84 Guage cluster with TACH!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

davidh · 11-12-2007, 12:35 PM

I cut the plug behind the dash so it can be wired for the tach. I've seen fewer of these than ones for 67-72. Could use some clean up but these are really rare. $140 and $10 to ship it.

whiskeydented · 11-12-2007, 08:47 PM

Is the mounting tab on the left hand side intact?

**crossy** · 11-12-2007, 09:15 PM

hey fellas, i'm not tryig to take anything away from davidh cause it's a afair price, but always look at that lower cable guide for the gear indicator if you have an automatic. notice this one is broken and there is nothing permanent you can do to fix that. You have to find another way route for your cable.
whiskey- good catch on the left tab, a lot of people on ebay purposely dont show that ,BUT that left tab doesn't mean a whole lot. the way the lower part of the cluster tucks in behind the metal dash does not allow the cluster to move around a lot. You can also make a small metal tab bent 90* and screw it to the side of the plastic if you really want to. the tabs to worry about are the top two towers. they are the ones that are a real pain to fix if they are broken and they hold the gauge bezel on.
Tachs are very easy to test at home also. expensive to repair though if bad. crossy

spudz · 11-12-2007, 09:30 PM

give ya 75 shipped.....

davidh · 11-12-2007, 11:20 PM

I will keep it as a converasation piece before I sell it for $75

davidh · 11-12-2007, 11:22 PM

You can get the back white shell part from LMC I believe then all the outer broken parts are fixed

GMC69 · 11-13-2007, 11:21 AM

Without tearing into mine, does anyone know if the speedo can be swapped out pretty easily on those? Since mine is in KM/h. It's no major issue to have it in MPH, but still.

Also in my truck I do not have the gear indicator either, so to me it's no major issue.

davidh · 11-13-2007, 11:50 AM

yeah, not hard to change them out. I've done it with gas guages before.

11-12-2007, 12:35 PM	#1
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,221	84 Guage cluster with TACH!!!! I cut the plug behind the dash so it can be wired for the tach. I've seen fewer of these than ones for 67-72. Could use some clean up but these are really rare. $140 and $10 to ship it. Attached Images __________________ Even the nicest dodge-chrysler is only 2years away from being parked outside of Section 8 housing.

11-12-2007, 08:47 PM	#2
whiskeydented Registered User Join Date: Dec 2006 Location: connecticut Posts: 261	Re: 84 Guage cluster with TACH!!!! Is the mounting tab on the left hand side intact?

11-12-2007, 09:15 PM	#3
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: 84 Guage cluster with TACH!!!! hey fellas, i'm not tryig to take anything away from davidh cause it's a afair price, but always look at that lower cable guide for the gear indicator if you have an automatic. notice this one is broken and there is nothing permanent you can do to fix that. You have to find another way route for your cable. whiskey- good catch on the left tab, a lot of people on ebay purposely dont show that ,BUT that left tab doesn't mean a whole lot. the way the lower part of the cluster tucks in behind the metal dash does not allow the cluster to move around a lot. You can also make a small metal tab bent 90* and screw it to the side of the plastic if you really want to. the tabs to worry about are the top two towers. they are the ones that are a real pain to fix if they are broken and they hold the gauge bezel on. Tachs are very easy to test at home also. expensive to repair though if bad. crossy __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. Last edited by crossy; 11-12-2007 at 09:16 PM.

11-12-2007, 09:30 PM	#4
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: 84 Guage cluster with TACH!!!! give ya 75 shipped..... __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

11-12-2007, 11:20 PM	#5
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,221	Re: 84 Guage cluster with TACH!!!! I will keep it as a converasation piece before I sell it for $75 __________________ Even the nicest dodge-chrysler is only 2years away from being parked outside of Section 8 housing.

11-12-2007, 11:22 PM	#6
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,221	Re: 84 Guage cluster with TACH!!!! You can get the back white shell part from LMC I believe then all the outer broken parts are fixed __________________ Even the nicest dodge-chrysler is only 2years away from being parked outside of Section 8 housing.

11-13-2007, 11:21 AM	#7
GMC69 Registered User Join Date: Jul 2003 Location: Sudbury, Ontario, Canada Posts: 734	Re: 84 Guage cluster with TACH!!!! Without tearing into mine, does anyone know if the speedo can be swapped out pretty easily on those? Since mine is in KM/h. It's no major issue to have it in MPH, but still. Also in my truck I do not have the gear indicator either, so to me it's no major issue. __________________ Mike Email: Click here to email me -- 2019 Silvedrado 4x4 1970 Chevy 3/4 ton, 396BB, on air bags

11-13-2007, 11:50 AM	#8
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,221	Re: 84 Guage cluster with TACH!!!! yeah, not hard to change them out. I've done it with gas guages before. __________________ Even the nicest dodge-chrysler is only 2years away from being parked outside of Section 8 housing.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.