|
03-20-2011, 04:31 PM | #1 |
Registered User
Join Date: Aug 2009
Location: Red Wing Mn
Posts: 526
|
Help !!!! Head bolts
Im finally getting around to putting my heads back on my 307. I purchased new bolts and gaskets, But i can not remember where to two medium length bolts go.
If some one could help me out, That would be great, thanks. I have everything ready just not sure where those two go. |
03-20-2011, 04:52 PM | #2 |
Registered User
Join Date: Oct 2009
Location: Tampa Bay
Posts: 1,549
|
Re: Help !!!! Head bolts
KC, it's number 14 and 17 in the pic below.
__________________
CHEVY/GMC VIN DECODERS |
03-20-2011, 05:08 PM | #3 |
Registered User
Join Date: Aug 2009
Location: Red Wing Mn
Posts: 526
|
Re: Help !!!! Head bolts
ok, thanks it was obvious when i took a look at it. First time doing this thanks.
So the full torque is 65 ? or 70 ? |
03-20-2011, 05:34 PM | #4 |
Registered User
Join Date: Oct 2009
Location: Tampa Bay
Posts: 1,549
|
Re: Help !!!! Head bolts
yes My book says between 60 and 70. So anywhere in there is good. Just so there all the same. I like doin mine at 70.
Go around in that sequence once at 35 or so and then go around again a second time at final torque. And then go around again for the third time also at final torque and your done.
__________________
CHEVY/GMC VIN DECODERS |
Bookmarks |
|
|