OR Parting 1972 C20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DLTruck1973 · 02-05-2015, 07:37 PM

We are now parting this 1972 C20. Please ask about any parts not listed as we may have them in our inventory from past parted trucks.

Thank you for looking.

Power Brake Booster with brackets...$75.00
Proportioning valve with short lines...$30.00
Steering column for 4 speed...$75.00
small block 4speed clutch linkage complete from pedal to throw out fork...$65.00
Right outer door handle, real nice for a driver...$30.00
Cut from inner roof panel with "no spin" decal...$10.00

Anything else, just ask.

Plus shipping on all parts.

Thank you,
Thomas

No8Easy2 · 02-05-2015, 07:40 PM

would you ship that inner grill? and price on door panels

thanks
Chris

DLTruck1973 · 02-05-2015, 08:54 PM

Quote:

Originally Posted by No8Easy2

would you ship that inner grill? and price on door panels

thanks
Chris

The inner grill is busted up pretty bad on this truck but I may have another one. I will also check the condition on the door panels. I think they have some extra screw holes. Again, I may have another set. Are you looking for black or does color matter?

I will get back with you soon,
Thomas

**cericd** · 02-05-2015, 07:51 PM

Condition and price on the entire cigar lighter. Is it lighted? Any better pictures?

DLTruck1973 · 02-05-2015, 11:16 PM

Quote:

Originally Posted by cericd

Condition and price on the entire cigar lighter. Is it lighted? Any better pictures?

I have nice non-lighted cigar lighters for $15.00 each plus shipping. I can post a photo of one tomorrow.

I did have a lighted one but it is MIA at the current time. If I run across it, I will post it up.

Thank you,
Thomas

**cericd** · 02-06-2015, 01:52 PM

Quote:

Originally Posted by DLTruck1973

I have nice non-lighted cigar lighters for $15.00 each plus shipping. I can post a photo of one tomorrow.

I did have a lighted one but it is MIA at the current time. If I run across it, I will post it up.

Thank you,
Thomas

Thanks. I currently have a lighter but would be interested if you find the lighted one. Also, if you have a nice unscratched lighter bezel for a 68-72, let me know.

DLTruck1973 · 02-06-2015, 04:55 PM

Quote:

Originally Posted by cericd

Thanks. I currently have a lighter but would be interested if you find the lighted one. Also, if you have a nice unscratched lighter bezel for a 68-72, let me know.

I will let you know if the lighted one appears. Here is the best lighter/bezel I have at this time. I would rather not separate the set. Let me know.

Thank you,
Thomas

**cericd** · 02-06-2015, 05:00 PM

Quote:

Originally Posted by DLTruck1973

I will let you know if the lighted one appears. Here is the best lighter/bezel I have at this time. I would rather not separate the set. Let me know.

Thank you,
Thomas

Looks good. How much to ship to 77018?

kda2000 · 02-05-2015, 08:06 PM

I'll take the SB 4-speed clutch linkage - pedal to the Fork (with bracket and bolts to the engine block?) -- Shipping to 78737 - thanks, Ken

DLTruck1973 · 02-05-2015, 09:02 PM

Quote:

Originally Posted by kda2000

I'll take the SB 4-speed clutch linkage - pedal to the Fork (with bracket and bolts to the engine block?) -- Shipping to 78737 - thanks, Ken

Hi Ken,

Let me get it pulled and get you a shipping quote.

Be back with you soon,
Thomas

DLTruck1973 · 02-06-2015, 02:16 PM

Quote:

Originally Posted by kda2000

I'll take the SB 4-speed clutch linkage - pedal to the Fork (with bracket and bolts to the engine block?) -- Shipping to 78737 - thanks, Ken

Hi Ken,

Shipping on the clutch linkage parts will be $17.90 plus the $65.00 for the parts and a total of $82.90

Let me know and I will get you payment information.

Thank you,
Thomas

Tdrcreyn4 · 02-05-2015, 08:10 PM

I'll take the proportioning valve with lines

DLTruck1973 · 02-05-2015, 09:04 PM

Quote:

Originally Posted by Tdrcreyn4

I'll take the proportioning valve with lines

It is yours, thank you sir.

Thomas

danny69 · 02-05-2015, 08:14 PM

What about the heater controls

DLTruck1973 · 02-05-2015, 09:03 PM

Quote:

Originally Posted by danny69

What about the heater controls

They are nice and good levers. $45.00 plus shipping.

Let me know,
Thomas

67chevy4x4c · 02-05-2015, 08:34 PM

How much for 20 inches of the firewall floorboard

DLTruck1973 · 02-05-2015, 09:06 PM

Quote:

Originally Posted by 67chevy4x4c

How much for 20 inches of the firewall floorboard

Not sure exactly what you are asking for. Are you looking for the piece of the lower firewall than is on a 45 degree angle right before the floor starts?

If you can post a photo of it, that would help. I am sure I can help you. Let me know.

Thank you,
Thomas

67chevy4x4c · 02-05-2015, 09:48 PM

Yes the part that is right befor the floor starts where the dimer switch bolts in the floor

DLTruck1973 · 02-05-2015, 11:14 PM

Quote:

Originally Posted by 67chevy4x4c

Yes the part that is right befor the floor starts where the dimer switch bolts in the floor

Ok, so that area 20 inches over from the kick panel to the right?

I will have to look it over well tomorrow and let you know.

Thank you,
Thomas

No8Easy2 · 02-05-2015, 09:55 PM

sounds good Thomas about the grill and as for the panels was hoping for black but if you have a set in good condition i can dye them
shipping is 70506

*low&slow* · 02-05-2015, 10:12 PM

What's the condition of the wheel tubs in the bed? Any pics?

DLTruck1973 · 02-05-2015, 11:11 PM

Quote:

Originally Posted by low&slow

What's the condition of the wheel tubs in the bed? Any pics?

I can check them tomorrow and let you know. I will post photos. We may have other ones available as well.

Thank you,
Thomas

DLTruck1973 · 02-06-2015, 03:10 PM

Quote:

Originally Posted by low&slow

What's the condition of the wheel tubs in the bed? Any pics?

The wheel tubs in this bed are beat up pretty bad. It was used as a truck for sure. Give me some time and I will see if I can find a better set for you.

Thank you for the interest,
Thomas

DLTruck1973 · 02-06-2015, 02:49 PM

Quote:

Originally Posted by No8Easy2

sounds good Thomas about the grill and as for the panels was hoping for black but if you have a set in good condition i can dye them
shipping is 70506

Here are some photos of the door panels. They are factory black panels. They are in very good condition. They would need to be detailed to look really nice. No scars on the grain with the exception of one small area on the drivers side near the arm rest.

I am asking $150.00 for the pair of these panels. I also have a very nice set of dark olive deluxe panels for $150.00 pr. I have again another set of dk olive deluxe panels not as nice for $125.00.

All plus shipping.

Let me know and I will get you as shipping quote,

Thank you for the interest,
Thomas

itstheDRE4M · 02-07-2015, 09:36 PM

I'm looking for a 72 center drag link, hope you have one!

02-05-2015, 07:37 PM	#1
DLTruck1973 Registered User Join Date: Jan 2015 Location: Junction City OR Posts: 1,758	Parting 1972 C20 We are now parting this 1972 C20. Please ask about any parts not listed as we may have them in our inventory from past parted trucks. Thank you for looking. Power Brake Booster with brackets...$75.00 Proportioning valve with short lines...$30.00 Steering column for 4 speed...$75.00 small block 4speed clutch linkage complete from pedal to throw out fork...$65.00 Right outer door handle, real nice for a driver...$30.00 Cut from inner roof panel with "no spin" decal...$10.00 Anything else, just ask. Plus shipping on all parts. Thank you, Thomas Attached Images Last edited by DLTruck1973; 02-10-2015 at 02:32 AM.

02-05-2015, 07:40 PM	#2
No8Easy2 Registered User Join Date: Apr 2014 Location: Lafayette, LA. Posts: 105	Re: Parting 1972 C20 would you ship that inner grill? and price on door panels thanks Chris __________________ "They Don't write songs about Hondas " 1972 C10 "Ole Red--blood, sweet & beers" USMC 1989-1997 1st Anglico

02-05-2015, 07:51 PM	#4
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,161	Re: Parting 1972 C20 Condition and price on the entire cigar lighter. Is it lighted? Any better pictures? __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

02-05-2015, 08:06 PM	#9
kda2000 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 170	Re: Parting 1972 C20 I'll take the SB 4-speed clutch linkage - pedal to the Fork (with bracket and bolts to the engine block?) -- Shipping to 78737 - thanks, Ken

02-05-2015, 08:10 PM	#12
Tdrcreyn4 Registered User Join Date: Aug 2013 Location: Atlanta, GA Posts: 702	Re: Parting 1972 C20 I'll take the proportioning valve with lines

02-05-2015, 08:14 PM	#14
danny69 Registered User Join Date: Nov 2014 Location: Shawnee, OK Posts: 155	Re: Parting 1972 C20 What about the heater controls

02-05-2015, 08:34 PM	#16
67chevy4x4c Registered User Join Date: Jan 2012 Location: bartley w va Posts: 191	Re: Parting 1972 C20 How much for 20 inches of the firewall floorboard

02-05-2015, 09:48 PM	#18
67chevy4x4c Registered User Join Date: Jan 2012 Location: bartley w va Posts: 191	Re: Parting 1972 C20 Yes the part that is right befor the floor starts where the dimer switch bolts in the floor

02-05-2015, 09:55 PM	#20
No8Easy2 Registered User Join Date: Apr 2014 Location: Lafayette, LA. Posts: 105	Re: Parting 1972 C20 sounds good Thomas about the grill and as for the panels was hoping for black but if you have a set in good condition i can dye them shipping is 70506 __________________ "They Don't write songs about Hondas " 1972 C10 "Ole Red--blood, sweet & beers" USMC 1989-1997 1st Anglico

02-05-2015, 10:12 PM	#21
low&slow Account Suspended Join Date: Jan 2009 Location: Kuna, Idaho Posts: 1,046	Re: Parting 1972 C20 What's the condition of the wheel tubs in the bed? Any pics?

02-07-2015, 09:36 PM	#25
itstheDRE4M Registered User Join Date: Feb 2014 Location: Alabama Posts: 42	Re: Parting 1972 C20 I'm looking for a 72 center drag link, hope you have one!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.