Gauging interest thinking of selling out!!!

[GloryHound]

I'm considering selling off my project and parts. If I do this I want a clean sweep so I have to get rid of everything at once. Here is a list of the big stuff I have and then there is alot of little stuff.

LWB 69 GMC w/title cab and frame looks good/ bed needs some work / the front clip and moter have been removed rest of drive terrain is still there. Has complete green interior and glass. Origional style seat cover on it. Have never looked at the bench seat to see its condition but it feels solid and would probably only need re covered

Bare short wheel base frame solid but has a slight bend in it needs to go to frame straightener. set up for coil spring rear. (comes with a PA title and vin plate but the title was never transfered to me. for 71 swb)

Short wheel base bed solid but needs some work. one inner wheel well gone the other is removed.

1 pair 68 chevy fenders need lower rear patch panels on both.
2 pair 68-72 GMC fenders need lower rear patch panels and one has big dent
1 67 drivers side front fender no rust but a dent in the front.
1 71 chevy drivers front fender needs front cup patched.

1 67-68 chevy hood no rust couple of little dents in the front.
1 67-68 chevy core support not perfect but looks like easily repairable.
2 67-68 chevy grills one is excellent the other has seen better days.

2 auto steering columns one in the 69 cab is green and one black both have steering wheels attached.
1 floor shift steering column with steering wheel black.

1 V-8 305 ran when removed from 69
2 V-8 350's unknown condition
1 th350 tranny in 69 GMC
1 th350 lock up

3 two barrel SBC manifolds with 2 barrel carbs.

2 pair of trailing arms.
complete drum cross member with power steering in 69 GMC
extra set of drum spindles with drums on them
1 pair 71/72 disc spindles with disc's and calipars (calipars for core charge)

One trailing arm 6 bolt rear end
one leaf spring 6 bolt rear end in 69 GMC
One piece drive shaft for SWB

1 instrument cluster in GMC (Green) with gauges but no tach or vaccum
1 instrument cluster with gauges but not tach or vaccum.

1 extra auto cross member + the one in the 69 GMC.
1 extra bare front cross member.
1 fairly new 3 core radiator

The 69 cab has both doors on it and they are complete and could be repaired.
1 extra passenger side door that looks pretty good.
1 pair of complete doors probably not fixable but could use the glass regulators wing glass ect.

A whole bunch of crome for chevy's and GMC's.
1 GMC stamped tailgate that is on the 69 GMC needs rust repair.

1 69 GMC core support probably shot but might be able to repair it.

1 complete set of poly bushings and bolts for reattaching the rear control arms, rear end and panhard bar.

Thier is a lot of stuff I'm missing, but it all goes for $2000.00 OBO or looking to trade for a 60's muscle car project. Rust can be fixed as long as the structure around it is not damaged. My wife likes the early mustang convertables but I just want to make something that looks good and goes fast.

[Joe67]

If you end up parting it out... I'd be interested in pics of these items:

1 67 drivers side front fender no rust but a dent in the front.
2 67-68 chevy grills one is excellent the other has seen better days

Also, do you have a NICE chrome front bumper?

Thanks.

[GloryHound]

A couple of things I forgot!

2 boosters, master cylinders, and proportioning valves for power front disc brakes.
1 master cylinder and proportioning valve for drum to drum manual brakes. (Still on 69 GMC)
1 extra power steering gear box and pump and the power steering set up on the 69 GMC.
8 of those 6 lug white rims that look good on 4X4's. Have tires but not good.
1 pair rear coils stock
1 extra pair of front coils.
a bunch of SBC engine brackets and pulleys.

[GloryHound]

Sorry nothing will leave this lot until I either do the project or sell it all off together. If I started selling the pieces individually it would not be fair to who ever buys the whole Thing.

[Joe67]

No sweat. Keep me in mind if you change your mind, I see other items I'm sure I'll need as my project progresses

[GloryHound]

Also a pair of bucket seats that go with it but I'm not sure what they came out of.

[GloryHound]

More pictures

[GloryHound]

One last group of pictures. If your serious about getting everything I can get some individual pictures of stuff if you need it. Also I have access to a small car hauler and can help get this stuff to your place as long as it is not more than 200 miles.

[GloryHound]

More pics of LWB

[GloryHound]

Any reasonable offers for the whole deal?