Quad. and Edelbrock intake choke - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kaycee · 10-22-2005, 09:40 PM

Is there a special plate I can purchase to hook up my original quadrajet choke to my Edelbrock intake(2101)?I was wanting to hook up my divorce choke but the guy's at my local auto store have no clue.I figured some one here has an answer.Thanks for the help and the new board looks great

see ten · 10-23-2005, 09:18 AM

Both of my intakes came with a plate that bolted to the intake for the choke. The choke from the factory intake should bolt/screw right on to this plate. It seems like I had to flip the rod(turn the part that faced the outside of the truck to the inside, not flip top to bottom) to make it fit. Once you get it where it fits I think the rod has to be bent to adjust the choke. I could be wrong about the adjustment procedure. Both of my trucks have the ebelbrock intake and they both run a factory choke. I also do not run the factory cover that goes over the spring part of the choke.

**pjmoreland** · 10-23-2005, 01:28 PM

You need the Edelbrock choke adapter (part number 8901). Edelbrock also sells a choke rod that will fit correctly (part number 9171). You can order these from www.summitracing.com.

kaycee · 10-23-2005, 08:30 PM

If that is the plate I need then I got it,I can't seem to figure how my choke spring hooks to it.Do you ever have one of those days where the simplest things can just kick your A#%.It's my day

kaycee · 10-23-2005, 08:47 PM

I looked through my catalog and they didn't have it in there(Summit) ,just went through the on line site and found what I need.Thanks for the Help

*chevytruckfan* · 10-23-2005, 09:23 PM

I have a divorced choke on my stock intake and q-jet The rod that I have keeps the choke plate in a straight up verticle position. I have always thought the rod was too long not sure. That part # for that rod from summit should help.

see ten · 10-23-2005, 10:42 PM

Your stock rod will work. Both of my trucks have the stock rod on them and the choke functions on them both.

10-22-2005, 09:40 PM	#1
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,446	Quad. and Edelbrock intake choke Is there a special plate I can purchase to hook up my original quadrajet choke to my Edelbrock intake(2101)?I was wanting to hook up my divorce choke but the guy's at my local auto store have no clue.I figured some one here has an answer.Thanks for the help and the new board looks great __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327 Last edited by kaycee; 10-22-2005 at 09:41 PM.

10-23-2005, 09:18 AM	#2
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: Quad. and Edelbrock intake choke Both of my intakes came with a plate that bolted to the intake for the choke. The choke from the factory intake should bolt/screw right on to this plate. It seems like I had to flip the rod(turn the part that faced the outside of the truck to the inside, not flip top to bottom) to make it fit. Once you get it where it fits I think the rod has to be bent to adjust the choke. I could be wrong about the adjustment procedure. Both of my trucks have the ebelbrock intake and they both run a factory choke. I also do not run the factory cover that goes over the spring part of the choke.

10-23-2005, 01:28 PM	#3
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,770	Re: Quad. and Edelbrock intake choke You need the Edelbrock choke adapter (part number 8901). Edelbrock also sells a choke rod that will fit correctly (part number 9171). You can order these from www.summitracing.com. Attached Images

10-23-2005, 08:30 PM	#4
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,446	Re: Quad. and Edelbrock intake choke If that is the plate I need then I got it,I can't seem to figure how my choke spring hooks to it.Do you ever have one of those days where the simplest things can just kick your A#%.It's my day __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327

10-23-2005, 08:47 PM	#5
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,446	Re: Quad. and Edelbrock intake choke I looked through my catalog and they didn't have it in there(Summit) ,just went through the on line site and found what I need.Thanks for the Help __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327

10-23-2005, 09:23 PM	#6
chevytruckfan Account Suspended Join Date: May 2004 Location: Lake Placid, Florida Posts: 930	Re: Quad. and Edelbrock intake choke I have a divorced choke on my stock intake and q-jet The rod that I have keeps the choke plate in a straight up verticle position. I have always thought the rod was too long not sure. That part # for that rod from summit should help.

10-23-2005, 10:42 PM	#7
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: Quad. and Edelbrock intake choke Your stock rod will work. Both of my trucks have the stock rod on them and the choke functions on them both.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.