CA New drop spindles, tail lights, parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WellBilt Kustoms · 06-14-2010, 05:17 PM

I have a pair of Brand new, never installed, BellTech 3" drop spindles for C10/C15/suburban. There were going onto a customers truck, but the truck was sold. I'd prefer to sell to someone local, but if I can't find anyone in a few days, I will ship them out. Looking to get $200 for them. Comes with cotter pins.

Also have a pair of those clear lense, euro tail lights. Looking to get $20 for them.

Were starting to part out a 1986 suburban as well. Motor/trans. are gone. Middle and front seats are sold already as well. Let me know if your needing anything off of it. Had a 350 in it.

Email me for quickest response.

WellBiltkustoms@aol.com

dabruce15 · 06-14-2010, 05:19 PM

Quote:

Originally Posted by WellBilt Kustoms

I have a pair of Brand new, never installed, BellTech 3" drop spindles for C10/C15/suburban. There were going onto a customers truck, but the truck was sold. I'd prefer to sell to someone local, but if I can't find anyone in a few days, I will ship them out. Looking to get $200 for them. Comes with cotter pins.

Also have a pair of those clear lense, euro tail lights. Looking to get $20 for them.

Were starting to part out a 1986 suburban as well. Motor/trans. are gone. Middle and front seats are sold already as well. Let me know if your needing anything off of it. Had a 350 in it.

Email me for quickest response.

WellBiltkustoms@aol.com

I'm local.

dabruce15 · 06-14-2010, 05:24 PM

What years do these fit?

WellBilt Kustoms · 06-14-2010, 05:48 PM

The spindles will fit on any 73-87 Chevy/GMC c10,full size blazer,silverado,sierra,full size jimmy.
And 73-91 Suburban

Says all 2wd, and that use a 1.25" rotor

I can take a pic if you'd like, but there brand new spindles, so they look just like any that you would see posted online. Still have the plastic protective cover caps on the ends.

Spindles are located at my shop in Buena Park. Let me know if you'd like to come by and get them.

Thanks!

bigdnew · 06-14-2010, 11:36 PM

do you have pics of taillights and how much for shipping to 38701. thanks.

WellBilt Kustoms · 06-15-2010, 01:12 AM

Quote:

Originally Posted by bigdnew

do you have pics of taillights and how much for shipping to 38701. thanks.

I'll post up pics tomorrow when I get back to the shop. I'll check on shipping costs as well for you.

The taillights are the smooth lense version. No bulge in the clear cover.

texasfunk · 06-15-2010, 12:28 AM

Quote:

Originally Posted by WellBilt Kustoms

I have a pair of Brand new, never installed, BellTech 3" drop spindles for C10/C15/suburban. There were going onto a customers truck, but the truck was sold. I'd prefer to sell to someone local, but if I can't find anyone in a few days, I will ship them out. Looking to get $200 for them. Comes with cotter pins.

Also have a pair of those clear lense, euro tail lights. Looking to get $20 for them.

Were starting to part out a 1986 suburban as well. Motor/trans. are gone. Middle and front seats are sold already as well. Let me know if your needing anything off of it. Had a 350 in it.

Email me for quickest response.

WellBiltkustoms@aol.com

are the euros th the smooth lenses and dont have a bulge from the reflector?

dabruce15 · 06-15-2010, 11:22 AM

I'll pass, I'm looking for '72 spindles. I didn't realize I was in the wrong board. Good deal for someone though!

WellBilt Kustoms · 06-15-2010, 02:36 PM

No Problem! Have you checked JEGS or Summit? Last I looked, there were priced pretty well from both places.

CenValyCali · 06-15-2010, 05:23 PM

I'll take the spindles if you'll ship. Let me know. I can paypal today. Thanks

Adam

WellBilt Kustoms · 06-15-2010, 05:27 PM

Quote:

Originally Posted by CenValyCali

I'll take the spindles if you'll ship. Let me know. I can paypal today. Thanks

Adam

Whats your address so I can check on shipping costs?

Thanks

CenValyCali · 06-15-2010, 07:05 PM

93230

texasfunk · 06-16-2010, 12:01 AM

can you also check shipping on the tailights to 79413? thank you!

Seven9er · 06-16-2010, 11:02 AM

you have any 73+ lower control arms? specifically the shaft? if so how much to 39507? thanks.

SevenSeries · 06-16-2010, 11:20 AM

Ill take them today if you can. Shipped to 96007. Pm me if you wanna talk more

bigdnew · 06-16-2010, 09:20 PM

any updates

WellBilt Kustoms · 06-17-2010, 01:21 PM

Sorry for lagging on you guys. Wife was sick yesturday, so I had to deal with that, and take care of the kids while still working at the shop. Not fun!

I will pull up the shipping costs right now online.

Here are the pics of the tail lights.

WellBilt Kustoms · 06-17-2010, 01:53 PM

Sending pm's with shipping quotes to everyone who's asked.

WellBilt Kustoms · 06-18-2010, 04:33 PM

Lights are pending sale

Seven9er · 06-18-2010, 05:01 PM

I never got a PM

yellowGT · 06-23-2010, 02:13 AM

if it makes it to me put me down for the drop spindles. Im in 75040

WellBilt Kustoms · 06-23-2010, 07:24 PM

Drop spindles sold to a local buyer.

Taillights are pending sale to Bigdnew

I still have alot of good exterior body parts off of the suburban (Hood, Both front fenders, GMC grill, headlight bezels, front bumper, Side windows,tailgate with glass)

I still have a headliner thats in good condition, gauge cluster, side panels, and anything under the hood minus the engine block and tranny.

Still have the gas tank, drive shaft, and the helper spring kit for towing.

bigdnew · 06-23-2010, 10:25 PM

PM sent

WellBilt Kustoms · 06-24-2010, 04:27 PM

Tail lights are boxed up and going out today!

RandyP · 06-24-2010, 05:13 PM

Does it have a factory radio? If so, is it ETR? (digital display/clock, RPO code would be UM6 if memory serves)

06-14-2010, 05:17 PM	#1
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	New drop spindles, tail lights, parts I have a pair of Brand new, never installed, BellTech 3" drop spindles for C10/C15/suburban. There were going onto a customers truck, but the truck was sold. I'd prefer to sell to someone local, but if I can't find anyone in a few days, I will ship them out. Looking to get $200 for them. Comes with cotter pins. Also have a pair of those clear lense, euro tail lights. Looking to get $20 for them. Were starting to part out a 1986 suburban as well. Motor/trans. are gone. Middle and front seats are sold already as well. Let me know if your needing anything off of it. Had a 350 in it. Email me for quickest response. WellBiltkustoms@aol.com

06-14-2010, 05:24 PM	#3
dabruce15 Registered User Join Date: Mar 2009 Location: Chatsworth, CA Posts: 236	Re: New drop spindles, tail lights, parts What years do these fit? __________________ Beauty is in the eye of the beer-holder. Praise the lowered!

06-14-2010, 05:48 PM	#4
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Re: New drop spindles, tail lights, parts The spindles will fit on any 73-87 Chevy/GMC c10,full size blazer,silverado,sierra,full size jimmy. And 73-91 Suburban Says all 2wd, and that use a 1.25" rotor I can take a pic if you'd like, but there brand new spindles, so they look just like any that you would see posted online. Still have the plastic protective cover caps on the ends. Spindles are located at my shop in Buena Park. Let me know if you'd like to come by and get them. Thanks!

06-14-2010, 11:36 PM	#5
bigdnew Never Satisfied Join Date: Sep 2009 Location: Sherman, Texas Posts: 360	Re: New drop spindles, tail lights, parts do you have pics of taillights and how much for shipping to 38701. thanks. __________________ 1973 4x4 Blazer- Parting Out 1986 LWB Silverado Undergoing LQ4/4L80E Swap '86 Build Thread:http://67-72chevytrucks.com/vboard/showthread.php?t=390566

06-15-2010, 11:22 AM	#8
dabruce15 Registered User Join Date: Mar 2009 Location: Chatsworth, CA Posts: 236	Re: New drop spindles, tail lights, parts I'll pass, I'm looking for '72 spindles. I didn't realize I was in the wrong board. Good deal for someone though! __________________ Beauty is in the eye of the beer-holder. Praise the lowered!

06-15-2010, 02:36 PM	#9
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Re: New drop spindles, tail lights, parts No Problem! Have you checked JEGS or Summit? Last I looked, there were priced pretty well from both places.

06-15-2010, 05:23 PM	#10
CenValyCali Registered User Join Date: Mar 2010 Location: Hanford, Ca Posts: 139	Re: New drop spindles, tail lights, parts I'll take the spindles if you'll ship. Let me know. I can paypal today. Thanks Adam

06-15-2010, 07:05 PM	#12
CenValyCali Registered User Join Date: Mar 2010 Location: Hanford, Ca Posts: 139	Re: New drop spindles, tail lights, parts 93230

06-16-2010, 12:01 AM	#13
texasfunk Registered User Join Date: Jun 2009 Location: Lubbock, TX Posts: 1,671	Re: New drop spindles, tail lights, parts can you also check shipping on the tailights to 79413? thank you! __________________ 2006 GMC Sierra CCSB, 6.0 swap 2000 Chevy C3500 Crew Cab shortbed dually 1999 Chevy c2500 Crew Cab shortbed 1982 El Camino 350/350 1979 K5 2wd blazer bagged/bodied 1986 Monte Carlo SS 1991 Chevy CK SWB-67 clip and tailgate, bagged 350/700r4 1955 Chevy Bel Air 2014 Chevy Silverado ccsb

06-16-2010, 11:02 AM	#14
Seven9er Registered User Join Date: Jun 2010 Location: Gulfport, MS Posts: 108	Re: New drop spindles, tail lights, parts you have any 73+ lower control arms? specifically the shaft? if so how much to 39507? thanks. __________________ USMC Former SGT 2002-2006 Oshkosh Truck Corporation- FSR, The worlds largest manufacturer of Severe Duty Trucks. The Money Pit. http://67-72chevytrucks.com/vboard/s...d.php?t=406891 2009 2500HD R.I.P. http://67-72chevytrucks.com/vboard/s...12#post4025612

06-16-2010, 11:20 AM	#15
SevenSeries Registered User Join Date: Mar 2010 Location: California Posts: 147	Re: New drop spindles, tail lights, parts Ill take them today if you can. Shipped to 96007. Pm me if you wanna talk more __________________ With enough time and money, you can do anything Quoted from my father 1976 C-10 Project

06-16-2010, 09:20 PM	#16
bigdnew Never Satisfied Join Date: Sep 2009 Location: Sherman, Texas Posts: 360	Re: New drop spindles, tail lights, parts any updates __________________ 1973 4x4 Blazer- Parting Out 1986 LWB Silverado Undergoing LQ4/4L80E Swap '86 Build Thread:http://67-72chevytrucks.com/vboard/showthread.php?t=390566

06-17-2010, 01:21 PM	#17
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Re: New drop spindles, tail lights, parts Sorry for lagging on you guys. Wife was sick yesturday, so I had to deal with that, and take care of the kids while still working at the shop. Not fun! I will pull up the shipping costs right now online. Here are the pics of the tail lights.

06-17-2010, 01:53 PM	#18
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Re: New drop spindles, tail lights, parts Sending pm's with shipping quotes to everyone who's asked.

06-18-2010, 04:33 PM	#19
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Re: New drop spindles, tail lights, parts Lights are pending sale



Register or Log In To remove these advertisements.

06-18-2010, 05:01 PM	#20
Seven9er Registered User Join Date: Jun 2010 Location: Gulfport, MS Posts: 108	Re: New drop spindles, tail lights, parts I never got a PM __________________ USMC Former SGT 2002-2006 Oshkosh Truck Corporation- FSR, The worlds largest manufacturer of Severe Duty Trucks. The Money Pit. http://67-72chevytrucks.com/vboard/s...d.php?t=406891 2009 2500HD R.I.P. http://67-72chevytrucks.com/vboard/s...12#post4025612

06-23-2010, 02:13 AM	#21
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: New drop spindles, tail lights, parts if it makes it to me put me down for the drop spindles. Im in 75040 __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

06-23-2010, 07:24 PM	#22
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Re: New drop spindles, tail lights, parts Drop spindles sold to a local buyer. Taillights are pending sale to Bigdnew I still have alot of good exterior body parts off of the suburban (Hood, Both front fenders, GMC grill, headlight bezels, front bumper, Side windows,tailgate with glass) I still have a headliner thats in good condition, gauge cluster, side panels, and anything under the hood minus the engine block and tranny. Still have the gas tank, drive shaft, and the helper spring kit for towing.

06-23-2010, 10:25 PM	#23
bigdnew Never Satisfied Join Date: Sep 2009 Location: Sherman, Texas Posts: 360	Re: New drop spindles, tail lights, parts PM sent __________________ 1973 4x4 Blazer- Parting Out 1986 LWB Silverado Undergoing LQ4/4L80E Swap '86 Build Thread:http://67-72chevytrucks.com/vboard/showthread.php?t=390566

06-24-2010, 04:27 PM	#24
WellBilt Kustoms Registered User Join Date: Jan 2010 Location: Orange County, CA Posts: 384	Re: New drop spindles, tail lights, parts Tail lights are boxed up and going out today!

06-24-2010, 05:13 PM	#25
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: New drop spindles, tail lights, parts Does it have a factory radio? If so, is it ETR? (digital display/clock, RPO code would be UM6 if memory serves)

Register or Log In To remove these advertisements.