OK Nos 71-72 ball joints, tie rods 1/2 ton disc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MoreLoveThanMoney · 10-08-2012, 09:11 PM

For Sale
New Old Stock Ball Joints for 71-72 1/2 ton with Disc Brakes #3997409 $20 ea plus shipping. I have 8 total Includes all Hardware

New Old Stock Tie Rod Ends for 71-72 1/2 ton with Disc Brakes $15 ea plus shipping. These do not include the castle nut or pin

**ScottH** · 10-08-2012, 09:22 PM

Interested on a set of upper & lower ball joints if available
also do u have inner & outer ends? Need both

Thanks
Posted via Mobile Device

MoreLoveThanMoney · 10-08-2012, 09:43 PM

Quote:

Originally Posted by ScottH

Interested on a set of upper & lower ball joints if available
also do u have inner & outer ends? Need both

Thanks
Posted via Mobile Device

All I have is what you see pictured. I believe the part number for the ball joint is the lower. I wish I had a complete set.

**lolife99** · 10-09-2012, 09:34 PM

Quote:

Originally Posted by MoreLoveThanMoney

All I have is what you see pictured. I believe the part number for the ball joint is the lower. I wish I had a complete set.

These are UPPER balljoints in your pictures,... but I have no idea if they are the correct part number for 71-72.
Is there any way to verify this before you sell these?

**70cst** · 10-09-2012, 09:45 PM

MoreLoveThanMoney...

You might want to double check these parts for verification. I have sold some parts and I descibed them wrong... I got everything straightened out but the process of reshipping the parts back and forth was a pain in the but.

Best of luck.

**ScottH** · 10-08-2012, 11:19 PM

ok, lmk what 2 of each will run shipped to 08753

thanks

**FL71C10** · 10-08-2012, 11:29 PM

I'll take one ball joint pending shipped cost to 32803, commercial address. That looks like an upper ball joint.

Thanks!

MoreLoveThanMoney · 10-09-2012, 10:30 AM

Quote:

Originally Posted by FL71C10

I'll take one ball joint pending shipped cost to 32803, commercial address. That looks like an upper ball joint.

Thanks!

27.50 total shipped for one

**FL71C10** · 10-09-2012, 07:21 PM

OK, I'll take one. Is a money order ok?

Quote:

Originally Posted by MoreLoveThanMoney

27.50 total shipped for one

**zicc1835** · 10-09-2012, 12:17 AM

Quote:

Originally Posted by ScottH

ok, lmk what 2 of each will run shipped to 08753

thanks

Scott if it makes cent$ can i hitch a ride and get 2 also put 4 in one box split the ship if it makes cent$ if MoreLove will do it ....LMK
Jess

MoreLoveThanMoney · 10-09-2012, 10:29 AM

Quote:

Originally Posted by zicc1835

Scott if it makes cent$ can i hitch a ride and get 2 also put 4 in one box split the ship if it makes cent$ if MoreLove will do it ....LMK
Jess

If I ship 4, shipping looks like it would be $18. Just let me know what you guys want to do. Not much savings to do one box over two. I would do 25 ea shipped if you buy two or more

**zicc1835** · 10-09-2012, 04:35 PM

Quote:

Originally Posted by MoreLoveThanMoney

If I ship 4, shipping looks like it would be $18. Just let me know what you guys want to do. Not much savings to do one box over two. I would do 25 ea shipped if you buy two or more

ill take 2 to 07981 for 50. shipped send me the paypall info
thank you
Jess

**zicc1835** · 10-18-2012, 10:39 PM

Quote:

Originally Posted by zicc1835

ill take 2 to 07981 for 50. shipped send me the paypall info
thank you
Jess

received thank you

REEDS 72 · 10-09-2012, 05:02 PM

All take two of the lower ball joints.

**BIGJAKE97** · 10-09-2012, 05:03 PM

how many ball joints do you have available?

i'll take 2, maybe 4 if a friend decides he wants a pair.

-jake

**ScottH** · 10-09-2012, 06:32 PM

I'll just take the 2 ball joints shipped for $50.
Pls lmk payment info.

Thanks
Scott

capt68 · 10-09-2012, 07:36 PM

Quote:

Originally Posted by MoreLoveThanMoney

For Sale
New Old Stock Ball Joints for 71-72 1/2 ton with Disc Brakes #3997409 $20 ea plus shipping. I have 8 total Includes all Hardware

New Old Stock Tie Rod Ends for 71-72 1/2 ton with Disc Brakes $15 ea plus shipping. These do not include the castle nut or pin

How much for (2) upper ball joints and (2) tie rod ends, shipped to zip code 77435?

Thanks
Russell

MoreLoveThanMoney · 10-09-2012, 07:48 PM

Quote:

Originally Posted by capt68

How much for (2) upper ball joints and (2) tie rod ends, shipped to zip code 77435?

Thanks
Russell

Not sure if upper and lower joints are the same and from what Im finding the part number I have is the lower joint. If the number I have is what you are looking for, 2 ball joints and 2 tie rod ends shipped would be $80

MoreLoveThanMoney · 10-09-2012, 08:05 PM

OK guys we have a problem. I have 8 ball joints and request for 9 possibly 11. Also, if it helps, I do have one more ball joint that I did not list. It does not have a number on it but the #3997409 joint is on the right in the pic which I believe to be lower and the one on the left Im not sure what it goes to.
ZICC1835
REEDS72
BIGJAKE97
SCOTTH
You guys said "Ill Take" first but FL71C10 said it first pending shipping but confirmed later than the other 4. Im lost now as to who gets what.
BigJake would you take one if FL71 wants one for sure since you were last in?

REEDS 72 · 10-09-2012, 09:25 PM

I think all pass on the ball joints thay look to be uper and I need lower thanks.

MoreLoveThanMoney · 10-09-2012, 10:04 PM

I have tried to verify whether they are upper or lower but I do not have anything to go off of other than the part number on the box. When I google the number everything I find says lower. I have never changed ball joints on one of these trucks so I don't have any personal experience with the difference between upper and lower. I just had a box of NOS parts that weren't doing me any good on the shelf so I was just trying to get these parts available to guys that can use them. I wish I had more info to be more accurate. I'm open to suggestions of a verification process of somebody has one.
Posted via Mobile Device

**70cst** · 10-09-2012, 10:12 PM

Quote:

Originally Posted by MoreLoveThanMoney

I have tried to verify whether they are upper or lower but I do not have anything to go off of other than the part number on the box. When I google the number everything I find says lower. I have never changed ball joints on one of these trucks so I don't have any personal experience with the difference between upper and lower. I just had a box of NOS parts that weren't doing me any good on the shelf so I was just trying to get these parts available to guys that can use them. I wish I had more info to be more accurate. I'm open to suggestions of a verification process of somebody has one.
Posted via Mobile Device

Here is an idea for you that might help.
If you have a part and are not sure what it is...post a picture in the 67-72 Message Forum and ask... I bet you will get the answers you seek. Best of luck.

MoreLoveThanMoney · 10-09-2012, 10:13 PM

Maybe this will help. Tried to show center to center on mounting holes.

MoreLoveThanMoney · 10-09-2012, 10:17 PM

I have 6 of these left at this time. ZICC1835 has purchased 2

**lolife99** · 10-10-2012, 07:57 AM

They are definitely UPPER ball joints.
Lower ball joints press in.
The upper ball joints bolt in.

10-08-2012, 09:11 PM	#1
MoreLoveThanMoney Registered User Join Date: Nov 2010 Location: Oklahoma City, Ok Posts: 438	Nos 71-72 ball joints, tie rods 1/2 ton disc For Sale New Old Stock Ball Joints for 71-72 1/2 ton with Disc Brakes #3997409 $20 ea plus shipping. I have 8 total Includes all Hardware New Old Stock Tie Rod Ends for 71-72 1/2 ton with Disc Brakes $15 ea plus shipping. These do not include the castle nut or pin Attached Images

10-08-2012, 09:22 PM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Nos 71-72 ball joints, tie rods 1/2 ton disc Interested on a set of upper & lower ball joints if available also do u have inner & outer ends? Need both Thanks Posted via Mobile Device __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-09-2012, 09:45 PM	#5
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,375	Re: Nos 71-72 ball joints, tie rods 1/2 ton disc MoreLoveThanMoney... You might want to double check these parts for verification. I have sold some parts and I descibed them wrong... I got everything straightened out but the process of reshipping the parts back and forth was a pain in the but. Best of luck. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

10-08-2012, 11:19 PM	#6
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Nos 71-72 ball joints, tie rods 1/2 ton disc ok, lmk what 2 of each will run shipped to 08753 thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-08-2012, 11:29 PM	#7
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: Nos 71-72 ball joints, tie rods 1/2 ton disc I'll take one ball joint pending shipped cost to 32803, commercial address. That looks like an upper ball joint. Thanks! __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

10-09-2012, 05:02 PM	#14
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: Nos 71-72 ball joints, tie rods 1/2 ton disc All take two of the lower ball joints.

10-09-2012, 05:03 PM	#15
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: Nos 71-72 ball joints, tie rods 1/2 ton disc how many ball joints do you have available? i'll take 2, maybe 4 if a friend decides he wants a pair. -jake __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

10-09-2012, 06:32 PM	#16
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Nos 71-72 ball joints, tie rods 1/2 ton disc I'll just take the 2 ball joints shipped for $50. Pls lmk payment info. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-09-2012, 08:05 PM	#19
MoreLoveThanMoney Registered User Join Date: Nov 2010 Location: Oklahoma City, Ok Posts: 438	Re: Nos 71-72 ball joints, tie rods 1/2 ton disc OK guys we have a problem. I have 8 ball joints and request for 9 possibly 11. Also, if it helps, I do have one more ball joint that I did not list. It does not have a number on it but the #3997409 joint is on the right in the pic which I believe to be lower and the one on the left Im not sure what it goes to. ZICC1835 REEDS72 BIGJAKE97 SCOTTH You guys said "Ill Take" first but FL71C10 said it first pending shipping but confirmed later than the other 4. Im lost now as to who gets what. BigJake would you take one if FL71 wants one for sure since you were last in? Attached Images

10-09-2012, 09:25 PM	#20
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: Nos 71-72 ball joints, tie rods 1/2 ton disc I think all pass on the ball joints thay look to be uper and I need lower thanks.

10-09-2012, 10:04 PM	#21
MoreLoveThanMoney Registered User Join Date: Nov 2010 Location: Oklahoma City, Ok Posts: 438	Re: Nos 71-72 ball joints, tie rods 1/2 ton disc I have tried to verify whether they are upper or lower but I do not have anything to go off of other than the part number on the box. When I google the number everything I find says lower. I have never changed ball joints on one of these trucks so I don't have any personal experience with the difference between upper and lower. I just had a box of NOS parts that weren't doing me any good on the shelf so I was just trying to get these parts available to guys that can use them. I wish I had more info to be more accurate. I'm open to suggestions of a verification process of somebody has one. Posted via Mobile Device

10-09-2012, 10:13 PM	#23
MoreLoveThanMoney Registered User Join Date: Nov 2010 Location: Oklahoma City, Ok Posts: 438	Re: Nos 71-72 ball joints, tie rods 1/2 ton disc Maybe this will help. Tried to show center to center on mounting holes. Attached Images

10-09-2012, 10:17 PM	#24
MoreLoveThanMoney Registered User Join Date: Nov 2010 Location: Oklahoma City, Ok Posts: 438	Re: Nos 71-72 ball joints, tie rods 1/2 ton disc I have 6 of these left at this time. ZICC1835 has purchased 2

10-10-2012, 07:57 AM	#25
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Nos 71-72 ball joints, tie rods 1/2 ton disc They are definitely UPPER ball joints. Lower ball joints press in. The upper ball joints bolt in. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.