67-68 rear ends - The 1947 - Present Chevrolet & GMC Truck Message Board Network

trukindud · 11-24-2009, 01:15 AM

what rear ends came stock in 67-68?

**breeh** · 11-24-2009, 01:17 AM

6 lug 12 bolt

trukindud · 11-24-2009, 01:19 AM

was there any othere options

**breeh** · 11-24-2009, 01:22 AM

I guess I should have asked if it was a 1/2 or 3/4 ton. If a 3/4 ton then it should have an HO52 full floater.

trukindud · 11-24-2009, 01:27 AM

2wd cst c20 i think

**breeh** · 11-24-2009, 01:30 AM

Okay, should be a corporate HO52 then unless changed in the last 40 years. If a leaf spring truck then there is a chance that it could be a Dana 60.

trukindud · 11-24-2009, 01:34 AM

Name: 15950132.bmp
Views: 339
Size: 86.8 KB

this is the one that came out

**breeh** · 11-24-2009, 01:36 AM

If that is an 8 lugger than I would say that is a Dana 60.

trukindud · 11-24-2009, 01:39 AM

6 lug

**breeh** · 11-24-2009, 02:05 AM

Hmmm, 6 lug in a C20? 6 lugs implies 1/2 ton or C10. Should be a 12 bolt or maybe a Dana 44. Need to see the rear cover to ID.

trukindud · 11-24-2009, 02:09 AM

well i know its not a 12 bolt

trukindud · 11-24-2009, 02:11 AM

did chevy ever put a dana 44 in a 67 -68 truck

shaneschevys · 11-24-2009, 02:15 AM

I think they did in some of the leaf spring trucks. Is it a 10 bolt?

trukindud · 11-24-2009, 02:20 AM

its coil

shaneschevys · 11-24-2009, 02:25 AM

I guess they could have put them in coil spring trucks. I have always seen them in leaf spring trucks.

**breeh** · 11-24-2009, 02:25 AM

There were D44 put in these trucks. I personally have not seen one but have seen them pop up on this board several times. It is possible that a 6 lug D60 was swapped in later. On the dana's you can usually find a casting number in the webbing. Look for 44 or 60. If you had a picture of the cover we could at least ID if it is a dana.

trukindud · 11-24-2009, 08:00 PM

[ATTACH]

Name: 12345.jpg
Views: 284
Size: 29.0 KB

[/ATTACH] is this what you were talking about or one of the othere numbers

ERASER5 · 11-24-2009, 08:55 PM

Looks like a Dana 60. My D-60 is 6 lug, but most are 8 lug. An original C20 would have 8 lugs every time.

vectorit · 11-24-2009, 09:41 PM

I've only seen D-44's up front.
(A D-44 is my front axle)

*project 67 sub* · 11-24-2009, 11:39 PM

mine had a 6 lug 10 bolt when i got mine, but not a dana 44. but now it has a 71-72 5 lug 12 bolt, with 76 c10 rear drum brakes on it

**breeh** · 11-25-2009, 12:28 AM

Definitely a Dana and based on the casting number it looks like a D-60. Here is a link to another reference to this axle:

http://67-72chevytrucks.com/vboard/s....php?p=3615814

trukindud · 11-25-2009, 12:54 AM

thanks that was way use full so dose any one know what all the numbers stand for on the back

68 C-10 Panel · 11-25-2009, 02:37 AM

To get all the info about the dana 60 go to pirate4x4.com and look it up. They have everything listed. I have one of these out of a dodge and am upgrading my corporate 10 bolt in my 88 blazer. Those damn 38.5" tires have a way of destroying 1/2 ton axles. If you need the link to the d60 page let me know and ill look up the link in my bookmarks.

trukindud · 11-25-2009, 01:59 PM

Quote:

Originally Posted by 68 C-10 Panel

To get all the info about the dana 60 go to pirate4x4.com and look it up. They have everything listed. I have one of these out of a dodge and am upgrading my corporate 10 bolt in my 88 blazer. Those damn 38.5" tires have a way of destroying 1/2 ton axles. If you need the link to the d60 page let me know and ill look up the link in my bookmarks.

yeah if you would that would be sweet!

chaosdsr · 11-25-2009, 10:30 AM

Its a dana 60 for sure, there have been a few that popped up here but I have never seen an option for this on the 67-72 trucks. Heres another truck on the boards with one http://67-72chevytrucks.com/vboard/s....php?p=3615814

11-24-2009, 01:15 AM	#1
trukindud Registered User Join Date: Jul 2007 Location: hooper ut Posts: 77	67-68 rear ends what rear ends came stock in 67-68? __________________ 64 buick skylark 65 buick skylark 67 chevy 2wd Lb 68 2w Lb 05 chevy colbalt

11-24-2009, 01:17 AM	#2
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: 67-68 rear ends 6 lug 12 bolt __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

11-24-2009, 01:19 AM	#3
trukindud Registered User Join Date: Jul 2007 Location: hooper ut Posts: 77	Re: 67-68 rear ends was there any othere options __________________ 64 buick skylark 65 buick skylark 67 chevy 2wd Lb 68 2w Lb 05 chevy colbalt

11-24-2009, 01:22 AM	#4
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: 67-68 rear ends I guess I should have asked if it was a 1/2 or 3/4 ton. If a 3/4 ton then it should have an HO52 full floater. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

11-24-2009, 01:27 AM	#5
trukindud Registered User Join Date: Jul 2007 Location: hooper ut Posts: 77	Re: 67-68 rear ends 2wd cst c20 i think __________________ 64 buick skylark 65 buick skylark 67 chevy 2wd Lb 68 2w Lb 05 chevy colbalt

11-24-2009, 01:30 AM	#6
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: 67-68 rear ends Okay, should be a corporate HO52 then unless changed in the last 40 years. If a leaf spring truck then there is a chance that it could be a Dana 60. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

11-24-2009, 01:34 AM	#7
trukindud Registered User Join Date: Jul 2007 Location: hooper ut Posts: 77	Re: 67-68 rear ends this is the one that came out __________________ 64 buick skylark 65 buick skylark 67 chevy 2wd Lb 68 2w Lb 05 chevy colbalt

11-24-2009, 01:36 AM	#8
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: 67-68 rear ends If that is an 8 lugger than I would say that is a Dana 60. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

11-24-2009, 01:39 AM	#9
trukindud Registered User Join Date: Jul 2007 Location: hooper ut Posts: 77	Re: 67-68 rear ends 6 lug __________________ 64 buick skylark 65 buick skylark 67 chevy 2wd Lb 68 2w Lb 05 chevy colbalt

11-24-2009, 02:05 AM	#10
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: 67-68 rear ends Hmmm, 6 lug in a C20? 6 lugs implies 1/2 ton or C10. Should be a 12 bolt or maybe a Dana 44. Need to see the rear cover to ID. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

11-24-2009, 02:09 AM	#11
trukindud Registered User Join Date: Jul 2007 Location: hooper ut Posts: 77	Re: 67-68 rear ends well i know its not a 12 bolt __________________ 64 buick skylark 65 buick skylark 67 chevy 2wd Lb 68 2w Lb 05 chevy colbalt

11-24-2009, 02:11 AM	#12
trukindud Registered User Join Date: Jul 2007 Location: hooper ut Posts: 77	Re: 67-68 rear ends did chevy ever put a dana 44 in a 67 -68 truck __________________ 64 buick skylark 65 buick skylark 67 chevy 2wd Lb 68 2w Lb 05 chevy colbalt

11-24-2009, 02:15 AM	#13
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: 67-68 rear ends I think they did in some of the leaf spring trucks. Is it a 10 bolt? __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club** Last edited by shaneschevys; 11-24-2009 at 02:17 AM.

11-24-2009, 02:20 AM	#14
trukindud Registered User Join Date: Jul 2007 Location: hooper ut Posts: 77	Re: 67-68 rear ends its coil __________________ 64 buick skylark 65 buick skylark 67 chevy 2wd Lb 68 2w Lb 05 chevy colbalt

11-24-2009, 02:25 AM	#15
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: 67-68 rear ends I guess they could have put them in coil spring trucks. I have always seen them in leaf spring trucks. __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**



Register or Log In To remove these advertisements.

11-24-2009, 02:25 AM	#16
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: 67-68 rear ends There were D44 put in these trucks. I personally have not seen one but have seen them pop up on this board several times. It is possible that a 6 lug D60 was swapped in later. On the dana's you can usually find a casting number in the webbing. Look for 44 or 60. If you had a picture of the cover we could at least ID if it is a dana. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

11-24-2009, 08:00 PM	#17
trukindud Registered User Join Date: Jul 2007 Location: hooper ut Posts: 77	Re: 67-68 rear ends [ATTACH][/ATTACH] is this what you were talking about or one of the othere numbers Attached Images __________________ 64 buick skylark 65 buick skylark 67 chevy 2wd Lb 68 2w Lb 05 chevy colbalt

11-24-2009, 08:55 PM	#18
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: 67-68 rear ends Looks like a Dana 60. My D-60 is 6 lug, but most are 8 lug. An original C20 would have 8 lugs every time. __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

11-24-2009, 09:41 PM	#19
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: 67-68 rear ends I've only seen D-44's up front. (A D-44 is my front axle) __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

11-24-2009, 11:39 PM	#20
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: 67-68 rear ends mine had a 6 lug 10 bolt when i got mine, but not a dana 44. but now it has a 71-72 5 lug 12 bolt, with 76 c10 rear drum brakes on it

11-25-2009, 12:28 AM	#21
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: 67-68 rear ends Definitely a Dana and based on the casting number it looks like a D-60. Here is a link to another reference to this axle: http://67-72chevytrucks.com/vboard/s....php?p=3615814 __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

11-25-2009, 12:54 AM	#22
trukindud Registered User Join Date: Jul 2007 Location: hooper ut Posts: 77	Re: 67-68 rear ends thanks that was way use full so dose any one know what all the numbers stand for on the back __________________ 64 buick skylark 65 buick skylark 67 chevy 2wd Lb 68 2w Lb 05 chevy colbalt Last edited by trukindud; 11-25-2009 at 01:21 AM. Reason: gramer

11-25-2009, 02:37 AM	#23
68 C-10 Panel Registered User Join Date: Apr 2009 Location: MI Posts: 88	Re: 67-68 rear ends To get all the info about the dana 60 go to pirate4x4.com and look it up. They have everything listed. I have one of these out of a dodge and am upgrading my corporate 10 bolt in my 88 blazer. Those damn 38.5" tires have a way of destroying 1/2 ton axles. If you need the link to the d60 page let me know and ill look up the link in my bookmarks.

11-25-2009, 10:30 AM	#25
chaosdsr Registered User Join Date: Nov 2005 Location: Motor City Posts: 45	Re: 67-68 rear ends Its a dana 60 for sure, there have been a few that popped up here but I have never seen an option for this on the 67-72 trucks. Heres another truck on the boards with one http://67-72chevytrucks.com/vboard/s....php?p=3615814

Register or Log In To remove these advertisements.