![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Seņor Member
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
|
Can someone make me an exhaust tip?
Last year I was talking with Dr. Gas about making this for me, but then they flaked out and "disappeared." So now I'm back on the trail to find someone to make me one of these. Pics below are of a car Dr. Gas did, and a dim sketch of what I want done. I made a wooden buck with plans of bending up one myself but I simply don't have time outside of work to get much done. Dr. Gas sells ovalized tube, which is what I was going to use as my base, then split it and weld in flat sheet to get the dimensions I need. If you have a better method, I'm fine with that... I just want the tip done. Anyone?
__________________
|
![]() |
![]() |
![]() |
#2 |
Seņor Member
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
|
Re: Can someone make me an exhaust tip?
You can see the wooden buck in this pic just below the license plate. Also, here's an alternate "log" design that might be easier to make. The log would have to be flush with the tip part on the bottom so it wouldn't be visible from behind the truck.
__________________
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Can someone make me an exhaust tip?
That will look awesome. I can show the drawing to the guys that made my exhaust and see if they can make it for you.
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
![]() |
![]() |
![]() |
#4 |
Old Skool Club
![]() Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: Can someone make me an exhaust tip?
Wow! Have you heard how this sounds? Is it that you are after a "look", or is there another aspect of the project that my damaged brain isn't considering? What's up with those holes that are in the bottom of the unit? I suppose that backpressure would be nearly eliminated. That whole syetem, as shown in the pix, is thought-provoking. I am wondering just what is driving this, short of the desire to be different....which is definately not lost on me.
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
![]() |
![]() |
![]() |
#5 |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
|
Re: Can someone make me an exhaust tip?
I thought the same thing. On closer inspection, it appears those are heat spots from weld. I'll guess that it has internal dividers for support.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 03-07-2009 at 10:28 PM. |
![]() |
![]() |
![]() |
#6 | |
Seņor Member
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
|
Re: Can someone make me an exhaust tip?
Quote:
The reason I want this kind of tip is aesthetic. The shape mimics that of the taillights, and so ties things together visually. The truck is also in inline six, so a single exhaust makes sense.
__________________
|
|
![]() |
![]() |
![]() |
#7 |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
|
Re: Can someone make me an exhaust tip?
Is there room to make a recess in the roll pan to tuck it up a bit? That would give it a bit of impact as well.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
![]() |
![]() |
![]() |
#8 | |
Seņor Member
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
|
Re: Can someone make me an exhaust tip?
Quote:
![]() Like this...
__________________
|
|
![]() |
![]() |
![]() |
#9 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: Can someone make me an exhaust tip?
I could make that. It would take me a week or two, but I could do it. I'd put some kind of supports throughout the center of the cavity like the Dr Gas unit must have to keep the flat upper and lower expanses from being too flimsy. I'd make the two round rolled sides by slicing a piece of 1.5 inch tubing in half lengthwise then welding triangles to the top and bottom to make the box..
__________________
I'm on the Instagram- @Gearhead_Kevin Last edited by Tx Firefighter; 03-08-2009 at 06:01 PM. |
![]() |
![]() |
![]() |
#10 |
Seņor Member
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
|
Re: Can someone make me an exhaust tip?
I think we're mostly in synch! A little bit of this in the inlet side to make it round, and then the 2.5" 90° on there, and I think it's golden.
![]()
__________________
|
![]() |
![]() |
![]() |
#11 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: Can someone make me an exhaust tip?
I'm working on it now.
How long do you want the tip to be from edge of the rear opening to the center of the 2.5 opening ? I've got the 1.5 inches tall and 15.5 inches wide dimensions. Also, what do you think about a hanger bracket on top for adding a rear exhaust hanger ? I think as snug as it's going to be to the roll pan, a rear hanger will be needed to keep it from bouncing around and hitting the truck.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#12 |
Like a Rock!
Join Date: May 2002
Location: USA
Posts: 1,092
|
Re: Can someone make me an exhaust tip?
xxl- do you think the sound will be "unusual" at all being squished down to 1.5"? Just curious. Cool idea
![]()
__________________
69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park! ![]() |
![]() |
![]() |
![]() |
#13 | |
Seņor Member
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
|
Re: Can someone make me an exhaust tip?
Quote:
See attached pic. I have to snake around to hit the muffler anyway (I can't move the muffler forward because of rearend clearance), so the depth of the cone is more about making it deep enough so it doesn't look funny when you're staring down the opening from the back of the truck.
__________________
|
|
![]() |
![]() |
![]() |
#14 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: Can someone make me an exhaust tip?
Can you get me a measurement ? Would 12-15 inches be too long ? I want to make sure it looks good from the back and the deeper the better on that.
__________________
I'm on the Instagram- @Gearhead_Kevin Last edited by Tx Firefighter; 03-14-2009 at 05:39 PM. |
![]() |
![]() |
![]() |
#15 |
Seņor Member
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
|
Re: Can someone make me an exhaust tip?
15" for the dim in your pic above would work great.
__________________
|
![]() |
![]() |
![]() |
#16 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: Can someone make me an exhaust tip?
Also, what if I made it more boxy instead of triangular ?
I think it would tend to look better from the rear.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#17 |
Seņor Member
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
|
Re: Can someone make me an exhaust tip?
Agreed. The triangle approach was intended to simplify the build, but at the cost of seeing the side walls when looking down the throat. As you can see in the Camaro in my first post, they went with a rectangle with round ends, then made the cone(s) later.
__________________
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Aug 2007
Location: Greenfield, MO
Posts: 215
|
Re: Can someone make me an exhaust tip?
That looks freakin suhweet!!!!
|
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Aug 2007
Location: Greenfield, MO
Posts: 215
|
Re: Can someone make me an exhaust tip?
what would be sweet is to add red LED's to the edges and turn it into one Bad-A third brake light :-D
|
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Mar 2008
Location: cullom, illinois
Posts: 20
|
Re: Can someone make me an exhaust tip?
![]() |
![]() |
![]() |
![]() |
#21 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: Can someone make me an exhaust tip?
It's done...
![]() I'm not happy with the final product. If you like what you see, we will discuss the price. I'm going to knock some off of the original estimate. I have got to buy me a TIG welder for sure. The MIG didn't do exactly what I needed on this job.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#22 |
Blaze-Air
Join Date: Nov 2008
Location: Virginia
Posts: 1,117
|
Re: Can someone make me an exhaust tip?
TX, I was thinking a smaller version might look good as a side dump tip, kinda has a Nascar look. I may have you make some tips for me when I get some dimension idea's.
I'm thinking with exhaust running at an angle from mufflers to the planned exit area, the tip would need a 45 degree cut to run flush with body. Just thinking out loud. I don't know how to put a pic up of my thought's. ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|