![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Sep 2015
Location: Brighton UK
Posts: 27
|
UK Ratty V8 327 Mean Green Machine
Hi all,
My name is Mike - I used to be a huge Jap car lover and drifter, and ran a UK forum with about 4000 members - I gave all that up a long time ago and now prefer the quiet life with my girlfriend Carla and my 4 1/2 Month old baby Elvis (Costello not Presley). Some of my car history is 1990 Ford Ranger American Truck R32 GTR Skyline RX7 TT Bathurst Supra Mk 4 TT Several MR2 Turbos MX5 Turbod Mk1 Audi TT Mk1 And lots of other tinned junk (love them all really in their own way) My job and my passion is custom bikes, tattoos and loving life May as well start a build thread for the 3rd love of my life as I intend to keep my truck for a long time. So much character, I just love it. I bought this from a guy in the UK who had it for a couple of months after it was imported from Cali. Its a 64' 327 SB Fleet. She runs a two speed auto box, has no handbrake, has dodgy wiring, no heaters etc - does have a switch for air con though ![]() Here are some pics from the advert I found state side (It had a manual box then - that was swapped by previous owner, leaving me no hand brake) Spec is thus in the USA advert C20 Vintage Camper truck Long Wide Bed. The engine is a Good Running SBC 327 V8, with 12V wiring, New12V battery, New 80 amp one wire alternator, New HEI Distributor with plug and wires, Rebuilt 4 barrel Quadrajet carburetor on a stock manifold with chrome air cleaner and steel valve covers. Original bed (with a couple of holes) This half ton truck sits on new 16” Radial Fat White wall Tires with 8 lug Gold Steelies and drum breaks in the front, 8 lug Gold Steelies and drum in the rear. A lowered ride with 1/2 Ton lowering coils in the rear, 1/2 Ton Lowering coils in the front. First impressions - the brakes SUCK (But getting used to it now) fuel leaks into the cab + the issues I mention above. She now looks like this: ![]() ![]() ![]() ![]() ![]() After a good clearcoat over the patina (I like old and ratty), new interior, hurst shifter (that im cutting as its not a good fit) and small wheel (so I get a work out at the same time as driving) Im about to put a nice coffee sack roof lining in her this evening. And then onto a load cover which I will custom make and reclaimed wood storage box in the back. I love it. Here in Brighton Uk I have had people taking photos etc. My boy Elvis loves it and fell asleep in it within 5 minutes of being on-board - so that's good. Just need to make it louder, safer and cooler haha Hope to post regular updates Mike
__________________
64 C20 327 SBC Cali Truck now living in Brighton UK |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2013
Location: Kent England
Posts: 1,025
|
Re: UK Ratty V8 327 Mean Green Machine
Welcome aboard , you have come to the right place . I have been doing my rebuild as well as helping Rian (Grizz) with his , and the guys on here are very helpful . I believe you have already spoken to Rian on the phone . Keep the pictures coming and we will keep looking
Posted via Mobile Device |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,534
|
Re: UK Ratty V8 327 Mean Green Machine
Welcome Mike
You have certainly chosen the right place to post up and show your Green Machine. Shout if you need me.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Apr 2012
Location: Searcy, AR
Posts: 4,203
|
Re: UK Ratty V8 327 Mean Green Machine
![]() ![]() Glad to see another ol Chevy in the UK... ![]() Rian and Martin will be dropping in on me in a fortnight, and as Martin said, keep the pics coming…
__________________
DON Proverbs 27:17 ![]() US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jul 2013
Location: Essex
Posts: 936
|
Re: UK Ratty V8 327 Mean Green Machine
Cant see all the pictures but looks like a good start.
Welcome aboard Mike! P. ![]() |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Nov 2013
Location: Stanley Co' Durham UK
Posts: 535
|
Re: UK Ratty V8 327 Mean Green Machine
Hi Mike,
Tattoo's, custom bikes and a Chevy truck, your definately in the right place ![]() Ian
__________________
Getting old sucks.............but it sure beats the alternative |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Sep 2015
Location: Brighton UK
Posts: 27
|
Re: UK Ratty V8 327 Mean Green Machine
Thanks guys - Ive already been chatting to Rian - Im about 30 pages into his build thread haha. Then on to Martins.
Thank you for the welcome. I have so much to look at on this site at the weekend Cheers guys
__________________
64 C20 327 SBC Cali Truck now living in Brighton UK |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Sep 2013
Location: Kent England
Posts: 1,025
|
Re: UK Ratty V8 327 Mean Green Machine
When you take a look at my thread you probably see I like bikes as well . It's funny they seem to go hand in hand with these trucks . I myself chose to get a long bed as bikes fit in the back .
__________________
FINALLY PUTTING IT BACK TOGETHER AT LONG LAST MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=611614 |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Sep 2015
Location: Brighton UK
Posts: 27
|
Re: UK Ratty V8 327 Mean Green Machine
Got home and got busy printing
![]() Hmm tried 5 times now - won't display my pic ![]()
__________________
64 C20 327 SBC Cali Truck now living in Brighton UK Last edited by IronAndHeart; 10-02-2015 at 01:53 PM. |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Sep 2015
Location: Brighton UK
Posts: 27
|
Re: UK Ratty V8 327 Mean Green Machine
Thats cool chap.
I have restarted an old photo bucket account now as Dropbox linking is frustrating to say the least. I cannot seem to edit previous posts - so here is my truck at the moment ![]() ![]() And the ridiculous shifter that I was saying about. ![]()
__________________
64 C20 327 SBC Cali Truck now living in Brighton UK Last edited by IronAndHeart; 10-04-2015 at 01:30 PM. |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Sep 2015
Location: Brighton UK
Posts: 27
|
Re: UK Ratty V8 327 Mean Green Machine
__________________
64 C20 327 SBC Cali Truck now living in Brighton UK |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Sep 2015
Location: Brighton UK
Posts: 27
|
Re: UK Ratty V8 327 Mean Green Machine
My other great passion is Tea - so I noshed this out when I got home from work the other night
Got to have the right tool for the job ![]()
__________________
64 C20 327 SBC Cali Truck now living in Brighton UK |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Sep 2015
Location: Brighton UK
Posts: 27
|
Re: UK Ratty V8 327 Mean Green Machine
After a long drive today it is clear that the brakes, just don't work properly. I am stamping on them and its taking a good 10 meters to slow down.
So I need to source some new cylinders from somewhere for the front drums - as I have had a look and they both appear to be leaking out of the drum. FAIL It now changes gear lovely - before it was really hard to go "all the way forward and one back" on the auto box. Also, I tried to wire up a new horn and washer motor to two new switches in the dash, but I must be dumb as I put the switch in line with the positive and even though I was not pressing it, the horn and the washer motor were permenently on! What am I don't wrong? It should be simple
__________________
64 C20 327 SBC Cali Truck now living in Brighton UK |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Jan 2015
Location: Lancashire, UK
Posts: 299
|
Re: UK Ratty V8 327 Mean Green Machine
Welcome to the forum.
from experience rewiring my triuk it appear the switches are wired so that when they are pressed they earth out. Normally it would be wired 12v to the switch and when pressed its supplies 12v to the equipment. I think it is done like this to reduce current flow through the switch. try Topspeed in UK for brake cylinders
__________________
my rides 59 GMC Apache fleetside http://67-72chevytrucks.com/vboard/s...d.php?t=684337 68 VW Westy camper |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Apr 2012
Location: Searcy, AR
Posts: 4,203
|
Re: UK Ratty V8 327 Mean Green Machine
In the event you want to reuse that shifter, Mark in Spokane, Washington has a write up within his thread concerning a spacer plate to relocate the shifter to avoid that issue… Here's a link to his thread…
http://67-72chevytrucks.com/vboard/s...d.php?t=444502 Not sure what page it's on, he's a great guy so if you are interested in it, PM him, he may know what page it's on… Cheers! ![]()
__________________
DON Proverbs 27:17 ![]() US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Sep 2015
Location: Brighton UK
Posts: 27
|
Re: UK Ratty V8 327 Mean Green Machine
Thanks for the Electrical tips and the shifter tip.
I will give the electrics another pop at the weekend using the switch in line with earth. As for the shifter, to be honest it was a bit "bling" for me anyway. So its in the bin now - Thank you though. The nights a drawing in here so by the time I finish work there is no daylight ![]() I have noticed that the previous owner bought and fitted new (original) exterior locks and handles - however they do not lock. I was chatting to a guy the other day who said "they never lock, you have to take them apart and take a bit out - then they work". Is this true ? Just ordered my military canvas for the rear bed. ![]() Should be fun fitting and cutting it
__________________
64 C20 327 SBC Cali Truck now living in Brighton UK |
![]() |
![]() |
![]() |
#17 | |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,534
|
Re: UK Ratty V8 327 Mean Green Machine
Quote:
Mike, Have you thought of how to attach the canvas? Mine had some sash window rope sewn into one end and that then slid into a slotted, fixed C shaped groove. You can buy DIY brass tent/groundsheet eyelets from Camping International or online to create a row of eyes to thread some rope through and then fix to hooks around the edge, unless you are able to create some kind of framework. I like this sort of modding as its off the normal pace.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Sep 2015
Location: Brighton UK
Posts: 27
|
Re: UK Ratty V8 327 Mean Green Machine
Hi Grizz,
Well one of two ways - Im either going to put one bungy along each length of the canvas (I will add a few eyelets in to help secure/tension it) and the use simple riveted hooks on the body work or use a bungy ball on each eyelet - and again with the hooks Once I get it I will have a look and see what is A) Most practical B) What is in keeping with the patina look C) What isnt going to be a huge job that never gets finished before the winter. PS - Thanks for the photobucket hint. Bloody dropbox ![]()
__________________
64 C20 327 SBC Cali Truck now living in Brighton UK |
![]() |
![]() |
![]() |
#19 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,895
|
Re: UK Ratty V8 327 Mean Green Machine
Like the look of your truck. Looks like a good project.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Sep 2015
Location: Brighton UK
Posts: 27
|
Re: UK Ratty V8 327 Mean Green Machine
Thanks Palf.
My other car isnt getting a look in at the moment
__________________
64 C20 327 SBC Cali Truck now living in Brighton UK |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Sep 2013
Location: Kent England
Posts: 1,025
|
Re: UK Ratty V8 327 Mean Green Machine
I no that feeling . I have two bikes with a list of jobs , and two cars I haven't touched for ages .
__________________
FINALLY PUTTING IT BACK TOGETHER AT LONG LAST MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=611614 |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Sep 2015
Location: Brighton UK
Posts: 27
|
Re: UK Ratty V8 327 Mean Green Machine
Here is some pics of my other beast. A low mileage 300c - fully blacked out.
Absolutely mint condition - I love this car. (Its not the Hemi - dont tell everyone) ![]() ![]() They get a bit of a bad rep for issues, but this one is perfect. Had the rims refirbed too - I do have drop springs to go on it, but as the roads here in Brighton are terrible Ive never fitted them. Thinking about selling her soon and getting something as a runabout, as my girlfriend cant get insured on this
__________________
64 C20 327 SBC Cali Truck now living in Brighton UK |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,534
|
Re: UK Ratty V8 327 Mean Green Machine
300C
My Father in Laws favourite car. He always loved big cars and this is his Lottery car.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Sep 2015
Location: Brighton UK
Posts: 27
|
Re: UK Ratty V8 327 Mean Green Machine
Its actually dead good on fuel too - for what it is.
Trouble with having a younger girlfriend is the insurance though. Im an old man so its cheap.
__________________
64 C20 327 SBC Cali Truck now living in Brighton UK |
![]() |
![]() |
![]() |
#25 | |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,534
|
Re: UK Ratty V8 327 Mean Green Machine
Quote:
![]()
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
|
![]() |
![]() |
![]() |
Bookmarks |
Tags |
327, brighton, c20, hamhauler, sussex |
|
|