Complete cab floors ready to ship - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jb4short · 02-27-2008, 09:40 PM

'67-'72 complete cab floors (low hump) are now in stock and ready to ship. 479.00 +S/H.

72swbcamo · 02-28-2008, 03:46 AM

Tri-Pro, do you have Rear Step Side Steel Fenders. If so how much?

jb4short · 02-28-2008, 03:15 PM

Quote:

Originally Posted by 72swbcamo

Tri-Pro, do you have Rear Step Side Steel Fenders. If so how much?

Yes we do. Do you want to pick them up? Waterbury isn't that bad a drive.

**special-K** · 02-28-2008, 03:49 PM

YAY!!!No more Fred & Barney spin-outs!

jb4short · 02-28-2008, 05:37 PM

Quote:

Originally Posted by special-K

YAY!!!No more Fred & Barney spin-outs!

My father has spent decades perfecting the cardboard and oil floorboard

**jaros44sr** · 02-28-2008, 07:39 PM

Sure Jon, you waited to release this till I hung my last rocker so I wouldn't attempt to put the full floorboard in my Jimmy!

I hope you have one left for yourself

jb4short · 02-28-2008, 10:12 PM

Quote:

Originally Posted by jaros44sr

Sure Jon, you waited to release this till I hung my last rocker so I wouldn't attempt to put the full floorboard in my Jimmy!

I hope you have one left for yourself

You're welcome to come practice the install on mine (Trade for parts?)

**jaros44sr** · 02-28-2008, 10:37 PM

Quote:

Originally Posted by Tri-ProAutomotive

You're welcome to come practice the install on mine (Trade for parts?)

Is the other guy still coming? or is it up to me? Better get some new body mounts....Got heat?

jb4short · 03-08-2008, 05:09 PM

TTT.....plenty in stock!

72BlckButy · 03-09-2008, 04:59 AM

Hey Jon... what do you think of the quality of the floor? Is it a pretty thick guage of metal?

**jaros44sr** · 03-09-2008, 05:24 AM

^^^, Jon how thick is the metal???

DavesRide · 03-09-2008, 07:22 AM

Hey 72BlckButy, You got the same MO problem with floor. Id bet my driver is worse than yours. Lets talk about it in person.

DavesRide · 03-09-2008, 10:22 PM

Quote:

Originally Posted by DavesRide

Hey 72BlckButy, You got the same MO problem with floor. Id bet my driver is worse than yours. Lets talk about it in person.

Ok, I would bet $5.00. My truck is liscened drivable but very scary thoughts cross my mind while driving. The gas tank is on the frame and barely a trace of cab mounts is left. I think the steering column and the fuel lines are the only thing holding it in place. Yes lets get together and have a little MO RUST SHOW. My truck actually came from Iowa and was won in a bet from the PO I bought it from. I got about 400 in it currently so I am not ashamed when a piece falls off when I am driving it. I will PM you so we can compare ideas. David

jb4short · 03-19-2008, 04:34 PM

Here are some better shots of the floor

72BlckButy · 03-09-2008, 11:31 AM

DavesRide, sounds good to me... I was actually in Boonville on Thursday. Pm me sometime.

My floor isn't a complete basket case, but it needs some work, so if the complete floor is a good deal I might as well go with that, but we'll see how it goes...

jb4short · 03-09-2008, 07:29 PM

I'll mic it but it's pretty heavy duty....the shipping weight of the floor and cardboard box (no pallet) is 123lbs.

**lks dcvn** · 03-19-2008, 05:32 PM

You guys need a donor vehicle to try an install on?

Can't wait to see the 'how-to' on this one!

**jaros44sr** · 03-19-2008, 06:07 PM

sure looks like it will fit a Jimmy, with a little mod. work! What are those bracing things on the rear of the center hump for???

jb4short · 03-19-2008, 06:14 PM

Quote:

Originally Posted by jaros44sr

sure looks like it will fit a Jimmy, with a little mod. work! What are those bracing things on the rear of the center hump for???

the squiggly ribs? I don't know. They appear on one of the two cabs I have here (factory) but not on the other. They were (obviously) on the sample that was sent to Taiwan but there doesn't seem to be any rhyme nor reason for them.

Anyone?

**jaros44sr** · 03-19-2008, 06:22 PM

Special Agent K?He knows all and sees all....J.

jb4short · 03-19-2008, 06:26 PM

Quote:

Originally Posted by jaros44sr

Special Agent K?He knows all and sees all....J.

I invited Special Agent "K" to come play with the one here (offer you moral support....LOL)

DavesRide · 03-19-2008, 09:27 PM

I'm saving cash as we speak. The pictures clear up my questions. Mine is missing everything. I'll keep in touch.

02-27-2008, 09:40 PM	#1
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Complete cab floors ready to ship '67-'72 complete cab floors (low hump) are now in stock and ready to ship. 479.00 +S/H.

02-28-2008, 03:46 AM	#2
72swbcamo Active Member Join Date: Dec 2003 Location: Waterbury, CT Posts: 591	Re: Complete cab floors ready to ship Tri-Pro, do you have Rear Step Side Steel Fenders. If so how much?

02-28-2008, 03:49 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Complete cab floors ready to ship YAY!!!No more Fred & Barney spin-outs! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-28-2008, 07:39 PM	#6
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,694	Re: Complete cab floors ready to ship Sure Jon, you waited to release this till I hung my last rocker so I wouldn't attempt to put the full floorboard in my Jimmy! I hope you have one left for yourself __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-08-2008, 05:09 PM	#9
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: Complete cab floors ready to ship TTT.....plenty in stock!

03-09-2008, 04:59 AM	#10
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Complete cab floors ready to ship Hey Jon... what do you think of the quality of the floor? Is it a pretty thick guage of metal? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

03-09-2008, 05:24 AM	#11
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,694	Re: Complete cab floors ready to ship ^^^, Jon how thick is the metal??? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-09-2008, 07:22 AM	#12
DavesRide Registered User Join Date: Oct 2007 Location: Garageless, Missouri Posts: 408	Re: Complete cab floors ready to ship Hey 72BlckButy, You got the same MO problem with floor. Id bet my driver is worse than yours. Lets talk about it in person. __________________ R.I.P ESLL Even as the body dies the spirit lives on in the people you touched

03-19-2008, 04:34 PM	#14
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: Complete cab floors ready to ship Here are some better shots of the floor

03-09-2008, 11:31 AM	#15
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Complete cab floors ready to ship DavesRide, sounds good to me... I was actually in Boonville on Thursday. Pm me sometime. My floor isn't a complete basket case, but it needs some work, so if the complete floor is a good deal I might as well go with that, but we'll see how it goes... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

03-09-2008, 07:29 PM	#16
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: Complete cab floors ready to ship I'll mic it but it's pretty heavy duty....the shipping weight of the floor and cardboard box (no pallet) is 123lbs.

03-19-2008, 05:32 PM	#17
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,346	Re: Complete cab floors ready to ship You guys need a donor vehicle to try an install on? Can't wait to see the 'how-to' on this one!

03-19-2008, 06:07 PM	#18
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,694	Re: Complete cab floors ready to ship sure looks like it will fit a Jimmy, with a little mod. work! What are those bracing things on the rear of the center hump for??? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-19-2008, 06:22 PM	#20
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,694	Re: Complete cab floors ready to ship Special Agent K?He knows all and sees all....J. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-19-2008, 09:27 PM	#22
DavesRide Registered User Join Date: Oct 2007 Location: Garageless, Missouri Posts: 408	Re: Complete cab floors ready to ship I'm saving cash as we speak. The pictures clear up my questions. Mine is missing everything. I'll keep in touch. __________________ R.I.P ESLL Even as the body dies the spirit lives on in the people you touched



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.