AZ Two SWB Driveshafts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mahanian · 04-12-2014, 08:21 PM

I have two SWB driveshafts, one 2-piece that was behind a TH-400 and one 1-piece that was behind a 4-speed. I'd like $118 each shipped or $80 each picked up.

wgeyer88 · 04-12-2014, 08:35 PM

I'm looking for a th400 slip yoke to use on my 4l80e if you're willing to split it up.

Thanks
-Will

mahanian · 04-12-2014, 10:08 PM

Thanks but I'd rather sell them as a complete driveshaft unless a buyer wants the driveshaft without the TH400 yoke.

wgeyer88 · 04-12-2014, 10:18 PM

No problem, I completely understand.

Thanks

mmiddle · 04-12-2014, 11:27 PM

where in AZ are you? My kid goes to Embry-Riddle in Prescott. I might be interested in the TH400 shaft.

mahanian · 04-12-2014, 11:42 PM

I'm in the Phoenix area

**ScottH** · 04-13-2014, 10:28 AM

jared can u tell me the length of the 1 piece when u get a chance?
No hurry on my end.

Thanks
Scott

mahanian · 04-13-2014, 04:22 PM

Hey Scott, the 1 piece is 56"-56 1/4" between U-joint centerlines, a little hard to measure by myself

**ScottH** · 04-13-2014, 11:22 PM

Thanks for checking, it may be a bit b4 I know exactly what length I need.
Will check back with u then to see if it is still available.

Scott

tsmith · 04-14-2014, 12:28 AM

Does the 2 piece come with the carrier bearing?

mahanian · 04-14-2014, 02:18 PM

yep, it's still on it

tsmith · 04-14-2014, 09:25 PM

Do you have any pics of the two piece and do you do paypal

OLEBEATER · 04-15-2014, 09:15 AM

I am interested in the 1 piece shaft. I will checek the length I need toninght and let you know. I am in virginia, will the $118 be the same? Thanks.........Ro

mahanian · 04-15-2014, 01:11 PM

Quote:

Originally Posted by tsmith

Do you have any pics of the two piece and do you do paypal

I will get some pics tonight, paypal works if you are willing to cover the fees.

Quote:

Originally Posted by OLEBEATER

I am interested in the 1 piece shaft. I will checek the length I need toninght and let you know. I am in virginia, will the $118 be the same? Thanks.........Ro

Ok, let me know, yes that price will cover shipping

mahanian · 04-18-2014, 06:26 PM

Sorry for the delay, here are the pictures. They are both in good shape and could be used as is but I would recommend replacing the U-joints just as a maintenance thing, I'm sure they are either original or really old. I greased and bagged the slip yokes to prevent rusting (I bought the 1 piece used so it had surface rust already) so you will need to clean them and steel wool them.

mahanian · 04-18-2014, 07:17 PM

1-piece sold pending payment

mahanian · 05-10-2014, 02:52 PM

The one piece is sold but I still have the 2 piece driveshaft for sale with the beefy TH400 yoke

mahanian · 02-23-2015, 09:18 PM

ttt

**70STOVEBOLT** · 02-24-2015, 08:23 PM

Do you know if the 2-PC shaft is the correct length for a big block?

Thanks,
Mark

mahanian · 02-25-2015, 12:58 PM

I'm not sure if the motor size shifts the transmission position, I thought the motor mounts accounted for that. I've only seen driveshaft lengths categorized by transmission and bed length. There is only one set of transmission cross member mounting holes on my frame so I think the transmission is always in the same spot

kaphillips · 02-25-2015, 05:07 PM

I am not that far in Amarillo TX, would you take an offer of 90 shipped to me in Amarillo on the 2 piece ds with th400 yoke. Please and pretty please.

mahanian · 02-25-2015, 06:59 PM

Sorry bud, it's going to cost me at least $35 to ship it due to its length so I can't go that low

bntmotorcycles · 02-26-2015, 05:58 PM

I will take the 2piece shaft. It is for 115" chassis? $118 shipped correct? Art. 317-835-4544

mahanian · 02-26-2015, 06:52 PM

Quote:

Originally Posted by bntmotorcycles

I will take the 2piece shaft. It is for 115" chassis? $118 shipped correct? Art. 317-835-4544

Yes, it's from my short bed, $118 shipped. I'll send you a PM.

04-12-2014, 08:21 PM	#1
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Two SWB Driveshafts I have two SWB driveshafts, one 2-piece that was behind a TH-400 and one 1-piece that was behind a 4-speed. I'd like $118 each shipped or $80 each picked up. __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

04-12-2014, 08:35 PM	#2
wgeyer88 Registered User Join Date: Aug 2012 Location: Denver, Co Posts: 245	Re: Two SWB Driveshafts I'm looking for a th400 slip yoke to use on my 4l80e if you're willing to split it up. Thanks -Will __________________ Will 1970 CST10 SWB LQ4/4L80E 2004 Silverado (sold) 2007.5 Dodge Ram 2500

04-12-2014, 10:08 PM	#3
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two SWB Driveshafts Thanks but I'd rather sell them as a complete driveshaft unless a buyer wants the driveshaft without the TH400 yoke. __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

04-12-2014, 10:18 PM	#4
wgeyer88 Registered User Join Date: Aug 2012 Location: Denver, Co Posts: 245	Re: Two SWB Driveshafts No problem, I completely understand. Thanks __________________ Will 1970 CST10 SWB LQ4/4L80E 2004 Silverado (sold) 2007.5 Dodge Ram 2500

04-12-2014, 11:27 PM	#5
mmiddle Registered User Join Date: Jul 2013 Location: Forestburg, Texas Posts: 659	Re: Two SWB Driveshafts where in AZ are you? My kid goes to Embry-Riddle in Prescott. I might be interested in the TH400 shaft. __________________ Mark Jesus is the Way! 2003 2500HD CCLB Duramax/Ali (Clifford) 2014 2SS/RS black on black Camaro (Betty) 2006 Pontiac SOLSTICE silver/black (Lula-Bell) 1970 C/10 Short Wide (Peggy) 1964 C/10 Short Step (Hambone) RIP Jimmy Hamilton Thank you for the trucks

04-12-2014, 11:42 PM	#6
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two SWB Driveshafts I'm in the Phoenix area __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

04-13-2014, 10:28 AM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Two SWB Driveshafts jared can u tell me the length of the 1 piece when u get a chance? No hurry on my end. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-13-2014, 04:22 PM	#8
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two SWB Driveshafts Hey Scott, the 1 piece is 56"-56 1/4" between U-joint centerlines, a little hard to measure by myself __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

04-13-2014, 11:22 PM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Two SWB Driveshafts Thanks for checking, it may be a bit b4 I know exactly what length I need. Will check back with u then to see if it is still available. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-14-2014, 12:28 AM	#10
tsmith Registered User Join Date: Feb 2012 Location: OKC, Ok Posts: 140	Re: Two SWB Driveshafts Does the 2 piece come with the carrier bearing?

04-14-2014, 02:18 PM	#11
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two SWB Driveshafts yep, it's still on it __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

04-14-2014, 09:25 PM	#12
tsmith Registered User Join Date: Feb 2012 Location: OKC, Ok Posts: 140	Re: Two SWB Driveshafts Do you have any pics of the two piece and do you do paypal

04-15-2014, 09:15 AM	#13
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: Two SWB Driveshafts I am interested in the 1 piece shaft. I will checek the length I need toninght and let you know. I am in virginia, will the $118 be the same? Thanks.........Ro

04-18-2014, 06:26 PM	#15
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two SWB Driveshafts Sorry for the delay, here are the pictures. They are both in good shape and could be used as is but I would recommend replacing the U-joints just as a maintenance thing, I'm sure they are either original or really old. I greased and bagged the slip yokes to prevent rusting (I bought the 1 piece used so it had surface rust already) so you will need to clean them and steel wool them. Attached Images __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

04-18-2014, 07:17 PM	#16
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two SWB Driveshafts 1-piece sold pending payment __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS



Register or Log In To remove these advertisements.

05-10-2014, 02:52 PM	#17
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two SWB Driveshafts The one piece is sold but I still have the 2 piece driveshaft for sale with the beefy TH400 yoke __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

02-23-2015, 09:18 PM	#18
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two SWB Driveshafts ttt __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

02-24-2015, 08:23 PM	#19
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: Two SWB Driveshafts Do you know if the 2-PC shaft is the correct length for a big block? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

02-25-2015, 12:58 PM	#20
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two SWB Driveshafts I'm not sure if the motor size shifts the transmission position, I thought the motor mounts accounted for that. I've only seen driveshaft lengths categorized by transmission and bed length. There is only one set of transmission cross member mounting holes on my frame so I think the transmission is always in the same spot __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

02-25-2015, 05:07 PM	#21
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: Two SWB Driveshafts I am not that far in Amarillo TX, would you take an offer of 90 shipped to me in Amarillo on the 2 piece ds with th400 yoke. Please and pretty please.

02-25-2015, 06:59 PM	#22
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two SWB Driveshafts Sorry bud, it's going to cost me at least $35 to ship it due to its length so I can't go that low __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

02-26-2015, 05:58 PM	#23
bntmotorcycles Registered User Join Date: Nov 2005 Location: midwest Posts: 211	Re: Two SWB Driveshafts I will take the 2piece shaft. It is for 115" chassis? $118 shipped correct? Art. 317-835-4544

Register or Log In To remove these advertisements.