I may be able to make a down payment with the rest coming when I finish parting out this '69)

02-09-2004, 03:08 PM	#10
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	fender How is the passenger fender??? __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

02-09-2004, 03:26 PM	#11
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Botboy That guy has 2 more 67-72 trucks. If it looks like parting the first may be easy maybe you can rob a few parts off the other 2 while you are out there. When I was emailing him he said that he would take an offer for all of the trucks. I was going to buy the other 2 but the wife is having none of that so I thought I would pass the info to you. One is a 67 cab and front clip and the other is a 71 (I think, it may be a 69 or 70). The 71 is more complete. Shawn __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

02-13-2004, 09:25 PM	#12
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	Picking the truck up this monday (presidents day). Anyone who is interested in parts, LMk in this thread or email me.

02-14-2004, 04:46 PM	#13
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	BOTBOY: left you a PM 71swb4X4: what do you know about the 67 (or even if 68) cab and clip, I'm looking for a rebuildable 67/68 cab (A/C or non-A/C)Is is 2wd or 4x4? is it A/T or M/T? was it for sale or just parts? How could I get ahold of the guy? Could I go look at this guys stuff Sun? Whatever info you know is OK. __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White Last edited by 67 cst swb; 02-14-2004 at 04:51 PM.

02-15-2004, 02:59 PM	#14
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	Emailed the guy about the other two trucks, got pics www.usfamily.net/web/botboy60/Misctrucks Pics of them here, if any of you guys want parts LMK and I'll see what I can do. I emailed him to see if he would give me a discount on all 3, we'll see what I can pull off...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.