Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
12-26-2023, 11:56 PM | #1 |
Registered User
Join Date: Jun 2012
Location: Rathdrum, Idaho
Posts: 305
|
Oil Filter adapter issue
Okay, so another riddle. 1965 C20 with a stock 283. I am looking for an oil filter adapter to convert to a spin on. I bought a transdapt adaptor 1024 that didn't fit. Then I went to NAPA and bought a Mr. Gasket that didn't fit. Both kits came with bolts that were to small to mount to the block. Pics attached are the block and the part I removed. To the left is the stock bolt ( the larger one)and then the one they supplied. Any ideas?
|
12-27-2023, 12:27 AM | #2 |
Senior Member
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,483
|
Re: Oil Filter adapter issue
If the only issue is the bolt size for fitting the adapter, maybe you could get away with just drilling out the holes on the adapter to fit the original size bolts?
Another option would be finding a heli-coil that screws into the original bolt hole and accepts the smaller bolt from the adapter kit.
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
12-27-2023, 10:17 AM | #3 |
Active Member
Join Date: Nov 2019
Location: SE WI
Posts: 120
|
Re: Oil Filter adapter issue
I had some sealing issues with the adapter the PO installed on my 283 and went with this one from Speedway.
https://www.speedwaymotors.com/1956-...pter,1159.html |
12-27-2023, 11:10 AM | #4 |
Luchador
Join Date: Mar 2019
Location: ATL, GA
Posts: 55
|
Re: Oil Filter adapter issue
I also bought the unit from Speedway and it fit great with no issues
|
Bookmarks |
|
|