|
|
|
05-30-2004, 10:00 PM
|
#1 |
|
Registered User
Join Date: Feb 2003
Location: Lakewood,Ca
Posts: 69
|
Gearing in my HO52
Hey ya'll i have a couple questions and i hope you someone can help me.I think i remember reading somewhere that all of the ho52's came with 4.11,4.56,or 5.13 gearing.Is this true?I found a formula in a magazine to figure out your gearing and after i did the math i came up with 5.13 gearing?Im running a 383 with a 4 speed on 33in tires,im doing 65mph at 3500 rpm.Does 5.13's sound right?Is there any numbers i can look up to find out for sure without pulling off the cover?I heard its a pain to seal the cover.If i do have these gears how common are they?Any help with any of this will be greatly appreciate.Thanks guys....keep truckin'!
__________________
1969 C-20,383 stroker,sm465,custom long travel front suspension,4 wheel disc brakes,35" pro comps...mods under way include: 4x4 conversion,and custom bumpers.future mods include: gear vendors od unit,and relocation of fuel cell. |
|
|
|
05-30-2004, 10:31 PM
|
#2 |
|
Registered User
Join Date: Jan 2002
Location: Calgary, Alberta, Canada
Posts: 451
|
Go to www.randysringandpinion.com, and use the calculators. You need to measure your tire size (circumference) with a tape measure, and your top tranny gear should be 1:1
__________________
72 C10 Cheyenne Super Full trim Factory tach dash A/C dash Factory tilt 350 / 350 power train - with Edelbrock components. |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
