How about some pics of 88-98 Trucks

[N2TRUX]

Ok guys and gals it's been a while since we had roll call here and there are a lot of new members. Lets play the "post your 88-98 ride" game again. Show us your 88-98 trucks. Tell us what you have and what's in the near future for it, and show us your best pics.....

[1972C10]

Here's A Pic Of My New Project I plan on installing 3x3 angle iron bed rails Three tool boxes ladder rack and 15x8 rally wheels.
Gonna be Work Truck 9000

[bigarmzz]

here's my 88 GMC...got it lowered with 15" Boyd Coddington billet rims , lecarra billet steering wheel, candy flames, and 3" Harwood cowl induction hood.....

screamin 350/350hp motor, with TH350 tranny and 3:73 gears


-bigarmzz-
klambert@cebridge.net

[AnniesSS]

Here's my pride and joy


If you're interested.... here's a link to my mods

[PRUNEDA]

Here's my '89

[lowgrn1]

Here's a few pics of my 95. Before and after a few mods. Next mods are to shave the doors, shave the rear steps, and run airbags. Then custom two tone flames job. Oh and then color match the interior that has been sitting in my living room.

[bigarmzz]

Originally Posted by PRUNEDA

Here's my '89

man that is absolutely sweeeet

ya get tired of that baby, let me know


-bigarmzz-

[deanmonty]

Originally Posted by PRUNEDA

Here's my '89

Gorgeous!! good job!

[ChevyCruizer]

90 shortbed
bagged 4 link front upper and lower tubular arms
billet 94 grill with "no bowtie" grill
crystal lights
custom hood
shaved door handels, drip rail, antenna, tail lights, stake pockets
rear roll pan with slotted tail lights
over 1K in billet interior pieces
tweet interior with door panels that mirror pattern of exterior paint
bucket seats out of some sports car pattern matches tonneau cover
custom flames that extend into bed and on top of tonneau cover
huge stereo dvd
tiny 17's they were big when i bought them. 245/40/27 and 275/40/17
engine is slightly built headers, cam, chip, filter, but it is dirty
the list goes on and on

i am buying some 20's any day, but i need help with backspacing and tire size

future

chrome bumper with billet and 4 lights, the painted one keeps getting chipped
detail engine and engine bay
rihno coat bed floor

[91Sportside]

This is my new truck. I haven't seen it yet, I live overseas, my brother looked at it for me. It has 133k miles on it, 4.3 engine and the 5 speed transmission. I will be coming back to the States to live in February so will start working on it then. I am planning to replace the box with a Fleetside box and change the engine to a 350, if the transmission can take it.
Steve

[1972C10]

Originally Posted by 91Sportside

This is my new truck. I haven't seen it yet, I live overseas, my brother looked at it for me. It has 133k miles on it, 4.3 engine and the 5 speed transmission. I will be coming back to the States to live in February so will start working on it then. I am planning to replace the box with a Fleetside box and change the engine to a 350, if the transmission can take it.
Steve

Just dont plan on giving it a hard time with that 5 speed and a 350 ... There not known for being very strong.

[Kybol]

Here is a pic of my 90.

[Fry]

Just bought mine yesterday. Its a 99 and I guess its all stock. Not sure on the plans. Don't really want to lift it at all or do anything extreme. Would like to get a paintable grille with no bowtie and some clear corners then remove the mouldings, trim & emblems. Was going to buy some 285/75 truxus for it but no of the offroad shops had them in stock in the city so I guess I'll have to wait for a bit.

[454ss_2]

Here is my 92 454ss, for more pics and info check out my site http://www.m454ss.com

[dishow]

hi.these are has beens,but i figured I'd share anyway.My daily driver now is a F***!

89 & 97

[TBigLug]

Here's my baby's baby. 1996 K1500, 4X4, 350 Vortec, 5 sp. manual, 217,000 miles. Enjoy.

[69-350]

well, might as well throw some pictures up of my beast. She's my daily driver, much nicer truck in person than these pictures show, shoulda cleaned her up for these pics. Yes, I do consider that dirty for this truck, she's a DD and for me to drive wherever I need to (mud, gravel roads, hauling stuff like motors, wherever) but I do try and keep her washed up and shining, she gets washed at least once a week.

1997 K1500 Vortec 350, Ext. Cab Short Box Z71 (for some reason, seems like she sits higher than other Z71s, but that's okay with me!) no air dam, chrome rockers and chrome body line strips, chrome wheel well trim, decals on side, window visors, bench (woot!) aftermarket CD player, diamond plate toolbox, spray in bedliner, splash guards, aftermarket tailights/headlights, pushbar/offroad lights, dual pipes with 30" glasspacks 18"x3" tips (deep, mean sound that doesn't sound like it's drowning like a lot of 2.5" pipes w/ 18" packs sound like). Originally a Canadian truck, original owners used it to pull a 5th-wheel camper ( ) still has holes in the box for 5th wheel plate and hookup, second owner brought it here and had guages switched, third owner my brother, fourth owner is me. 127k miles as of now, still lots of power to turn that posi rear end, for a 5800lb truck.

[Pogwa]

My dads '95 GMC Sierra 3500.

- 129,000 miles
- 454, 7.4l
- 4.11 in the Rear End
- Dual Flowmasters

[Swed-Chevy]

Wow,how many nice cars to look at in this thread.Sending a couple of pics of mine.

[SiCk_DiAbLo]

Nice trucks in here...Mine is pretty much stock!

[glenn33]

Nothing fancy, but I sure do like her...

[Boneslammed91]

Here are some before and after pics of my 91.....

[82GMCShortBed]

Sold the 82 and picked up this 92 454SS. Got a few electrical bugs to fix, but much better project than what I had. Love that big block torque!

[68_c10_on20s]

a few from when i got the truck

[68_c10_on20s]

and a few more from where its at now and even some vid!

YouTube- truck 032.AVI