L6 Exhaust Manifold Source - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71meangreenc10 · 06-18-2005, 09:44 PM

After searching for a manifold for my 250, I ve come across stevensparts.com or 1800 443 2673, this guy is in tx and has exhaust manifolds in stock,,,,,,,,supposed to be new...good info must be passed along.

Smitty

Dick Dale · 06-18-2005, 09:57 PM

Go to http://www.cliffordperformance.com/ and run a big 2 barrel. Hop it up a little

71meangreenc10 · 06-18-2005, 10:03 PM

I talked to cliffs, and he isnt making anymore manifolds till july......

**'68OrangeSunshine** · 06-19-2005, 06:11 AM

Check out Tom Langdon's Stovebolt Engine Company. He has Offy intakes for L22 series L6s (194, 230, 250, 292) for about $180. He also carries his own Cast Iron Headers, very similar to stockers but they flow. And other cool stuff.

http://www.stoveboltengineco.com/

Mr Langdon is a retired GM design engineer IIRC. He knows the L6s real good.
Personnally I've been real happy with an Offenhauser 4Bbl intake, and Clifford headers on my 292. I'm now using an Edelbrock 500 CFM AFB Carter-clone. But I used to run a 4Bbl Holley 390 CFM.
You might also check out classifieds on the Inliners International site:

www.inliners.org

Good Luck.

shifty · 06-20-2005, 03:55 PM

Man, I paid $160 for these Dynomax headers because both of my manifolds were pretty rough. I had hoped they would pop right in....no such luck.

More info here: http://67-72chevytrucks.com/vboard/s...16#post1302216

I want to go to dual exhaust. Hate to think I threw away $160. I complete whacked my exhisting exhaust an muffler to get this in, so I'm kinda screwed right now and can't get the truck running.

Learn from my work

71meangreenc10 · 06-20-2005, 06:02 PM

Trust me, I was about to get the headers, but,,,,,,call steves and he can get you the right manifold.....

shifty · 06-20-2005, 11:24 PM

Does steve have a dual exhaust setup?

Nevermind, stupid question. I found it. Part # :1006 - wait - nope, that's for 79+

Maybe I'll hafta call (but the outlets look a little smallish...)

71meangreenc10 · 06-20-2005, 11:28 PM

maybe, dont know, maybe stovebolt has that set up, for the 6 I prefer to keep it stock, now on the 8, thats another story.

boraxman · 06-21-2005, 12:04 AM

I have a pair of Clifford headers for trucks never used 150 shipped if anyones interested

06-18-2005, 09:44 PM	#1
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	L6 Exhaust Manifold Source After searching for a manifold for my 250, I ve come across stevensparts.com or 1800 443 2673, this guy is in tx and has exhaust manifolds in stock,,,,,,,,supposed to be new...good info must be passed along. Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

06-18-2005, 09:57 PM	#2
Dick Dale Excelsior, You Fathead. Join Date: Jun 2004 Location: Valparaiso, In Posts: 937	Go to http://www.cliffordperformance.com/ and run a big 2 barrel. Hop it up a little __________________ Go Navy. The Sea Is Ours. Budget 350 Build http://67-72chevytrucks.com/vboard/s...38#post2264638

06-18-2005, 10:03 PM	#3
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	I talked to cliffs, and he isnt making anymore manifolds till july...... __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

06-19-2005, 06:11 AM	#4
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,439	Check out Tom Langdon's Stovebolt Engine Company. He has Offy intakes for L22 series L6s (194, 230, 250, 292) for about $180. He also carries his own Cast Iron Headers, very similar to stockers but they flow. And other cool stuff. http://www.stoveboltengineco.com/ Mr Langdon is a retired GM design engineer IIRC. He knows the L6s real good. Personnally I've been real happy with an Offenhauser 4Bbl intake, and Clifford headers on my 292. I'm now using an Edelbrock 500 CFM AFB Carter-clone. But I used to run a 4Bbl Holley 390 CFM. You might also check out classifieds on the Inliners International site: www.inliners.org Good Luck. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

06-20-2005, 03:55 PM	#5
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Man, I paid $160 for these Dynomax headers because both of my manifolds were pretty rough. I had hoped they would pop right in....no such luck. More info here: http://67-72chevytrucks.com/vboard/s...16#post1302216 I want to go to dual exhaust. Hate to think I threw away $160. I complete whacked my exhisting exhaust an muffler to get this in, so I'm kinda screwed right now and can't get the truck running. Learn from my work __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

06-20-2005, 06:02 PM	#6
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Trust me, I was about to get the headers, but,,,,,,call steves and he can get you the right manifold..... __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

06-20-2005, 11:24 PM	#7
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Does steve have a dual exhaust setup? Nevermind, stupid question. I found it. Part # :1006 - wait - nope, that's for 79+ Maybe I'll hafta call (but the outlets look a little smallish...) __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. Last edited by shifty; 06-20-2005 at 11:28 PM.

06-20-2005, 11:28 PM	#8
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	maybe, dont know, maybe stovebolt has that set up, for the 6 I prefer to keep it stock, now on the 8, thats another story. __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

06-21-2005, 12:04 AM	#9
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,921	I have a pair of Clifford headers for trucks never used 150 shipped if anyones interested __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.