2WD Blazer Lowering Kit?

[Roadrage]

My buddy wants me to find him the parts to lower his '72 Chevy 2WD Blazer (Front disc/Rear drum). He was thinking 4"-6" or 5"-7" static drop, springs, spindles, c-notch? Anybody know what parts are needed and specifically who carries them for a decent price?

Any help would be greatly appreciated..

I have a couple ideas where to start looking, just haven't called yet:

www.performancesuspension.com
www.sporttruckdirect.com
Thanks

[bouncytruck]

Call Wes at ClassicHeartbeat.com. He's in Olympia. Then, tell you're buddy to join the forums and post some pictures of his blazer.

Where in WA are you?

[lks dcvn]

I am going with a 2.5" front spindle drop and a 4" spring drop on the rear of my 2wd Blazer.

Front Stock Springs/Shocks
Rear Drop Shocks/Springs
Shock Relocators
Adjustable Panhard Bar

All the stuff is from ECE (Early Classic Enterprises) - www.earlyclassic.com

But Bouncy hit the nail on the head - find the closest distributor to save on shipping $.

[Roadrage]

Thanks for the replies. I was looking at some stance pics on those websites, and came across a pic of a 2WD Blazer with a 3 1/2"/6" Drop and that looked about perfect. If he does a 6" drop in the rear does that require a c-notch kit?

http://www.earlyclassic.com/tech.asp...tance Photos-3

[lolife99]

Originally Posted by Roadrage

Thanks for the replies. I was looking at some stance pics on those websites, and came across a pic of a 2WD Blazer with a 3 1/2"/6" Drop and that looked about perfect. If he does a 6" drop in the rear does that require a c-notch kit?

http://www.earlyclassic.com/tech.asp...tance Photos-3

I would. Before I bagged my blazer I had a 6" rear spring and the axle tube would bottom out on the frame on hard bumps.

[Classic Heartbeat]

My buddy wants me to find him the parts to lower his '72 Chevy 2WD Blazer (Front disc/Rear drum). He was thinking 4"-6" or 5"-7" static drop, springs, spindles, c-notch? Anybody know what parts are needed and specifically who carries them for a decent price?

71-72 2 1/2" lowering spindles
63-72 2" or 3" front lowering springs (depending on how low he wants to go)
63-72 2" front lowering shocks
63-72 4,5, or 6" rear lowering springs (depending on how low he wants to go)
63-72 1, or 2" rear lowering blocks (depending on how low he wants to go)
67-72 "C" Notch Kit
63-72 4" Rear lowering shocks
63-72 Adjustible Super Pan Hard Bar kit

I think that about covers the list, besides maby some nuts, bolts, tie rods ends, or ball joints if they turn out to be in bad condition when you take it apart. We do cary all of this stuff also. WES

[raggedjim]

Panhard bar keeps the rearend centered. I drove a truck once without one and it took curves like a drunk sailor...

By the way, the 69-72 2wd blazer suspension is exactly the same as the 67-72 truck suspension (trailing arm setup...)

Rg

[70rs/ss]

I'll say this, the 4" springs I just put on lks dcvn 2wd Blazer went at least 5" maybe 6" as they are "truck springs" and the blazer has that 3-400 lbs on it. I'd really go with a 5" spring, to be safe??

[Classic Heartbeat]

Thanks Tom.

Wes I'll probably be contacting you with what my needs will be shortly

I look forward to hearing from you. Like stated above the pan hard bar keeps the rear end centered. The super pan hard bar keeps the rear end centered while maintaining the angle necessary to keep the rear end stable. WES

[LUV2XCLR8]

I went 2.5 spindles, 3" springs up front, 5" springs, 1" blocks in rear, adjustable P bar, c-notch, and shock re-locater brackets.

[Roadrage]

You guys have any pics of your 2WD Blazers lowered? And the drop heights?

[lolife99]

This is my blazer before bagging it.

The front is a 5.5" drop and the rear is a 6" drop.
Tire are 215/70-15's and 275/60-15's on 7" and 8" ralleys.

[Scotty W]

I bought a Stage 3 performance lowering kit from brotherstrucks.com
It came with drop spindles,drop
springs,c-notch,heavy duty front &
rear sway bars,panhard bar & doetch tech shocks.It cost around
$1000.00.I believe its a 4/6 drop