![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
What I got Done This Weekend
I finally rebuilt the door lock assemblies and rebuilt the door hinges. Also installed the stainless radiator cover I made..........
__________________
1997 GMC Sierra Ext 1965 Mustang |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2003
Location: North Central FL
Posts: 126
|
Installed plugs and changed oil in the GMC. It was the first cartridge type filter I've messed with.....mess.
Also put a new rear veiw mirror in the Chevy and rerouted some wires...still not tidy but better.
__________________
70 C/10 LWB 69 Cougar 68 Mustang 68 GMC 4X4 SWB |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2005
Location: Spring Branch Texas
Posts: 177
|
I got my cab back on the frame Saturday only to find out one of my exhaust manifolds wouldn’t clear. Then when I was blowing out the cab around the windshield, I saw dirt and rust fly out the other side. I thought it was ok because there wasn’t any signs of rust around it. Then I pulled the windshield and found a 6 inch rust hole that I had to patch. That killed half a day to fix…
|
![]() |
![]() |
![]() |
#4 |
10/30/19
Join Date: Aug 2004
Location: ottawa kansas
Posts: 5,215
|
Me 2 guys I know and youngest son tore down the 70 c-10 in about 3 hours.I'm in the gray shirt.
|
![]() |
![]() |
![]() |
#5 |
Account Suspended
Join Date: Oct 2004
Posts: 1,276
|
Don't you love those driveway tear downs, and all the neighbors drive by and look at ya like NOW WHAT ARE THEY DOING!!!!???????
![]() As far as the can oil filters go, I love the way no matter what you seem to do you are turning the bolt and can to get it off and suddenly there is a waterfall of oil that has only one place to go and that is down your arm all the way to your elbow!!!!!! ![]() At any rate, I continued on cutting out rusted metal and patching with good steel. The guy at the motor machine shop said my 383 is close to done.............he is way ahead of me, the truck being ready and my pocket book!!!! Anyway there is progress being made!!! ![]() |
![]() |
![]() |
![]() |
#6 | |
10/30/19
Join Date: Aug 2004
Location: ottawa kansas
Posts: 5,215
|
Quote:
|
|
![]() |
![]() |
![]() |
#7 |
Account Suspended
Join Date: Oct 2004
Posts: 1,276
|
I live in the country so I don't have too many rubberneckers, except the ONE GUY who lives down the road, I am next to last on road and he is last. He grumbled about a guy across the way who parked a bread truck on his property and said it pissed him off every time he drove by.
Since that conversation I have the following that I adopted: 57 Willys wagon 58 Willys truck 58 Willys parts truck 52 GMC COE 72 Jeep truck 13 foot Camper front clip from a 68 chev truck 69 chev truck for the 68 clip Godzilla Humungus built for overkill wood splitter 24 chickens, 4 roosters 2 dogs, one Skipper Key I am not sure if the Skipper Key is a dog or ??? 48 Jeep pickup box Many extra parts, doors hoods fenders engines frames winches lights transmissions wheels and tires sandblast booth wood piles etc. etc. etc. etc. The guy doesn't even look to the side as he drives past now!!!!! ![]() |
![]() |
![]() |
![]() |
#8 |
Account Suspended
Join Date: Oct 2004
Posts: 1,276
|
Almost forgot to mention:
The other guy across from me sold the bread truck!!!!!! ![]() ![]() |
![]() |
![]() |
![]() |
#9 |
10/30/19
Join Date: Aug 2004
Location: ottawa kansas
Posts: 5,215
|
More pics
Last edited by kingsolver72; 09-25-2005 at 08:47 PM. |
![]() |
![]() |
![]() |
#10 |
Java Mechanic
Join Date: Jun 2005
Location: Martinsburg, WV
Posts: 6,764
|
Saw an airshow ... big fun
Went to a car show ... got a link to an album from the show in the proper area Did some body work ... yes, I use bond... my pig has plastic lipstick for now
__________________
Keith 11 Lincoln MKT -- Momma's wagon ![]() 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 .... |
![]() |
![]() |
![]() |
#11 |
Senior Member
Join Date: Jul 2004
Location: Round Rock, Texas
Posts: 858
|
I installed my headlight buzzer. Who would have thought that I would smile everytime I forget to turn-off my headlights? If you haven't done this, do it. You can buy a buzzer for $10 off of the parts board, and that includes shipping.
__________________
Hook'em |
![]() |
![]() |
![]() |
#12 |
Post Whore
Join Date: Aug 2005
Location: Owensboro KY
Posts: 11,905
|
Yeah We live out in the country but my mom gets mad at us for our parts being every where. As I type there are two frames one stripped and one with only the cab gone sittig in the frontyard. There is also a broken tractor sitting next to the shop and a 71 chevy cab hanging in the large tree out front. Dad is just glad that this is "my" project so mom isn't on his back about it.
|
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Jun 2005
Location: Sacramento CA
Posts: 1,255
|
Yard, house and garage work Saturday. Sunday was a swap meet with a bunch of 67-72 GM truck stuff but nothing I needed. Came home and got a friend to help me remove the front clip from the 67 parts truck. He left and I went back at it and have almost everything remove from the cab. I have decided to not use the front clip so everything but the bed will be for sale soon. Pictures to come during this next week. I am an easy seller and don't so this for a living. All I want to do is get a few dollars to buy a few things for my 70 C/10.
__________________
Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck. |
![]() |
![]() |
![]() |
#14 |
4 eyed fever
Join Date: Jul 2005
Location: Eureka, Nevada
Posts: 500
|
Got the 4wd fixed on my truck. The pivot pin/bolt that attaches to the back of the tranny broke off flush. I was all set to drop the trans/transfer case out, but decided to try and reach it thru the hump. Took the seat,carpet, pad and hump out, and welded a nut to the broken stud. It screwed right out. I just got back in from the parking lot at work putting the new one in and bolting the hump down(I love being able to do stuff on night shift). The whole thing was a PIA, but I figure it was alot easier than dropping the trans etc to get to it. Now I can test out my tires and see how she climbs!! Deer season is just around the corner....
__________________
1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!! |
![]() |
![]() |
![]() |
#15 |
C10 Club Tennessee
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,281
|
Installed the new turn signal switch, which got my brakelights fixed.
Installed the new stoplight switch. That seems like nothing, but those 2000 buckets sit so close to the dash that a big guy(like me) can barely get in there. Got my amp working and now my stereo kicks !!!
__________________
Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 |
![]() |
![]() |
![]() |
#16 |
Premium Level Member
Join Date: Aug 2004
Location: Northern CA
Posts: 829
|
Tried to get my hood aligned....tried, put my new grill on the 69 and got bumper remounted.
Went to harbor frieght, bought welding helmet, to paint guns, and a cart that I can push around my garage and drive way. Holds all my stuff when i'm working or not working.
__________________
69 K5 CST stock- 350, 4speed ![]() 77 K5 - 383, auto, 6" lift, D60 front, 14b rear, 39" tsl's, |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,254
|
I bought a 69-70 hood from da-burb a few years ago and a fender off the parts board before that from somebody else.
This weekend I finally got around to making them both the right color for me. Now to TRY to get them on the truck without scratching the heck out of them.
__________________
'70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN |
![]() |
![]() |
![]() |
#18 |
Questionable
Join Date: Mar 2005
Location: Atlanta
Posts: 13,376
|
I got stuck! I got my mounts lined up and drilled em, but couldn't get the LS1 to fit.
![]() ![]()
__________________
If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. |
![]() |
![]() |
![]() |
#19 |
Java Mechanic
Join Date: Jun 2005
Location: Martinsburg, WV
Posts: 6,764
|
Looks like you either need to become the "notch-king" or find some creative bracket solutions to relocate a couple accesories.
__________________
Keith 11 Lincoln MKT -- Momma's wagon ![]() 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 .... |
![]() |
![]() |
![]() |
#20 |
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,738
|
Dad and I finally got the '67 Panel truck running under it's own power
![]() |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Apr 2005
Location: Northwest Ohio
Posts: 162
|
Had to take a break from working on the '67 to repair the brakes on the son's '88 Chevy 1/2 ton. New pads, calipers and front brake hoses...$100. lighter also.
__________________
'12 Silverado Crew Cab 4x4 '05 Silverado SWB '67 Chevrolet CST 2wd '49 Willys Jeepster |
![]() |
![]() |
![]() |
#22 |
Registered User
![]() Join Date: Sep 2003
Location: Arizona
Posts: 305
|
I installed the quadrajet and took the truck to the local saturday night cruise.
![]() ![]() |
![]() |
![]() |
![]() |
#23 |
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,857
|
I finally got my new retractable seat belts in. Also changed the oil in my dads truck.
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads Last edited by 70c10; 09-26-2005 at 04:27 PM. |
![]() |
![]() |
![]() |
#24 |
*************
![]() Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,846
|
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 |
![]() |
![]() |
![]() |
Bookmarks |
|
|