Fuel injection for in line 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Truck Dr. · 11-05-2009, 08:37 PM

Does anyone have or know of fuel injection for an in line 6.
I have not seen any and think it would improve the drive ability and mileage for the 6, as the carbs just plain suck, they were great for the time but I think that a TBI on a 6 would be good, ultimate would be a port type system, although I don't know how this could be accomplished, that is why I say TBI.

Anyone??? ...Discuss ???

any ideas

Dave

Neal Molder · 11-05-2009, 08:48 PM

I don't know how ,but that would make for one hell of a reliable engine if you could do it.

mindhive · 11-05-2009, 08:53 PM

Get an Offy 4bbl manifold and put a holley pro-jection or try to put a Howell 2bbl gm style system on the stock manifold.

71swb4x4 · 11-05-2009, 08:59 PM

Someone on here did a budget fuel injection addition to their 6 sylinder. I can't remember who, but I will do some searching.

71swb4x4 · 11-05-2009, 09:05 PM

Here is one: http://www.67-72chevytrucks.com/vboa...fuel+injection

unclewatts · 11-05-2009, 10:10 PM

I think that it would be so cool to do that and I agree that TBI would be the only way to go. If you do it, keep us posted with pictures so we can check it out.

mjensen · 11-05-2009, 10:21 PM

If you're real handy, there is a kit called Megasquirt. We did this for an 1835 VW, and it was a blast and fairly easy to setup. I liked it because I could put the whole thing together, from computer to intake runner. It's an open-source F.I. kit.

http://www.megamanual.com/index.html

There's a lot of research to be done, but it's fun and a lot cheaper than even the holley setup.

hounder · 11-06-2009, 01:09 AM

clifford 6=8 has a comp. fuel injection set up for the inline 6 it is a bit pricey

Truck Dr. · 11-06-2009, 05:03 AM

Quote:

Originally Posted by Neal Molder

I don't know how ,but that would make for one hell of a reliable engine if you could do it.

That's what I thought also.

Quote:

Originally Posted by mindhive

Get an Offy 4bbl manifold and put a holley pro-jection or try to put a Howell 2bbl gm style system on the stock manifold.

Really wanted to do it with off the shelf pieces, that way it could be repaired almost anywhere.

Quote:

Originally Posted by 71swb4x4

Here is one: http://www.67-72chevytrucks.com/vboa...fuel+injection

71 thanks man, this is more of what I'm talkin about....

Quote:

Originally Posted by unclewatts

I think that it would be so cool to do that and I agree that TBI would be the only way to go. If you do it, keep us posted with pictures so we can check it out.

Take a look at the link from 71, this would be the basic configuration on any of the Chev inlines

Quote:

Originally Posted by mjensen

If you're real handy, there is a kit called Megasquirt. We did this for an 1835 VW, and it was a blast and fairly easy to setup. I liked it because I could put the whole thing together, from computer to intake runner. It's an open-source F.I. kit.

http://www.megamanual.com/index.html

There's a lot of research to be done, but it's fun and a lot cheaper than even the holley setup.

I'll take a look into it, sounds interesting.

Quote:

Originally Posted by hounder

clifford 6=8 has a comp. fuel injection set up for the inline 6 it is a bit pricey

They are pricey all around but when there are only a few players in the game you pretty much can name your game.

I really would like to use an OE style intake, and the rest GM pieces like in the link from 71.

Anymore comments or suggestions all are welcome.

Dave

Ackattack · 11-06-2009, 11:08 AM

Quote:

Originally Posted by mjensen

If you're real handy, there is a kit called Megasquirt. We did this for an 1835 VW, and it was a blast and fairly easy to setup. I liked it because I could put the whole thing together, from computer to intake runner. It's an open-source F.I. kit.

http://www.megamanual.com/index.html

There's a lot of research to be done, but it's fun and a lot cheaper than even the holley setup.

I was thinking megasquirt too

Though I also think a TBI setup off of a v6 would be pretty easy to set up also.

Truck Dr. · 11-07-2009, 04:19 PM

Just wanted to thank all who posted, there is some very good info, which has started my quest all over again to make my 6's FI, after doing much reading, there are several ways to go.
I think for my 65, it'll have to be the Megasquirt II as my 65 has a little bit of a build, and this would allow me to really tune it the way I want.
The 67 is a stock 250, so I think that I am going to embark on the wrecking yard journey to build a system out of a 87 up harness, and all the rest of the pieces.

After finding all of this info, I now will go ahead and do my conversion on an 86 G20 SWB van. it is an original carbed 4.3 with a factory 3 spd on the floor and a 3.42 posi, now it will get a FI 4.3 Vortec and a 5 spd.

So this has really opened a can of worms, I really would like to finish my 68, but am really wanting to get back to my 67 and get it finished, so I am pondering selling my 68, so I can work on the others.

Dave

mjensen · 11-07-2009, 04:45 PM

Well, if you have any questions about the MS II, let me know. I'm by no means an expert, but I have made one run

Truck Dr. · 11-07-2009, 05:19 PM

Quote:

Originally Posted by mjensen

Well, if you have any questions about the MS II, let me know. I'm by no means an expert, but I have made one run

That's great appreciate it, never can have enough help or info....as long as it's on the up and up...lol

Unfortunately that will be the last one that I'll do in order of projects, as my 65 is slated for major rust repair, many others probably wouldn't do....had a clean replacement body for it.....went away in a divorce...so now just going to repair it, no one else would want it or pay for it when it is done...lol

Dave

Truck Dr. · 11-22-2009, 01:04 PM

Well I haven't been on for awhile, had to be hospitalized for some tough health issues, but have had a little time to think about this conversion to EFI, and found another way to go for a relatively reasonable price
check it out and let me know what you think about it.

http://www.affordable-fuel-injection...on=show_detail

Dave

292farmer · 11-22-2009, 01:13 PM

does that replace old stock tbi motors or any motors? i dint see also clifford performance out of california has a TBI kit with all the wiring and parts u need, the kit runs 1000$ check it out at cliffordperformance.net even though it is a little expensive it may help point u in the direction u want, plus they have many cams and other performance parts, i would look for their intakes used first as they are expensive, or or offy as ive heard their a little better but their cams are good im looking to get one for my truck, soon as i can afford to spare a couple bucks lol

Truck Dr. · 11-22-2009, 01:26 PM

292, from what I have seen, this site has just about any type of system covered TBI, MPFI and so on, they have custom apps as well. but for your Q, Both, with and without.
Here is the homepage

They also have adapter plates for a inline 6 stock manifold, just an all around good source I think, hope others chime in on this site with any experience with them.

Dave

PanelDeland · 11-22-2009, 07:40 PM

I've thought about this also.I think the trick would be to get a manifold like the Offy and have an adapter built for it.Then all the stuff from a 4.3 should be right in the ballpark.Factory TBI with almost all factory stuff that is available anywhere.

Bigru · 03-24-2013, 12:30 PM

Hey guys, since a few year has went by since someone posted to this thread. Who has the best set up for fuel injection? Or what's the best route to take to convert to FI? Btw, I have a 292 6 cylinder.
Posted via Mobile Device

woodwright · 03-24-2013, 02:05 PM

Megasquirt is still gonna be the cheapest way to go. I'm doing this on my 250 in my Nova

Bigru · 03-24-2013, 02:11 PM

Quote:

Originally Posted by woodwright

Megasquirt is still gonna be the cheapest way to go. I'm doing this on my 250 in my Nova

Do you have a part #, I went to their site and got lost. Lol
Posted via Mobile Device

woodwright · 03-24-2013, 02:33 PM

Go to www.diyautotune.com . little easier to wade through.

mjensen · 03-24-2013, 11:23 PM

I still have to go with the megasquirt too! It really was a fun project that ran pretty well on the VW we put it on.

SS Tim · 03-24-2013, 11:56 PM

If you have the time to work through it here is an interesting blog where a guy converted his I-6 67 G van to FI and 4X4.

http://bnoble.users.sonic.net/wordpr...n-is-complete/

kieth · 12-03-2013, 03:24 PM

Here is a link for a 4.3 litre v6 tbi conversion to a 292

http://www.67-72chevytrucks.com/vboa...fuel+injection

in later parts of the thread he says he will post details on stovebolt.com website...good luck

MARKDTN · 12-03-2013, 05:16 PM

http://howellefi.com/gm-tbi-products...-tbi-kits.html

I have used their TPI stuff and it is top notch.

11-05-2009, 08:37 PM	#1
Truck Dr. Registered User Join Date: Oct 2009 Location: Rio Rancho NM Posts: 74	Fuel injection for in line 6 Does anyone have or know of fuel injection for an in line 6. I have not seen any and think it would improve the drive ability and mileage for the 6, as the carbs just plain suck, they were great for the time but I think that a TBI on a 6 would be good, ultimate would be a port type system, although I don't know how this could be accomplished, that is why I say TBI. Anyone??? ...Discuss ??? any ideas Dave __________________ Dave & Marilyn in Rio Rancho NM....1967 Chevrolet C-10 long step side.....250 3 spd. ..... 1968 Chevrolet C-10 long step side.....325 hp 350 4spd.....3" Exhaust....etc. 1965 Chevrolet Suburban K-10....292 4spd....cam....etc. Bow Tie Baby

11-05-2009, 08:48 PM	#2
Neal Molder The Black Pearl Join Date: Apr 2009 Location: Brooks Alberta Canada Posts: 63	Re: Fuel injection for in line 6 I don't know how ,but that would make for one hell of a reliable engine if you could do it.

11-05-2009, 08:53 PM	#3
mindhive Registered User Join Date: Jul 2003 Location: Mountain Home ID Posts: 85	Re: Fuel injection for in line 6 Get an Offy 4bbl manifold and put a holley pro-jection or try to put a Howell 2bbl gm style system on the stock manifold.

11-05-2009, 08:59 PM	#4
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Fuel injection for in line 6 Someone on here did a budget fuel injection addition to their 6 sylinder. I can't remember who, but I will do some searching. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

11-05-2009, 09:05 PM	#5
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Fuel injection for in line 6 Here is one: http://www.67-72chevytrucks.com/vboa...fuel+injection __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

11-05-2009, 10:10 PM	#6
unclewatts 70 Chevrolet=Obsession Join Date: Jun 2009 Location: nice ca Posts: 1,067	Re: Fuel injection for in line 6 I think that it would be so cool to do that and I agree that TBI would be the only way to go. If you do it, keep us posted with pictures so we can check it out. __________________ I'm Just like my truck. Old, Ugly and Grouchy. Except my truck starts easily in the morning and doesn't smoke! IT'S NOT EASY BEING GREEN! -Kermit the frog 1970 Chevrolet C-10 Longbed Stepside : 350, Muncie M20, 3.08 GM corp. positraction Forest green exterior/light green interior(Where all my money goes) 1996 Toyota Corolla (Parts runner)

11-05-2009, 10:21 PM	#7
mjensen Registered User Join Date: Jun 2006 Location: Utah Posts: 1,562	Re: Fuel injection for in line 6 If you're real handy, there is a kit called Megasquirt. We did this for an 1835 VW, and it was a blast and fairly easy to setup. I liked it because I could put the whole thing together, from computer to intake runner. It's an open-source F.I. kit. http://www.megamanual.com/index.html There's a lot of research to be done, but it's fun and a lot cheaper than even the holley setup. __________________ Mike '69 GMC 3/4 ton 4x4 Build Thread

11-06-2009, 01:09 AM	#8
hounder Registered User Join Date: Sep 2008 Location: Trail B.C. Canada Posts: 10	Re: Fuel injection for in line 6 clifford 6=8 has a comp. fuel injection set up for the inline 6 it is a bit pricey

11-07-2009, 04:19 PM	#11
Truck Dr. Registered User Join Date: Oct 2009 Location: Rio Rancho NM Posts: 74	Re: Fuel injection for in line 6 Just wanted to thank all who posted, there is some very good info, which has started my quest all over again to make my 6's FI, after doing much reading, there are several ways to go. I think for my 65, it'll have to be the Megasquirt II as my 65 has a little bit of a build, and this would allow me to really tune it the way I want. The 67 is a stock 250, so I think that I am going to embark on the wrecking yard journey to build a system out of a 87 up harness, and all the rest of the pieces. After finding all of this info, I now will go ahead and do my conversion on an 86 G20 SWB van. it is an original carbed 4.3 with a factory 3 spd on the floor and a 3.42 posi, now it will get a FI 4.3 Vortec and a 5 spd. So this has really opened a can of worms, I really would like to finish my 68, but am really wanting to get back to my 67 and get it finished, so I am pondering selling my 68, so I can work on the others. Dave __________________ Dave & Marilyn in Rio Rancho NM....1967 Chevrolet C-10 long step side.....250 3 spd. ..... 1968 Chevrolet C-10 long step side.....325 hp 350 4spd.....3" Exhaust....etc. 1965 Chevrolet Suburban K-10....292 4spd....cam....etc. Bow Tie Baby

11-07-2009, 04:45 PM	#12
mjensen Registered User Join Date: Jun 2006 Location: Utah Posts: 1,562	Re: Fuel injection for in line 6 Well, if you have any questions about the MS II, let me know. I'm by no means an expert, but I have made one run __________________ Mike '69 GMC 3/4 ton 4x4 Build Thread

11-22-2009, 01:04 PM	#14
Truck Dr. Registered User Join Date: Oct 2009 Location: Rio Rancho NM Posts: 74	Re: Fuel injection for in line 6 Well I haven't been on for awhile, had to be hospitalized for some tough health issues, but have had a little time to think about this conversion to EFI, and found another way to go for a relatively reasonable price check it out and let me know what you think about it. http://www.affordable-fuel-injection...on=show_detail Dave __________________ Dave & Marilyn in Rio Rancho NM....1967 Chevrolet C-10 long step side.....250 3 spd. ..... 1968 Chevrolet C-10 long step side.....325 hp 350 4spd.....3" Exhaust....etc. 1965 Chevrolet Suburban K-10....292 4spd....cam....etc. Bow Tie Baby

11-22-2009, 01:13 PM	#15
292farmer Registered User Join Date: Nov 2009 Location: stoddard nh Posts: 693	Re: Fuel injection for in line 6 does that replace old stock tbi motors or any motors? i dint see also clifford performance out of california has a TBI kit with all the wiring and parts u need, the kit runs 1000$ check it out at cliffordperformance.net even though it is a little expensive it may help point u in the direction u want, plus they have many cams and other performance parts, i would look for their intakes used first as they are expensive, or or offy as ive heard their a little better but their cams are good im looking to get one for my truck, soon as i can afford to spare a couple bucks lol Last edited by 292farmer; 11-22-2009 at 01:17 PM.

11-22-2009, 01:26 PM	#16
Truck Dr. Registered User Join Date: Oct 2009 Location: Rio Rancho NM Posts: 74	Re: Fuel injection for in line 6 292, from what I have seen, this site has just about any type of system covered TBI, MPFI and so on, they have custom apps as well. but for your Q, Both, with and without. Here is the homepage They also have adapter plates for a inline 6 stock manifold, just an all around good source I think, hope others chime in on this site with any experience with them. Dave __________________ Dave & Marilyn in Rio Rancho NM....1967 Chevrolet C-10 long step side.....250 3 spd. ..... 1968 Chevrolet C-10 long step side.....325 hp 350 4spd.....3" Exhaust....etc. 1965 Chevrolet Suburban K-10....292 4spd....cam....etc. Bow Tie Baby

11-22-2009, 07:40 PM	#17
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Fuel injection for in line 6 I've thought about this also.I think the trick would be to get a manifold like the Offy and have an adapter built for it.Then all the stuff from a 4.3 should be right in the ballpark.Factory TBI with almost all factory stuff that is available anywhere. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

03-24-2013, 12:30 PM	#18
Bigru Registered User Join Date: Mar 2013 Location: Missouri City, Tx Posts: 321	Re: Fuel injection for in line 6 Hey guys, since a few year has went by since someone posted to this thread. Who has the best set up for fuel injection? Or what's the best route to take to convert to FI? Btw, I have a 292 6 cylinder. Posted via Mobile Device



Register or Log In To remove these advertisements.

03-24-2013, 02:05 PM	#19
woodwright Enjoying left field Join Date: Jun 2008 Location: Dillon Montana Posts: 900	Re: Fuel injection for in line 6 Megasquirt is still gonna be the cheapest way to go. I'm doing this on my 250 in my Nova __________________ Clint 70 Chevy 4WD "Ultimate Work Truck" SOLD

03-24-2013, 02:33 PM	#21
woodwright Enjoying left field Join Date: Jun 2008 Location: Dillon Montana Posts: 900	Re: Fuel injection for in line 6 Go to www.diyautotune.com . little easier to wade through. __________________ Clint 70 Chevy 4WD "Ultimate Work Truck" SOLD

03-24-2013, 11:23 PM	#22
mjensen Registered User Join Date: Jun 2006 Location: Utah Posts: 1,562	Re: Fuel injection for in line 6 I still have to go with the megasquirt too! It really was a fun project that ran pretty well on the VW we put it on. __________________ Mike '69 GMC 3/4 ton 4x4 Build Thread

03-24-2013, 11:56 PM	#23
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: Fuel injection for in line 6 If you have the time to work through it here is an interesting blog where a guy converted his I-6 67 G van to FI and 4X4. http://bnoble.users.sonic.net/wordpr...n-is-complete/ Attached Images __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

12-03-2013, 03:24 PM	#24
kieth Registered User Join Date: Sep 2010 Location: Tulsa, Oklahoma Posts: 1,925	Re: Fuel injection for in line 6 Here is a link for a 4.3 litre v6 tbi conversion to a 292 http://www.67-72chevytrucks.com/vboa...fuel+injection in later parts of the thread he says he will post details on stovebolt.com website...good luck

12-03-2013, 05:16 PM	#25
MARKDTN Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 2,159	Re: Fuel injection for in line 6 http://howellefi.com/gm-tbi-products...-tbi-kits.html I have used their TPI stuff and it is top notch. __________________ '83 K20-TPI '73 C10 '79 C10-ex-diesel(SOLD) '07 Tahoe(Son driving) '14 Suburban-DD '71 C10-current project

Register or Log In To remove these advertisements.