700r4 installed!!! woohooo!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

roughedup72 · 06-09-2007, 01:17 PM

Well, I finished installing it last night and took it for a spin around the block.The old truck runs good with the 700r4 in her. I now have to hook up the lock power. So this morning I went took cmc u pull it and got my pig tale. While I was ther I was looking for a a/c compressor And low and behold right before my very eyes sat a 72 cheyenne super. Holy **** batman!! I walked up to it thinking it was gutted and I was wrong. I lifted the hood and there it was. The hard to find ac comp. that I've been looking for for two years, brackets and all. So I went to dissmantling. Got all of it for $58.00. I asked if he could sale me the whole truck but he said no. Its even got a four core radiator. I think I'm going back monday to get it.. It also still has the dash with wood grain and the glove box door. I dont know what rear end was in it because the sticker was faided real bad. anybody have any Idea how to tell what gears are in it?

paaw · 06-09-2007, 01:38 PM

great find, went through the same situation looking for my brackets, hooked mine up last night and the compressor started making noises when i cut the ac on, so now have 2 find new compressor. chico

centsless · 06-09-2007, 01:56 PM

Nice find!!

PanelDeland · 06-09-2007, 04:00 PM

There's a code on the right side of the rear axle.You will probably have to clean it off with a wire brush to read it.If the wheels are off the ground you can also rotate and get close enough to tell.3 3/4 turns +3:73 4.+=4.11
etc.

roughedup72 · 06-09-2007, 09:22 PM

Thanks for the info. I have a cousin looking for a 3.73 posi, I already have one in mine so i'm just trying to look out for him.

I wish cmc would sale me the whole truck. It wasnt in that great of shape but it still had some good parts on it.

sodak69c10 · 06-09-2007, 10:18 PM

Quote:

Originally Posted by PanelDeland

There's a code on the right side of the rear axle.You will probably have to clean it off with a wire brush to read it.If the wheels are off the ground you can also rotate and get close enough to tell.3 3/4 turns +3:73 4.+=4.11
etc.

exactly, plus if it won't turn with one wheel off ground jack both up and if they both turn the same dirrection when spun it is a posi unit

67ChevyRedneck · 06-09-2007, 10:22 PM

Sounds like you had a lucky day. Did it have a tach or tilt???

If the truck was an auto, it was most likely a 3.07. Manual would probably be a 3.73.

GREASEMONKEY72 · 06-10-2007, 05:01 AM

sweet find, to bad he wont sell you the whole truck, i hate when they do that

roughedup72 · 06-10-2007, 11:02 PM

It didnt have a tach, or tilt,I sure wish it did. I would of been all over it. I was just stoked about finding the ac parts I need.

06-09-2007, 01:17 PM	#1
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	700r4 installed!!! woohooo!! Well, I finished installing it last night and took it for a spin around the block.The old truck runs good with the 700r4 in her. I now have to hook up the lock power. So this morning I went took cmc u pull it and got my pig tale. While I was ther I was looking for a a/c compressor And low and behold right before my very eyes sat a 72 cheyenne super. Holy **** batman!! I walked up to it thinking it was gutted and I was wrong. I lifted the hood and there it was. The hard to find ac comp. that I've been looking for for two years, brackets and all. So I went to dissmantling. Got all of it for $58.00. I asked if he could sale me the whole truck but he said no. Its even got a four core radiator. I think I'm going back monday to get it.. It also still has the dash with wood grain and the glove box door. I dont know what rear end was in it because the sticker was faided real bad. anybody have any Idea how to tell what gears are in it? __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

06-09-2007, 01:38 PM	#2
paaw Registered User Join Date: Feb 2006 Location: nashville Posts: 217	Re: 700r4 installed!!! woohooo!! great find, went through the same situation looking for my brackets, hooked mine up last night and the compressor started making noises when i cut the ac on, so now have 2 find new compressor. chico __________________ 1997 pontiac grand prix gt (daily driver) for now; 2004 dodge ram quad cab (wife's truck) 4.7; 2000 pontiac booneville (wife daily driver) 1972 chevy cheyenne 350 bored 40 over 700r trans 373 gears ( posi) soon to be daily driver; 2002 gsxr750 sold

06-09-2007, 01:56 PM	#3
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: 700r4 installed!!! woohooo!! Nice find!! __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

06-09-2007, 04:00 PM	#4
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: 700r4 installed!!! woohooo!! There's a code on the right side of the rear axle.You will probably have to clean it off with a wire brush to read it.If the wheels are off the ground you can also rotate and get close enough to tell.3 3/4 turns +3:73 4.+=4.11 etc. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

06-09-2007, 09:22 PM	#5
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: 700r4 installed!!! woohooo!! Thanks for the info. I have a cousin looking for a 3.73 posi, I already have one in mine so i'm just trying to look out for him. I wish cmc would sale me the whole truck. It wasnt in that great of shape but it still had some good parts on it. __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

06-09-2007, 10:22 PM	#7
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 700r4 installed!!! woohooo!! Sounds like you had a lucky day. Did it have a tach or tilt??? If the truck was an auto, it was most likely a 3.07. Manual would probably be a 3.73. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 06-09-2007 at 10:23 PM.

06-10-2007, 05:01 AM	#8
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: 700r4 installed!!! woohooo!! sweet find, to bad he wont sell you the whole truck, i hate when they do that __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

06-10-2007, 11:02 PM	#9
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: 700r4 installed!!! woohooo!! It didnt have a tach, or tilt,I sure wish it did. I would of been all over it. I was just stoked about finding the ac parts I need. __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.