'72 Jimmy- estimated value advice - The 1947 - Present Chevrolet & GMC Truck Message Board Network

J.Lance · 03-01-2005, 06:18 PM

Need some additional opinions on this one. I feel it's a pretty good value but would like to here some nationwide comments. I won't reveal the asking price right now as to not tilt anyone high or low.

SPECS:

'72 GMC Jimmy 4wd, auto, a/c, 3.73 gears, cheyenne package

It hasn't been screwed with much at all except a recent paint job and cut for full din stereo. Very original and complete. Seats and center counsel are in good to excellent condition for the age with original upholstery. Body is very straight. Floor pans and rocker boxes are solid. Motor still has all original accesories intact including heat riser tube, spark plug shields, etc... Newer dual exhaust. Runs and drive well. Steering a little loose as usual. Single wall top is in very good shape. That's the good.

The not so good....dash cut for stereo, amateur rust repair of the rockers and right behind the doors on the quater. Looks like the rust wasn't serious but patches don't look like they'll hold over the long run from the back side. Will need to be redone. Door bottoms also had some rust that wasn't repaired well and the passenger door bottom seem is actually split where the door skin meets the inner door bottom. Driver kickpanel needs a patch. The rear hatch is cracked on the sides and will need repaired soon to prevent becoming unusable.

All in all it looks very presentable as you can see. Looks great from 20'. For my purposes, I would look to drive it as is with maybe just a few maintenance items while I work on my other two projects or possibly pass it on to someone else from the board or ebay and maybe make a buck? (leaning towards keeping it, hard to find a decent optioned Jimmy that is not an offensive color!)

So, fire away. Please tell me what you think a value on this one might be. If I do turn it, will probably not make much on what he said his bottom dollar is but we'll see.

J.Lance · 03-01-2005, 06:25 PM

more pics

J.Lance · 03-01-2005, 06:34 PM

couple more

redz 1970 K5 · 03-01-2005, 06:37 PM

IMO Based on how tight it feels and how well it runs, I would say $6-$7k.

J.Lance · 03-01-2005, 06:45 PM

I get the impression it is pretty low miles. Owner can't say for sure but based on the brake/gas pedals, seat upholstery, dash pad, center counsel, motor has never been touched, etc...seems it should be fairly low.

**Daubs** · 03-01-2005, 06:47 PM

I'll say a little less...in the $5-6k range (Okay, really have no idea on Blazers...can I bid $1?)

J.Lance · 03-01-2005, 06:54 PM

Let's keep in mind that to be real nice, will eventually need some amateur bodywork redone and probably another paint job. Probably toss in some new carpet, side panels, detail the engine, the list goes on.

Forgot to mention the rear end was recently rebuilt. (might put a dent in my low mileage theory!?)

bouncytruck · 03-01-2005, 06:54 PM

Looks like it is in pretty good shape. Nice and original. I'd guess in the $6-7K range also. Minimum of $5K if the rust is worse than the pictures show.

Did it originally have the lower body trim? If it were a Blazer of that level, it most likely would - I'm not sure about Jimmy's though.

J.Lance · 03-01-2005, 06:56 PM

Quote:

Originally Posted by bouncytruck

Looks like it is in pretty good shape. Nice and original. I'd guess in the $6-7K range also. Minimum of $5K if the rust is worse than the pictures show.

Did it originally have the lower body trim? If it were a Blazer of that level, it most likely would - I'm not sure about Jimmy's though.

I would have thought so too. The owner said it did not before the paint so not sure. I know I'd probably add it. My guess is it must have since it has the tailgate band.

cheyenne10 · 03-01-2005, 07:06 PM

I would have replied with quite a bit less than others so far. It does need lower trim.Very decent start on driver or resto. but in my opinion all that adds up fast. Seat covers redone sometime. They need scroll to be original. Not cutting it down, would love to have it for right price like everyone else!! Take trades for some 68 sheet metal?

J.Lance · 03-01-2005, 07:34 PM

Quote:

Originally Posted by cheyenne10

I would have replied with quite a bit less than others so far. It does need lower trim.Very decent start on driver or resto. but in my opinion all that adds up fast. Seat covers redone sometime. They need scroll to be original. Not cutting it down, would love to have it for right price like everyone else!! Take trades for some 68 sheet metal?

You're thinking like I am. Probably why I'm a little hesitant and looking for opinions. I actually found everything to complete my '68 close by a couple of weeks ago! Check this thread for details.

http://67-72chevytrucks.com/vboard/s....php3?t=141787

LUV2XCLR8 · 03-01-2005, 07:07 PM

I'm Going To Say 6.5k Max, The Driver's Door Is Coming Apart At The
Bottom In Pic #7, Has Door Speakers In It, Dash Is Cut For Din Radio
And I Also Have A Few Questions, Have You Used A Magnet On This
Thing, Does It Have Tilt, Does The A/c Work, I Like That It's A Gmc,
Gives It A Lil Extra, Still Wondering What Lies Where We Can't See.

Scrubby · 03-01-2005, 07:16 PM

Hard to tell from the picture how much that floor is rusted. Mine looked like that with the carpet in it. When I got into it, it needed a lot more work.

I'm thinking the $3K - $4K range.

J.Lance · 03-01-2005, 07:27 PM

I didn't take a magnet to it yet but I did crawl underneath and felt way up on the quarters. No dents. He said it was incredibly straight when he got it before the paint and I believe him. He didn't do the body or paint work. He actually traded it to a guy and then bought it back from him after the paint was done.

I pulled up the carpet some in the rear and did notice some slight surface rust around the wheel wells but should clean up easy. Floor looked very nice with shiney original blue paint other wise. The pic of the driver kick panel makes the floor look bad there but it is solid. Most of what is in the pic is residue from the kick panel.

The doors do need some work. The more I think about it, looks like they sandblasted the rust but didn't fill or add any metal after that. Mainly that pic of the kickpanel with the door corner in the background looks just like rust that has been blasted away.

*Gee_Emm* · 03-01-2005, 07:30 PM

Welcome to the Price is right I bid $4500 Bob

Blazer1970 · 03-01-2005, 07:34 PM

I was thinking 4 - 5K also. With a little patience, you could easily find one a lot nicer for 6K.

J.Lance · 03-01-2005, 07:50 PM

O.K., enough playing around I guess. I'll give my opinion. I feel right now it could be worth about $4500 (only for someone who wants it just to look decent and doesn't care to fix it up anymore than that). With a little cleaning, new carpet, everything checked out well, maybe $5 to $5500. Of course if I want to do some new patch panels and a $3K paint job, might get into the $9K range (that won't happen unless I plan on keeping it for the long run

The guy is asking $4K and said he'd take $3600. That is probably right at what I'd want to give for it Even though it might be worth a little more. I want it but I don't need it. Would rather drive that around town than my 454 Suburaban though. Not a gas thing so much as a cool thing. I'll give it a day and see what some more people think before I decide for sure. Have to convince the wife too! Thanks!

JBstor · 03-01-2005, 08:25 PM

I would say that if you can get it for $3500, go for it. Something tells me $3250 cash on the barrel, and the other $250 in your back pocket would work. If it doesn't, pull out the other $250

It is hard to go wrong at that price when the body is at least half decent, and it has some desirables, (air, original engine etc.)

JB

bouncytruck · 03-01-2005, 08:41 PM

I didn't notice the door issue before. Having seen that, I'd guess there is a lot of hidden rust.

LUV2XCLR8 · 03-01-2005, 08:48 PM

Quote:

Originally Posted by bouncytruck

I didn't notice the door issue before. Having seen that, I'd guess there is a lot of hidden rust.

YUP I SAID 6.5 MAX, I ORGIANALLY THOUGHT 5K MAX, BUT I DIDN'T WANT
TO SOUND TO HARSH, I WOULD SAY IT IS DEFINATELY WORTH ASKING $.

J.Lance · 03-01-2005, 11:00 PM

Quote:

Originally Posted by bouncytruck

I didn't notice the door issue before. Having seen that, I'd guess there is a lot of hidden rust.

I wouldn't say the rust is necessarily hidden if you know where to look. This is exactly the type of Blazer someone would stick on ebay as rust free in excellent condition and watch the bidding go up to $8k, hoping someone has it shipped to em! This is why I have yet to buy a vehicle without seeing it in person first. However, I feel the price is probably in line with the condtion. Would love to have it for less of course! He supposedly already has an offer from a coworker for $3600 so he will not go less than that. I always find that funny. I for one would sell it to a friend or coworker for my rock bottom price before offering to a stranger!? Can't complain, I've used it. My variation would be "I told a buddy he could have it for $3200 if I couldn't get $3600 elsewhere" Makes more sense. Maybe I should suggest that to him for future transactions!

71jimmy · 03-02-2005, 12:42 AM

I would say $3k to $3500 is probably a good price, it sounds like you know where to look for the rust. However, some of that can't be seen until you take things apart, don't care how carefull you look. That's what you would pay in N. Cal for a similar rig.

Good luck, could be a great DD.

Alexis · 03-02-2005, 12:47 AM

I agree with Jimmy on this, it would be hard for me to drop 4g's for that.

but ya know what they say........

Something worth just as much as someone is willing to pay for it. Good luck.

vtblazer · 03-02-2005, 08:03 AM

Have you bought it yet?
In the end, the price came down to 'reasonable' for a daily driver.
Have you seen the torsion boxes up close? Windshield frame?
If you were to take it to a body shop, I bet you'd get better than 2K tied up in rust repair easily. That's before paint.
Great start though, looks complete enough to be a nice truck.
So, did you buy it yet?

Huck · 03-02-2005, 09:07 AM

Jason, the one I bought last year out of Michigan, had similar repairs---front of rear quarters, a floor panel---period. Paid $4,400. and it was all done real decent.
Look at blazers real careful as swaping big stuff is tough. Front clip, doors, are no brainers as it's all available new or from trucks. The tub, firewall and windshield frame are the critical things that are hard to find and expensive to get/install.
Given the pictures, my bet as to additional rust unseen, and a slight deduction for GMC ===____.$3600. would be my top $$ if I needed it for a driver. For resale, it will take more work/parts then you project as they ALWAYS do. The hatch will be a tough fix where it's opening. If you're expecting better gas mileage--not sure that will happen either as the 350-350 with 373's will probably give you around 10 mpg in town.
Of course, buying it and storing it somewhere will give you a better return on your $$ then the bank would so you can always use that approach on the love muffin! hehehe Good luck---Huck

03-01-2005, 06:18 PM	#1
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	'72 Jimmy- estimated value advice Need some additional opinions on this one. I feel it's a pretty good value but would like to here some nationwide comments. I won't reveal the asking price right now as to not tilt anyone high or low. SPECS: '72 GMC Jimmy 4wd, auto, a/c, 3.73 gears, cheyenne package It hasn't been screwed with much at all except a recent paint job and cut for full din stereo. Very original and complete. Seats and center counsel are in good to excellent condition for the age with original upholstery. Body is very straight. Floor pans and rocker boxes are solid. Motor still has all original accesories intact including heat riser tube, spark plug shields, etc... Newer dual exhaust. Runs and drive well. Steering a little loose as usual. Single wall top is in very good shape. That's the good. The not so good....dash cut for stereo, amateur rust repair of the rockers and right behind the doors on the quater. Looks like the rust wasn't serious but patches don't look like they'll hold over the long run from the back side. Will need to be redone. Door bottoms also had some rust that wasn't repaired well and the passenger door bottom seem is actually split where the door skin meets the inner door bottom. Driver kickpanel needs a patch. The rear hatch is cracked on the sides and will need repaired soon to prevent becoming unusable. All in all it looks very presentable as you can see. Looks great from 20'. For my purposes, I would look to drive it as is with maybe just a few maintenance items while I work on my other two projects or possibly pass it on to someone else from the board or ebay and maybe make a buck? (leaning towards keeping it, hard to find a decent optioned Jimmy that is not an offensive color!) So, fire away. Please tell me what you think a value on this one might be. If I do turn it, will probably not make much on what he said his bottom dollar is but we'll see. Attached Images __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

03-01-2005, 06:25 PM	#2
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	more pics Attached Images __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!) Last edited by J.Lance; 03-01-2005 at 06:32 PM.

03-01-2005, 06:34 PM	#3
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	couple more Attached Images __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

03-01-2005, 06:37 PM	#4
redz 1970 K5 OBS guy Join Date: Jun 2004 Location: SoCal Posts: 1,060	IMO Based on how tight it feels and how well it runs, I would say $6-$7k. __________________ 88 Suburban Goodies- Alpine, Auto Meter, BDS, Bilstein, B&M, BFG, Borgeson, Bushwhacker, Cowl hood, Flowmaster, Genuine Gear, Holley, Infinity, JVC, K&N, MB Wheels, MSD, Pioneer, Skyjacker, Sony, Thorley, Walker + more

03-01-2005, 06:45 PM	#5
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	I get the impression it is pretty low miles. Owner can't say for sure but based on the brake/gas pedals, seat upholstery, dash pad, center counsel, motor has never been touched, etc...seems it should be fairly low. __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

03-01-2005, 06:47 PM	#6
Daubs Registered User Join Date: Jan 2005 Location: Eastern Nebraska Posts: 611	I'll say a little less...in the $5-6k range (Okay, really have no idea on Blazers...can I bid $1?) __________________ '72 Chevy K-20 Crate 350, SM465, 4.10's

03-01-2005, 06:54 PM	#7
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	Let's keep in mind that to be real nice, will eventually need some amateur bodywork redone and probably another paint job. Probably toss in some new carpet, side panels, detail the engine, the list goes on. Forgot to mention the rear end was recently rebuilt. (might put a dent in my low mileage theory!?) __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

03-01-2005, 06:54 PM	#8
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Looks like it is in pretty good shape. Nice and original. I'd guess in the $6-7K range also. Minimum of $5K if the rust is worse than the pictures show. Did it originally have the lower body trim? If it were a Blazer of that level, it most likely would - I'm not sure about Jimmy's though. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

03-01-2005, 07:06 PM	#10
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	My Value I would have replied with quite a bit less than others so far. It does need lower trim.Very decent start on driver or resto. but in my opinion all that adds up fast. Seat covers redone sometime. They need scroll to be original. Not cutting it down, would love to have it for right price like everyone else!! Take trades for some 68 sheet metal? __________________ Bob

03-01-2005, 07:07 PM	#12
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,482	I'm Going To Say 6.5k Max, The Driver's Door Is Coming Apart At The Bottom In Pic #7, Has Door Speakers In It, Dash Is Cut For Din Radio And I Also Have A Few Questions, Have You Used A Magnet On This Thing, Does It Have Tilt, Does The A/c Work, I Like That It's A Gmc, Gives It A Lil Extra, Still Wondering What Lies Where We Can't See. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-01-2005, 07:16 PM	#13
Scrubby Check out GMTrucks.org Join Date: Sep 2003 Location: Boise, Id Posts: 284	Hard to tell from the picture how much that floor is rusted. Mine looked like that with the carpet in it. When I got into it, it needed a lot more work. I'm thinking the $3K - $4K range.

03-01-2005, 07:27 PM	#14
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	I didn't take a magnet to it yet but I did crawl underneath and felt way up on the quarters. No dents. He said it was incredibly straight when he got it before the paint and I believe him. He didn't do the body or paint work. He actually traded it to a guy and then bought it back from him after the paint was done. I pulled up the carpet some in the rear and did notice some slight surface rust around the wheel wells but should clean up easy. Floor looked very nice with shiney original blue paint other wise. The pic of the driver kick panel makes the floor look bad there but it is solid. Most of what is in the pic is residue from the kick panel. The doors do need some work. The more I think about it, looks like they sandblasted the rust but didn't fill or add any metal after that. Mainly that pic of the kickpanel with the door corner in the background looks just like rust that has been blasted away. __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

03-01-2005, 07:30 PM	#15
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Welcome to the Price is right I bid $4500 Bob

03-01-2005, 07:34 PM	#16
Blazer1970 Registered User Join Date: Dec 1999 Location: Old Mission, MI, USA Posts: 2,510	I was thinking 4 - 5K also. With a little patience, you could easily find one a lot nicer for 6K. __________________ Tim

03-01-2005, 07:50 PM	#17
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	O.K., enough playing around I guess. I'll give my opinion. I feel right now it could be worth about $4500 (only for someone who wants it just to look decent and doesn't care to fix it up anymore than that). With a little cleaning, new carpet, everything checked out well, maybe $5 to $5500. Of course if I want to do some new patch panels and a $3K paint job, might get into the $9K range (that won't happen unless I plan on keeping it for the long run The guy is asking $4K and said he'd take $3600. That is probably right at what I'd want to give for it Even though it might be worth a little more. I want it but I don't need it. Would rather drive that around town than my 454 Suburaban though. Not a gas thing so much as a cool thing. I'll give it a day and see what some more people think before I decide for sure. Have to convince the wife too! Thanks! __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)



Register or Log In To remove these advertisements.

03-01-2005, 08:25 PM	#18
JBstor Registered User Join Date: Feb 2005 Location: Winnipeg, Manitoba, Canada Posts: 66	I would say that if you can get it for $3500, go for it. Something tells me $3250 cash on the barrel, and the other $250 in your back pocket would work. If it doesn't, pull out the other $250 It is hard to go wrong at that price when the body is at least half decent, and it has some desirables, (air, original engine etc.) JB

03-01-2005, 08:41 PM	#19
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	I didn't notice the door issue before. Having seen that, I'd guess there is a lot of hidden rust. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

03-02-2005, 12:42 AM	#22
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,084	I would say $3k to $3500 is probably a good price, it sounds like you know where to look for the rust. However, some of that can't be seen until you take things apart, don't care how carefull you look. That's what you would pay in N. Cal for a similar rig. Good luck, could be a great DD. __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

03-02-2005, 12:47 AM	#23
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	I agree with Jimmy on this, it would be hard for me to drop 4g's for that. but ya know what they say........ Something worth just as much as someone is willing to pay for it. Good luck.

03-02-2005, 08:03 AM	#24
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Blazer Have you bought it yet? In the end, the price came down to 'reasonable' for a daily driver. Have you seen the torsion boxes up close? Windshield frame? If you were to take it to a body shop, I bet you'd get better than 2K tied up in rust repair easily. That's before paint. Great start though, looks complete enough to be a nice truck. So, did you buy it yet?

03-02-2005, 09:07 AM	#25
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Jason, the one I bought last year out of Michigan, had similar repairs---front of rear quarters, a floor panel---period. Paid $4,400. and it was all done real decent. Look at blazers real careful as swaping big stuff is tough. Front clip, doors, are no brainers as it's all available new or from trucks. The tub, firewall and windshield frame are the critical things that are hard to find and expensive to get/install. Given the pictures, my bet as to additional rust unseen, and a slight deduction for GMC ===____.$3600. would be my top $$ if I needed it for a driver. For resale, it will take more work/parts then you project as they ALWAYS do. The hatch will be a tough fix where it's opening. If you're expecting better gas mileage--not sure that will happen either as the 350-350 with 373's will probably give you around 10 mpg in town. Of course, buying it and storing it somewhere will give you a better return on your $$ then the bank would so you can always use that approach on the love muffin! hehehe Good luck---Huck

Register or Log In To remove these advertisements.