![]() |
|
![]() |
#1 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
MY build thread...
OK well It could take a while but it finally got started so here are some pics.
1965 swb,3.73 posi,361sbc\91 700r4. Heres some when I brought it home and some progress yesterday.
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 Last edited by shortbed70; 07-13-2010 at 06:05 PM. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
Heres some of some other work besides putting my wheels on it. The door gaps are good a little wide for me maybe I'll fix later. Hood seam going byby. My motors almost done and lastly saving myself 150.00 on a new core support. This is going to be done on a SCARCE budget.
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 Last edited by shortbed70; 03-10-2009 at 09:59 PM. |
![]() |
![]() |
![]() |
#3 |
Keep It Simple Stupid.. Nope..
Join Date: Jan 2009
Location: Live Oak, FL
Posts: 665
|
Re: MY build thread...
Not bad man. Now get that rust off and seal it with some etching primer! Good looking engine. What color are you going to use?
__________________
1963 GMC SWB Fleetside in Sunburst Orange Metallic 305E V6 w/ Plaid VC, Powerglide, BOSS 313 20" Chrome Wheels, Kumho Ecsta STX 275/45/R20's, Alpine/Clarion System, Dynomax Exhaust Old custom classic trucks have soul. Their dashboards aren't plastic, and they've survived both the best and worst of what the 20th century had to offer. For the owners of these trucks, it's often the same story. Through both good and bad times they persevered, until one day they could turn the key and roll up in a customized truck everyone with good taste would admire. – Custom Classic Trucks |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jan 2009
Location: bean station tennessee
Posts: 398
|
Re: MY build thread...
looks like a clean truck to me.good looking builder.good luck on your project.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
Well I have a 65 thats in my photo but when I tore it apart in september last year WOW was I surprised with all the ROT, so I bought this 64 and WOW was I surprised how straight and rust free it was. I am going to hand strip the spots this guy mudded and use a stud gun to lessen the amount of bondo used and I have to put two cab corner sections on but thats it for rust. As for color it is going to be something like whats on the cadillac sports car kind of a candy red close to the color on the motor. I cant wait to get this thing running. I've always wanted my own build thread,Thanks to all on the board that have theres going to inspire me. Heres some pics of the old truck\donor now.
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
![]() |
![]() |
![]() |
#6 |
Keep It Simple Stupid.. Nope..
Join Date: Jan 2009
Location: Live Oak, FL
Posts: 665
|
Re: MY build thread...
It doesn't sound like too bad of a rust issue though. Looking forward to watching the build up.
__________________
1963 GMC SWB Fleetside in Sunburst Orange Metallic 305E V6 w/ Plaid VC, Powerglide, BOSS 313 20" Chrome Wheels, Kumho Ecsta STX 275/45/R20's, Alpine/Clarion System, Dynomax Exhaust Old custom classic trucks have soul. Their dashboards aren't plastic, and they've survived both the best and worst of what the 20th century had to offer. For the owners of these trucks, it's often the same story. Through both good and bad times they persevered, until one day they could turn the key and roll up in a customized truck everyone with good taste would admire. – Custom Classic Trucks |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
My 65(the red truck) is the basket case the gray and blue truck is getting donor parts from the red truck. Thanks for the encouragement guys hopefully this weekend when it warms up I can get more done.
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
![]() |
![]() |
![]() |
#8 |
Resistance is Futile
Join Date: Dec 2006
Location: Mesa,Arizona
Posts: 3,520
|
Re: MY build thread...
Cool to see it get started...post up your progress.
![]()
__________________
64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device |
![]() |
![]() |
![]() |
#9 |
1962 C-10
Join Date: Apr 2005
Location: Las Vegas, New Mexico
Posts: 4,978
|
Re: MY build thread...
Looking good! Can't wait to see this one come together. Keep us posted...
__________________
Joseph Chavez ![]() "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4 |
![]() |
![]() |
![]() |
#10 |
chevy only
![]() Join Date: Sep 2006
Location: Phoenix, AZ
Posts: 6,619
|
Re: MY build thread...
nice start, and nice bullet(motor)
__________________
CHEVY ONLY... Nothin Else ! |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
Heres some stuff I did tonight, Hood seam gone,all my wheels on it, and rad core finished.
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
![]() |
![]() |
![]() |
#12 |
1 thing at a time is progress.
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
|
Re: MY build thread...
Nice work. Can't wait for more progress!!
__________________
Alan
Philippians 2:14-16 |
![]() |
![]() |
![]() |
#13 |
Resistance is Futile
Join Date: Dec 2006
Location: Mesa,Arizona
Posts: 3,520
|
Re: MY build thread...
Ok, to be clear....you are using the old truck for parts? That sucks you had to do that but in the long run it could be better.
Nice lighting in the shop ![]()
__________________
64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
Well kind of recycling and trading, like the core support I fixed came off the 65(red one) and will be used on the 64(gray/blue) and the cowl panel will be used from 65 to 64. I might be selling the 65 to my father in law who still thinks he can build it for what it cost in the late 70's but he wants it anyway so I cant turn down money plus I know I can fix it if someone else pays for it plus it would be nice to see it stay close. Thanks for the comments and a word of advise to anyone wanting to weld the seam on the hood, be patient it takes a long time...
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 Last edited by shortbed70; 03-13-2009 at 11:24 PM. |
![]() |
![]() |
![]() |
#15 |
Resistance is Futile
Join Date: Dec 2006
Location: Mesa,Arizona
Posts: 3,520
|
Re: MY build thread...
Gotchya.....I remember when you started tearing into the original truck and found all the rot. The pics with the wheels on the new one confused me; I thought you put your new cab on the old frame. Did you get your engine assembled? I read all the roller stuff you were asking about over in the engine section.
__________________
64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
Yes the engine is done for the most part just have to put new pan and timing cover on and shes done. It doesn't have the roller cam I wanted so I stuck with the hydraulic that was in it. Well this truck was too good to take apart so I will be keeping it togather and the other truck will be parted or I might sell to my father in law if he can come up with the money. If you've seen the other posts then you know some of the rust issues that we all know usually go deeper than they look. Some day if I feel good I will put the pan and timing cover on the motor and bag it up but for now it sets dormant. Today I brought another load of crap home after about 2 hrs of fighting frozen brakes and flat tires and soft ground its on the trailer. I will get pics tomarrow of the other bed for the 64 that might be for sale???
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
![]() |
![]() |
![]() |
#17 |
Resistance is Futile
Join Date: Dec 2006
Location: Mesa,Arizona
Posts: 3,520
|
Re: MY build thread...
Hey, I just saw a zinc additive you can get for flat tappet break-in to protect those cams. I think alot of people were mentioning problems with flattening lobes. Cant wait to see it all come together.
__________________
64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device |
![]() |
![]() |
![]() |
#18 |
1 thing at a time is progress.
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
|
Re: MY build thread...
I haven't done the hood yet, but the bedside took some time. I thought since the metal was thicker I could stay on it a little longer....not true I had a little distortion. So, yes be patient.
__________________
Alan
Philippians 2:14-16 |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
Well the cam was broke in years ago. This wasn't a complete rebuild because the motor ihas very low miles since I bought it new in the truck. Heres some pics from what I got yesterday. All but the bed is going to scrap monday evening.
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
![]() |
![]() |
![]() |
#20 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: MY build thread...
Looks like there is quite a bit of useable parts there that someone could use. It would be a shame to see it go to the scrap yard. Have you thought about posting it in the classifieds here?
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#21 |
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: MY build thread...
Great looking project!
__________________
-Nate ![]() 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
Not much progress lately but I almost got the motor ready to run just need starter,wp,balancer,valve covers and plugs then I'll have a video. Also got the motor in my 64 running so I can sell it to recoupe some money. Heres some pics of motor....More to come soon. Might have the old truck sold too. And I got to ride my first harley today and MAN now I want one. Spacer is for hood clearence checking...
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 Last edited by shortbed70; 03-22-2009 at 07:17 PM. |
![]() |
![]() |
![]() |
#23 |
Sunburst C10!!!
Join Date: Jan 2009
Location: Texas
Posts: 2,560
|
Re: MY build thread...
is that a 4 inch carb spacer
__________________
Gage 1967 C10 Shortbed Stepside |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
It a 2" phenolic 4 hole spacer and a demon carb. The air cleaner hits the bottom of the cowl vent.
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
![]() |
![]() |
![]() |
#25 |
Sunburst C10!!!
Join Date: Jan 2009
Location: Texas
Posts: 2,560
|
Re: MY build thread...
i didnt know 2 inch spacers were that big i have a 1 inch spacer
__________________
Gage 1967 C10 Shortbed Stepside |
![]() |
![]() |
![]() |
Bookmarks |
|
|