New Ridler 645's to be available shortly - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ksbrktracer · 11-08-2013, 02:27 AM

Will be available just shortly , In Chrome, Gray and Black and in 20". I have better pictures , I just cant get them loaded right now from the motel. Looks alot like the Boyds Magneto Wheel

ksbrktracer · 11-12-2013, 12:15 PM

Heres a Couple of better pictures of the new Ridler 645's .... 17's & 18's on the way , 20"s will be sometime around the first of the year. Painted versions shown and CHROME should be available also.

rickairbound1 · 02-10-2015, 09:41 PM

Quote:

Originally Posted by ksbrktracer

Heres a Couple of better pictures of the new Ridler 645's .... 17's & 18's on the way , 20"s will be sometime around the first of the year. Painted versions shown and CHROME should be available also.

I've got a 72 C10 lowered 2/4 with stock front disc and rear drum. I'd like 20X8.5 all around in the all chrome 645s. Can I get a quote plus caps, lugs and shipping to San Antonio, TX.

Thanks, Rick

OARNGESI · 11-14-2013, 09:22 AM

how much are the 20s going to run in black and are the offered in 5x4.75

ksbrktracer · 11-14-2013, 04:23 PM

Quote:

Originally Posted by OARNGESI

how much are the 20s going to run in black and are the offered in 5x4.75

They are going to build the wheel in black, gray and chrome 20" with 5on4-3/4 bp as well as 5 on4-1/2 , 5on5 and I think 5on5-1/2 ,

they should be 20X8.5 with 4.75 BS and 20X10 with 5.5 BS

20X8.5 will be $190.00 each + shpg for Black or Gray finish
20X10.0 will be $213.00 each + shpg for Black or Gray finish

20X8.5 will be $242.00 each + shpg for Chrome finish
20X10.0 will be $268.00 each + shpg for Chrome finish

Prices are estimates only right now, but I think they are Right or very close, wont know positively until they build them.

as soon as they are available in 20", approximately 1st of the year ,

there 17's in the warehouses now.
SIZES that will be available will be

17X7.0
17x8.0
18X8.0
18x9.5
20X8.5
20x10.0

DROP SHIPPING IS AVAILABLE ....... HELPS SAVE ON THE FREIGHT.

**twotrucks** · 11-15-2013, 07:12 PM

Will these backspaces work with '72 truck?

darkhorse970 · 11-15-2013, 07:23 PM

I'd like to see the backspaces available for all sizes in 5x5.

long'n low · 11-15-2013, 08:00 PM

Damn where were these 8 mnths ago!

ksbrktracer · 11-15-2013, 08:51 PM

Quote:

Originally Posted by twotrucks

Will these backspaces work with '72 truck?

Yes they will work on a 72 truck. If it is extremely lowered you would truly want a 5.25 or 5.5 BS for the front. They only build a 4.75 BS 20X8.5 ..... right now.

Quote:

Originally Posted by darkhorse970

I'd like to see the backspaces available for all sizes in 5x5.

I will get those #s for you and get them posted in this thread.

Quote:

Originally Posted by long'n low

Damn where were these 8 mnths ago!

exactly what I thought when I saw them ...... They are BADASS in Person

cst69 · 11-17-2013, 08:15 PM

Hey Tommy, glad to see you expanding. Gotta have a set of 20 x 8.5 & 20 x 10 for the 92. Does the backspace work for a 92 RCSB that is tucked on it's rails?

Anyway you can help me to unload the 695's I got from you months ago NIB? Just asking, I am sure I can sell them local here. Let me know about the backspace and when they will be available in 20" black!

Thanks, Ken

ksbrktracer · 11-19-2013, 11:36 AM

Quote:

Originally Posted by cst69

Hey Tommy, glad to see you expanding. Gotta have a set of 20 x 8.5 & 20 x 10 for the 92. Does the backspace work for a 92 RCSB that is tucked on it's rails?

I just put 20X8.5 BOSS 338 with 5.25 BS on My 93 Pace Truck. I used a 245/40/20 on the front and a 275/40/20 on the rear with a 4/6 Drop. 4.75 Backspace will not work on the front lowered. I dont know about a 10" on the back yet .... I am gonna try it , but havent done it yet

Anyway you can help me to unload the 695's I got from you months ago NIB? Just asking, I am sure I can sell them local here. Let me know about the backspace and when they will be available in 20" black!

Thanks, Ken

Freight is probably gonna make it difficult. I know they will sell on here as Those wheels are on backorder at this moment and I have people inquiring. If I get someone in your neck of the woods I will send them your way.

17X7.0 = ........
17X8.0 = ........
18X8.0 = .........4.50 BS
18X9.5 = ........ 5.25 BS
20X8.50 = ........ 4.75 BS
20X10.0 = .........5.50 BS

Im pretty sure on these BS #'s but not 100% positive yet as the wheels are still in production.... Warehouse does not have part #'s yet.

ksbrktracer · 11-23-2013, 01:13 AM

To the Top .........

custom97 · 11-27-2013, 10:39 AM

Quote:

Originally Posted by cst69

Hey Tommy, glad to see you expanding. Gotta have a set of 20 x 8.5 & 20 x 10 for the 92. Does the backspace work for a 92 RCSB that is tucked on it's rails?

Anyway you can help me to unload the 695's I got from you months ago NIB? Just asking, I am sure I can sell them local here. Let me know about the backspace and when they will be available in 20" black!

Thanks, Ken

How much you asking for the 695's?

cst69 · 11-27-2013, 04:58 PM

hey Custom67, the 695's are 18 x 8 & 18 x 9.5 sizes, pm me so that no one get's in any trouble here

markiemark · 11-23-2013, 01:28 AM

NICE!! Thanks

ksbrktracer · 11-23-2013, 01:30 AM

Another Picture

naisugai · 11-26-2013, 01:25 AM

Request a quote for four 18 x 8's in gray.

Thanks!

ksbrktracer · 11-26-2013, 10:37 AM

Quote:

Originally Posted by naisugai

Request a quote for four 18 x 8's in gray.

Thanks!

Chrome is the only thing available right now .... Still a little bit on other finishes.
If chrome would interest you , they would run $216.00 each + shpg.

swanga c10 · 11-27-2013, 07:52 AM

I'm interested in a set of the 20's in the staggered sizes. Please let me know once prices are confirmed and they are available.

ksbrktracer · 11-27-2013, 10:15 AM

Quote:

Originally Posted by swanga c10

I'm interested in a set of the 20's in the staggered sizes. Please let me know once prices are confirmed and they are available.

Absolutely .....!

knomadd · 12-13-2013, 01:43 PM

Please let me know if they decide to use a 5.25" backspacing on the 20x8.5 in chrome. *fingers crossed* I'd love a set of 20x8.5 and 20x10 for my 71, but I'm putting air bags on it and I want the fronts to tuck when aired out. It won't be sitting on the frame, but I'm still fairly sure a 4.75" bs won't work for my setup.

ksbrktracer · 12-13-2013, 06:12 PM

Quote:

Originally Posted by knomadd

Please let me know if they decide to use a 5.25" backspacing on the 20x8.5 in chrome. *fingers crossed* I'd love a set of 20x8.5 and 20x10 for my 71, but I'm putting air bags on it and I want the fronts to tuck when aired out. It won't be sitting on the frame, but I'm still fairly sure a 4.75" bs won't work for my setup.

That was the first question I asked when I was looking at them .... I hope they make it in the 5.25 backspace too.....!

I will post up as soon as I know .... !

knomadd · 12-19-2013, 06:20 PM

Any news yet??? I'm getting excited...although impatient.

markiemark · 12-19-2013, 06:27 PM

Me too. I'm still looking at other wheels but these are my 1st choice.. 20" all around... Build these suckers already!!!

tsmith · 01-19-2014, 03:52 PM

Can you quote me some 17x8's for 77 chevy in chrome 5 lug

11-08-2013, 02:27 AM	#1
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	New Ridler 645's to be available shortly Will be available just shortly , In Chrome, Gray and Black and in 20". I have better pictures , I just cant get them loaded right now from the motel. Looks alot like the Boyds Magneto Wheel Attached Images

11-12-2013, 12:15 PM	#2
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: New Ridler 645's to be available shortly Heres a Couple of better pictures of the new Ridler 645's .... 17's & 18's on the way , 20"s will be sometime around the first of the year. Painted versions shown and CHROME should be available also. Attached Images Last edited by ksbrktracer; 11-14-2013 at 09:10 PM.

11-14-2013, 09:22 AM	#4
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: New Ridler 645's to be available shortly how much are the 20s going to run in black and are the offered in 5x4.75 __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

11-15-2013, 07:12 PM	#6
twotrucks Junior Member Join Date: Jun 2003 Location: Louisville,Ky Posts: 383	Re: New Ridler 645's to be available shortly Will these backspaces work with '72 truck?

11-15-2013, 07:23 PM	#7
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,105	Re: New Ridler 645's to be available shortly I'd like to see the backspaces available for all sizes in 5x5. __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

11-15-2013, 08:00 PM	#8
long'n low Registered User Join Date: Oct 2013 Location: Kelowna BC Posts: 51	Re: New Ridler 645's to be available shortly Damn where were these 8 mnths ago!

11-17-2013, 08:15 PM	#10
cst69 Hollywood Join Date: Sep 2006 Location: Asheboro, N.C. Posts: 265	Re: New Ridler 645's to be available shortly Hey Tommy, glad to see you expanding. Gotta have a set of 20 x 8.5 & 20 x 10 for the 92. Does the backspace work for a 92 RCSB that is tucked on it's rails? Anyway you can help me to unload the 695's I got from you months ago NIB? Just asking, I am sure I can sell them local here. Let me know about the backspace and when they will be available in 20" black! Thanks, Ken __________________ 1968 cSSt shortbed 1971 custom deluxe shortbed frame off 1991 caddilac escalade ST shortbed 1992 chevy ext. cab Project: leftovers 2003 Silverado ext. cab shortbed (my dad's truck R.I.P.) 1969 trans am clone, pro tour 1985 Yamaha Vmax, custom 1993 Yamaha Vmax, showbike 1969 Sears Suburban SS12 lawn tractor

11-23-2013, 01:13 AM	#12
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: New Ridler 645's to be available shortly To the Top ......... Last edited by ksbrktracer; 11-23-2013 at 01:31 AM.

11-27-2013, 04:58 PM	#14
cst69 Hollywood Join Date: Sep 2006 Location: Asheboro, N.C. Posts: 265	Re: New Ridler 645's to be available shortly hey Custom67, the 695's are 18 x 8 & 18 x 9.5 sizes, pm me so that no one get's in any trouble here __________________ 1968 cSSt shortbed 1971 custom deluxe shortbed frame off 1991 caddilac escalade ST shortbed 1992 chevy ext. cab Project: leftovers 2003 Silverado ext. cab shortbed (my dad's truck R.I.P.) 1969 trans am clone, pro tour 1985 Yamaha Vmax, custom 1993 Yamaha Vmax, showbike 1969 Sears Suburban SS12 lawn tractor

11-23-2013, 01:28 AM	#15
markiemark Registered User Join Date: Nov 2013 Location: NYC Posts: 164	Re: New Ridler 645's to be available shortly NICE!! Thanks

11-23-2013, 01:30 AM	#16
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: New Ridler 645's to be available shortly Another Picture Attached Images

11-26-2013, 01:25 AM	#17
naisugai Registered User Join Date: Oct 2012 Location: Oak Harbor, WA Posts: 40	Re: New Ridler 645's to be available shortly Request a quote for four 18 x 8's in gray. Thanks!

11-27-2013, 07:52 AM	#19
swanga c10 Registered User Join Date: Sep 2012 Location: Australia Posts: 41	Re: New Ridler 645's to be available shortly I'm interested in a set of the 20's in the staggered sizes. Please let me know once prices are confirmed and they are available.

12-13-2013, 01:43 PM	#21
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: New Ridler 645's to be available shortly Please let me know if they decide to use a 5.25" backspacing on the 20x8.5 in chrome. fingers crossed I'd love a set of 20x8.5 and 20x10 for my 71, but I'm putting air bags on it and I want the fronts to tuck when aired out. It won't be sitting on the frame, but I'm still fairly sure a 4.75" bs won't work for my setup. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

12-19-2013, 06:20 PM	#23
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: New Ridler 645's to be available shortly Any news yet??? I'm getting excited...although impatient. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)



Register or Log In To remove these advertisements.

12-19-2013, 06:27 PM	#24
markiemark Registered User Join Date: Nov 2013 Location: NYC Posts: 164	Re: New Ridler 645's to be available shortly Me too. I'm still looking at other wheels but these are my 1st choice.. 20" all around... Build these suckers already!!!

01-19-2014, 03:52 PM	#25
tsmith Registered User Join Date: Feb 2012 Location: OKC, Ok Posts: 140	Re: New Ridler 645's to be available shortly Can you quote me some 17x8's for 77 chevy in chrome 5 lug

Register or Log In To remove these advertisements.