The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-30-2012, 04:44 PM   #1
gdavis
Registered User
 
gdavis's Avatar
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
1968

I live on the west coast of Florida. I am building a 1968 chev swb steepside. I call her patches. I have already rebuilt the 350 4 bolt. I replaced a old tired in-line 6 banger. I had to go with over size pistons and bored .030 over. I will be using my stock th400 transmission 3 speed. with stock iron heads and a 4 barrel intake. Rear end will also be stock. The frame I will be using a 1967 frame without the helpers springs. I thought they looked out of place. My 68 frame was shot and I bought this 67 for $50.00 what a deal. The cab is a 1969 my 68 had too much cancer around the winshield. So I used all the parts I could and parted in good terms with the 68 cab. By now it being used to make new ones. I replaced the front sup. with sup from a 1972 with 5 lugs and a disk brake system. Also replaced the rear end with the 1972 rear end with a 5 lug system. replaced the last cross member for the brake line in front of the gas tank and behind the gas tank.
Attached Images
     

Last edited by gdavis; 10-27-2014 at 03:03 AM.
gdavis is offline   Reply With Quote
Old 10-01-2012, 03:53 PM   #2
gdavis
Registered User
 
gdavis's Avatar
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
Re: 1968

Here are more pictures of damage and painted items
Attached Images
     
gdavis is offline   Reply With Quote
Old 10-01-2012, 04:03 PM   #3
gdavis
Registered User
 
gdavis's Avatar
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
Re: 1968

Here are more pictures of my build and damages that I have to fix. also the picture of the six cly. I pulled out of the truck.
Attached Images
     

Last edited by gdavis; 03-25-2013 at 05:23 PM.
gdavis is offline   Reply With Quote
Old 10-01-2012, 04:16 PM   #4
gdavis
Registered User
 
gdavis's Avatar
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
Re: 1968

Here is some pictures I took of the full seat I am using. I still have to sand blast the frame still to come
Attached Images
     

Last edited by gdavis; 03-25-2013 at 05:24 PM.
gdavis is offline   Reply With Quote
Old 10-02-2012, 08:37 PM   #5
gdavis
Registered User
 
gdavis's Avatar
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
Re: 1968

Here is a picture of the rear end.
Attached Images
   

Last edited by gdavis; 03-25-2013 at 05:26 PM.
gdavis is offline   Reply With Quote
Old 10-02-2012, 08:43 PM   #6
gdavis
Registered User
 
gdavis's Avatar
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
Re: 1968

Also here is the dash I am pulling out. My donor cab had a good one. So Now I wll be cutting out the foot well or kick panel out mine is all rusty and will not hold the vent doors.
Attached Images
     
gdavis is offline   Reply With Quote
Old 10-02-2012, 08:52 PM   #7
gdavis
Registered User
 
gdavis's Avatar
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
Re: 1968

some more pictures of the dash and other damage. also here is the frame i got it up to where I can work on it. It was built out of 6x6x10 pt and 2x4x4 mounted to frame and two long bolts 5/8x12 in long and it really works. The only thing is that it is in my way to finished my wood project. So I guess I will blast as soon as we get some good weather raining here in Florida
Attached Images
     
gdavis is offline   Reply With Quote
Old 10-02-2012, 08:56 PM   #8
gdavis
Registered User
 
gdavis's Avatar
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
Re: 1968

I am thinking about replacing my door windows with a one piece glass, has anyone done this. just thinking
Attached Images
   
gdavis is offline   Reply With Quote
Old 10-05-2012, 08:27 PM   #9
Xeen
Registered User
 
Xeen's Avatar
 
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
Re: 1968

It looks like a good start, I too have a 1968 Stepside, My frame was also junk but I decided to go ahead and fix it.
Oh man those bright Orange parts are going to pop if someone gets under the truck to look.
I take it you are going to paint the body Hugger Orange? great choice!
I will be watching this one.
__________________
Please call me Brian.
Check out My 1972 SWB Fleetside 5.3L Vortec Restomod Build
Xeen is offline   Reply With Quote
Old 10-06-2012, 08:05 PM   #10
gdavis
Registered User
 
gdavis's Avatar
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
Re: 1968

Hey guy u were almost right Burnt orange metlic and black metlic on bottom
changed my mind it will be kubota orange. Like the farm equipment orange. I really like the color. Solid orange. Wheels and frame on vent windows and grill are going to be orange The inter fenders are black now but they will also be orange. Going to have a crowl induction hood.
Front and rear bumpers are going to be painted orange. No chrome no where.
Even the rear view mirrows are going to be painted orange.

Last edited by gdavis; 06-29-2013 at 04:26 PM.
gdavis is offline   Reply With Quote
Old 10-06-2012, 08:14 PM   #11
gdavis
Registered User
 
gdavis's Avatar
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
1968 swb steep

Well today I sand blasted the cross member and primed and painted it gloss black. I tried to lift the cross member by myself and hurt my back. I can't get it in my head that I am not as young as I used to be. (62) anyway I hope to sand blast the frame this next week.
Attached Images
    
gdavis is offline   Reply With Quote
Old 04-20-2014, 09:57 PM   #12
zbreezen
Registered User
 
zbreezen's Avatar
 
Join Date: Nov 2011
Location: Fort Myers, Fl.
Posts: 31
Re: 1968 swb steep

good to see another floridian. i am in fort myers and have a 68 also. I hear u about the age thing, 56.. no time for projects when younger. Working on a new wiring harness conversion. Updating with 96 relay center, bulkhead and fuse panel. Getting ready for newer electrical goodies.
zbreezen is offline   Reply With Quote
Old 04-20-2014, 10:29 PM   #13
gdavis
Registered User
 
gdavis's Avatar
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
Re: 1968 swb steep

Quote:
Originally Posted by zbreezen View Post
good to see another floridian. i am in fort myers and have a 68 also. I hear u about the age thing, 56.. no time for projects when younger. Working on a new wiring harness conversion. Updating with 96 relay center, bulkhead and fuse panel. Getting ready for newer electrical goodies.
yea thanks you and happy building and good luck with the wiring harness. Did you find a good deal. I sent you a PM
__________________
Check out Patches

Cars I owned in the past.
1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev
1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS

1967 Buick electra 225 1995 Harley Davidson bager

What does not kill you will make you stronger

1968 c10 short wheel base stepper
gdavis is offline   Reply With Quote
Old 10-06-2012, 08:36 PM   #14
Xeen
Registered User
 
Xeen's Avatar
 
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
Re: 1968

Im only 39 myself but I have had my share of Injuries and no matter what age you are it isnt fun.
The crossmember looks good, whats your estimated time to completion on the truck?
__________________
Please call me Brian.
Check out My 1972 SWB Fleetside 5.3L Vortec Restomod Build
Xeen is offline   Reply With Quote
Old 10-07-2012, 08:47 PM   #15
gdavis
Registered User
 
gdavis's Avatar
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
Re: 1968

Today, I did nothing. I rursed a bad back today.
gdavis is offline   Reply With Quote
Old 10-08-2012, 07:22 PM   #16
gdavis
Registered User
 
gdavis's Avatar
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
Re: 1968

well, Today I sand blasted some more spare parts. Glove box, pitman arm and backing plates for rear brakes. My parts came in for my rear end and I will be putting it together tomorrow.
Attached Images
   
gdavis is offline   Reply With Quote
Old 10-09-2012, 08:54 PM   #17
gdavis
Registered User
 
gdavis's Avatar
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
1968 swb steep side

here are a few parts I cleaned up today. I still have to sand blast them. They were coated with grease and asfault about 1 inch of asfault. It took all day to clean them just so I could get them ready for the sand blaster. The grill is a basket case. It will go to the salvage to make new fords.
Attached Images
     

Last edited by gdavis; 07-26-2013 at 08:12 PM.
gdavis is offline   Reply With Quote
Old 10-09-2012, 08:56 PM   #18
gdavis
Registered User
 
gdavis's Avatar
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
Re: 1968 swb steep

and still more pictures of parts I cleaned. the same day
Attached Images
     
gdavis is offline   Reply With Quote
Old 10-10-2012, 12:08 PM   #19
808_67C10
Registered User
 
808_67C10's Avatar
 
Join Date: Sep 2011
Location: Hilo, Hawaii
Posts: 1,051
Re: 1968

Pls post pics of welding in your dash! I am about to do the same thing and would like to see it done before I attack it!!! Thanks and great progress!
Posted via Mobile Device
__________________
Frank (Hilo, Hawaii)
Trucks, Tacos, and Beer go together like Peanut Butter and Ladies!
85 C/10 SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=760383
67 C/10 SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=489298
79 K5 Blazer SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=657461
808_67C10 is offline   Reply With Quote
Old 10-10-2012, 09:55 PM   #20
gdavis
Registered User
 
gdavis's Avatar
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
Re: 1968

Quote:
Originally Posted by 808_67C10 View Post
Pls post pics of welding in your dash! I am about to do the same thing and would like to see it done before I attack it!!! Thanks and great progress!
Posted via Mobile Device
It is easy taking it out. I thought it would be hard. Drill the welds and weld the new one in the old welds and bolt the dash back in. I will post pictures as soon as I do it. I got to fix the kick panels first and the vent doors.
gdavis is offline   Reply With Quote
Old 10-11-2012, 12:00 PM   #21
808_67C10
Registered User
 
808_67C10's Avatar
 
Join Date: Sep 2011
Location: Hilo, Hawaii
Posts: 1,051
Re: 1968

Quote:
Originally Posted by gdavis View Post
It is easy taking it out. I thought it would be hard. Drill the welds and weld the new one in the old welds and bolt the dash back in. I will post pictures as soon as I do it. I got to fix the kick panels first and the vent doors.
Thanks brotha... I got my d-lux dash from someone who just cut it out... Not by the welds so I think mine is gonna be not so easy....
Posted via Mobile Device
__________________
Frank (Hilo, Hawaii)
Trucks, Tacos, and Beer go together like Peanut Butter and Ladies!
85 C/10 SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=760383
67 C/10 SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=489298
79 K5 Blazer SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=657461
808_67C10 is offline   Reply With Quote
Old 10-11-2012, 09:57 PM   #22
Bomp
Registered User
 
Bomp's Avatar
 
Join Date: Apr 2011
Location: .
Posts: 3,104
Re: 1968

Glad I found this project before you got it done. Your really going to town on this. Looks Great!
Watching this one.
Bomp is offline   Reply With Quote
Old 10-12-2012, 05:51 PM   #23
gdavis
Registered User
 
gdavis's Avatar
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
Re: 1968

Quote:
Originally Posted by Bomp View Post
Glad I found this project before you got it done. Your really going to town on this. Looks Great!
Watching this one.
thanks
gdavis is offline   Reply With Quote
Old 10-12-2012, 05:50 PM   #24
gdavis
Registered User
 
gdavis's Avatar
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
Re: 1968

Quote:
Originally Posted by 808_67C10 View Post
Thanks brotha... I got my d-lux dash from someone who just cut it out... Not by the welds so I think mine is gonna be not so easy....
Posted via Mobile Device
did they at least leave the welds for ou to see. If so drill out the welds and yopu will be back on tract.
gdavis is offline   Reply With Quote
Old 10-10-2012, 05:00 PM   #25
longbed67
Registered User
 
longbed67's Avatar
 
Join Date: Jun 2011
Location: Monroe, WI
Posts: 1,415
Re: 1968

Looks like a good start! Whats your final plans for the truck?
__________________
Adam

My 1967 C10 - Turbo 250 Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=485843

(608) 214-8706
longbed67 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:08 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com