![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
![]() Join Date: Nov 2022
Location: So central coast, CA
Posts: 391
|
69 column w/o tilt parts help needed
Once again what I thought would be simple is made difficult by parts searching. I am at my wit's end! Need to find a vendor or sells OEM or OER.
Restoring a 69 C10 (K10) non tilt, floor shift only column and have been stuck for a week trying to locate 3 little parts without luck. Not broken or wore out by any means but since I have it blown completely apart for paint, I thought I would replace everything consumable. Can reuse if no vendor found. Parts needed: Upper column bearing holder (manual just calls it a washer) and rubber washer that attaches to it. Lower column white plastic bushing. Any help would be appreciated. |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() ![]() Join Date: Jan 2005
Location: CA
Posts: 5,480
|
Re: 69 column w/o tilt parts help needed
Here's the lower one:
https://www.ebay.com/itm/12526640170...Bk9SR66FyqHVYQ The other two parts are unique to the floor shift column. Might be difficult to find. I can't find them in the parts catalog. http://67-72chevytrucks.com/vboard/s...d.php?t=827926 Seeing as how the housing that sits between these bushing never rotates, I wouldn't expect them to ever wear out. |
![]() |
![]() |
![]() |
#3 | |
Senior Member
![]() Join Date: Nov 2022
Location: So central coast, CA
Posts: 391
|
Re: 69 column w/o tilt parts help needed
Quote:
|
|
![]() |
![]() |
![]() |
#4 | |
Always on the hunt...
![]() Join Date: Sep 2006
Location: Portland, OR.
Posts: 5,604
|
Re: 69 column w/o tilt parts help needed
Quote:
![]() http://67-72chevytrucks.com/vboard/s...d.php?t=838093
__________________
***For any return/past customers & friends*** Before sending of any funds, please wait for a confirmed total and instructions for sending as our payment account info has been changed as of Jan. 2023. Thanks... |
|
![]() |
![]() |
![]() |
#5 | |
Senior Member
![]() Join Date: Nov 2022
Location: So central coast, CA
Posts: 391
|
Re: 69 column w/o tilt parts help needed
Quote:
Thanks |
|
![]() |
![]() |
![]() |
#6 |
Always on the hunt...
![]() Join Date: Sep 2006
Location: Portland, OR.
Posts: 5,604
|
Re: 69 column w/o tilt parts help needed
We just posted some pics and details in that above linked steering column parts f/s thread, have a look and let us know. Mel
![]()
__________________
***For any return/past customers & friends*** Before sending of any funds, please wait for a confirmed total and instructions for sending as our payment account info has been changed as of Jan. 2023. Thanks... |
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Apr 2010
Location: St.Peters, MO
Posts: 2,226
|
Re: 69 column w/o tilt parts help needed
In your 1st picture you are calling the white bushing a lower column bushing when fact it is the lower bushing that is in the top of the column that should have a metal washer underneath it, the part you have high lighted in yellow in the 1st picture is the top of the column, hope this helps
|
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() Join Date: Nov 2022
Location: So central coast, CA
Posts: 391
|
Re: 69 column w/o tilt parts help needed
Good eye, you are correct.
I should have worded it better. Unfortunately, they are above and below each other in close proximity and have the same names per the manual (washer/bushing) so I described them as upper and lower to try and get my point to register. I guess just showing the picture may have done the trick for most. Thanks for the response as I would not want others being confused when doing any parts search. |
![]() |
![]() |
![]() |
Bookmarks |
|
|