![]() |
|
![]() |
#1 |
Registered User
Join Date: Feb 2008
Location: hamilton, ga
Posts: 48
|
cleaning rusty parts
I just scored a complete ps setup for my truck & was wondering the best way to clean the parts before installing them? The crank pulleys are the worst & i dont have a bead blaster or anything like that. i was thinking about using a metal brush attachment for a drill? any ideas or tips. Thanks
|
![]() |
![]() |
![]() |
#2 |
Chevy One
Join Date: Nov 2006
Location: The BeeHive State
Posts: 132
|
Re: cleaning rusty parts
A wire cup brush works well with a 4 inch grinder. Harbor freight has them for a fair price. Be careful it can bite and give road rash.
__________________
Chevy One ![]() 67 1/2 Two-on-the-Floor 67 Nova 2Dr Sedan 03 Monte Carlo I'M NOT OLD, JUST A CLASSIC!!! |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2007
Location: Hendersonville, Tennessee
Posts: 33
|
Re: cleaning rusty parts
i'm not sure of the exact procedure but saturday on trucks on Spike they showed a way using water and baking soda mixed together and connecting a battery charger to the piece and the other to a piece of steel in the water. if you can find the episode the whole process worked really well for the piece they cleaned.
|
![]() |
![]() |
![]() |
#4 |
Dave's not here, man
Join Date: Jun 2004
Location: Winder, Georgia
Posts: 2,000
|
Re: cleaning rusty parts
I used a wire wheel attachment on my 4.5" grinder. I got it at a local parts house and it works great. Sure does suck when the brush wires come lose and stick into your skin, though.
__________________
- 2014 VW Jetta - 2015 VW Jetta - 1966 Ford F-250 |
![]() |
![]() |
![]() |
#5 |
the boat guy
Join Date: Jul 2007
Location: springfield mo
Posts: 2,339
|
Re: cleaning rusty parts
i like the twisted wire wheels + 4" grinder, im sure theirs a ton of safety equipment im forgetting. nothing like digging wires out of your clothes and any exposed flesh. if youre bored you can rig up a reverse electrolisis bucket.
__________________
67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck 66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate. 28, model a rpu project, |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jan 2006
Location: Houston
Posts: 434
|
Re: cleaning rusty parts
If you're not going to blast it, I'd just lightly sand it getting the high spots out, use some cleaner to remove the oils and grease and paint it with some 7777 semigloss black Rustoleum.
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Dec 2006
Location: Rolla, MO
Posts: 2,463
|
Re: cleaning rusty parts
I got some chemical rust remover from Autozone that worked great. I don't remember the name of it but it was in a small silver jug. You just soak your part in it and the rust desolves. I cleaned several parts with it. You can also dip your clean part into it to prevent flash rust.
__________________
-Scott- |
![]() |
![]() |
![]() |
Bookmarks |
|
|