73-87 Engine Mounts in 67-72 Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

The Youngen · 11-26-2012, 12:21 PM

So from the suburban that i got the 6.2 out of, i still have the whole frame with the engine mounts, towers and all. I know that i need BBC mounts for a 67-72 for clearance but if i just use the pre-existing stuff from the 82 burb, will it essentially give me the equivalent of sbc or bbc stands?

**LockDoc** · 11-28-2012, 01:01 AM

-
I don't know if you are familiar with the FAQ Forum or not. Scroll down to the bottom of this page and you will see the "Forum Jump" box. Click on the little down arrow on the right side of the box and scroll down to "FAQ Truck Tech". On that page go down to "Thread / Thread Starter: FAQ Index Thread". When you get into that scroll through the different sections and you will find answers to questions you haven't even thought of yet....

The section you want right now is the "Engine and Drivetrain related FAQ's". Scroll down to that and there are two threads on the engine mount subject. They are:

Big Block Motor Mounts on the cheap.
and
How to adapt 73-87 engine mounts to a 67-72 frame

I could have just posted a direct link but there is a lot of good info in the FAQ section and now the people that read this thread will know how to get to it. Thanks to Krue for indexing the FAQ's

You might want to check out the "Projects and builds" forum for some good info too.

LockDoc

SS Tim · 11-28-2012, 01:29 AM

Well done Leon. To me tools are always better than a short answer.

**LockDoc** · 11-28-2012, 10:44 AM

Quote:

Originally Posted by SS Tim

Well done Leon. To me tools are always better than a short answer.

Thanks Tim. I couldn't believe the information posted there when a member turned me onto the FAQ Forum. That was when I was new to the board in 2006.

LockDoc

The Youngen · 11-30-2012, 04:41 PM

I hate to sound whiny but i checked out the faq and could not find the threads you were speaking of

CC69Rat · 11-30-2012, 04:43 PM

I have a BBC and 84 Kmember in mine. do you just need pictures? .. or how can I help you?

The Youngen · 11-30-2012, 04:53 PM

Sorry for my stupidity, it was in the 67-72 faq section. So if i understand this right, you use the 73-87 stands and than small block rubber mounts? And this in theory should give me 67-72 big block clearance? This is all for a 6.2 remember

11-26-2012, 12:21 PM	#1
The Youngen Registered User Join Date: Oct 2010 Location: Westbrook CT Posts: 81	73-87 Engine Mounts in 67-72 Question So from the suburban that i got the 6.2 out of, i still have the whole frame with the engine mounts, towers and all. I know that i need BBC mounts for a 67-72 for clearance but if i just use the pre-existing stuff from the 82 burb, will it essentially give me the equivalent of sbc or bbc stands? __________________ 71 Chevy C10 350/TH350 71 GMC C20 350 (donor truck) 82 Chevy K20 Suburban 6.2/TH400/NP 95 Chevy 4x4 1500 Tahoe 6.5T/4L80E 04 Chevy 4x4 3500 Silverado 6.6T Duramax/Allison 1000 (work truck) 09 Chevy Aveo 1.6L/5 speed manual

11-28-2012, 01:01 AM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,633	Re: 73-87 Engine Mounts in 67-72 Question - I don't know if you are familiar with the FAQ Forum or not. Scroll down to the bottom of this page and you will see the "Forum Jump" box. Click on the little down arrow on the right side of the box and scroll down to "FAQ Truck Tech". On that page go down to "Thread / Thread Starter: FAQ Index Thread". When you get into that scroll through the different sections and you will find answers to questions you haven't even thought of yet.... The section you want right now is the "Engine and Drivetrain related FAQ's". Scroll down to that and there are two threads on the engine mount subject. They are: Big Block Motor Mounts on the cheap. and How to adapt 73-87 engine mounts to a 67-72 frame I could have just posted a direct link but there is a lot of good info in the FAQ section and now the people that read this thread will know how to get to it. Thanks to Krue for indexing the FAQ's You might want to check out the "Projects and builds" forum for some good info too. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

11-28-2012, 01:29 AM	#3
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: 73-87 Engine Mounts in 67-72 Question Well done Leon. To me tools are always better than a short answer. __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

11-30-2012, 04:41 PM	#5
The Youngen Registered User Join Date: Oct 2010 Location: Westbrook CT Posts: 81	Re: 73-87 Engine Mounts in 67-72 Question I hate to sound whiny but i checked out the faq and could not find the threads you were speaking of __________________ 71 Chevy C10 350/TH350 71 GMC C20 350 (donor truck) 82 Chevy K20 Suburban 6.2/TH400/NP 95 Chevy 4x4 1500 Tahoe 6.5T/4L80E 04 Chevy 4x4 3500 Silverado 6.6T Duramax/Allison 1000 (work truck) 09 Chevy Aveo 1.6L/5 speed manual

11-30-2012, 04:43 PM	#6
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: 73-87 Engine Mounts in 67-72 Question I have a BBC and 84 Kmember in mine. do you just need pictures? .. or how can I help you? __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

11-30-2012, 04:53 PM	#7
The Youngen Registered User Join Date: Oct 2010 Location: Westbrook CT Posts: 81	Re: 73-87 Engine Mounts in 67-72 Question Sorry for my stupidity, it was in the 67-72 faq section. So if i understand this right, you use the 73-87 stands and than small block rubber mounts? And this in theory should give me 67-72 big block clearance? This is all for a 6.2 remember __________________ 71 Chevy C10 350/TH350 71 GMC C20 350 (donor truck) 82 Chevy K20 Suburban 6.2/TH400/NP 95 Chevy 4x4 1500 Tahoe 6.5T/4L80E 04 Chevy 4x4 3500 Silverado 6.6T Duramax/Allison 1000 (work truck) 09 Chevy Aveo 1.6L/5 speed manual



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.