|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
04-16-2009, 11:21 AM
|
#1 |
|
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Project "Poison Ivy" 54 GMC
Well since my other trucks were built before I found this wonderful site I did not have build threads.. So today I am starting two...
I have been wanting an 47 to 54 truck for a while but kept buying 67 to 72's because of all the parts and knowledge I had.. Well it just so happened that I acquired a 98 S10 reg cab long bed.. It was my grandfathers truck, he passed in Feb and I ened up with it for FREE.. What a perfect opportunity to do a chassis swap...  So I started the search for a 47 to 54... I wanted a clean truck with good original patina... Yes I am on the shop truck/Rat sytle band wagon right now.. Probably because I enjoy my 64 shop truck more than any other car/truck I have ever owned.. Its a cool old ride that you don't have to worry about rain or leaving it in a parking lot at the store..Well my search turned up a 54 GMC... As soon as I had seen it I knew I had to have it... the truck sports an all original exterior right down to the lettering that is on the doors.. The GMC runs and drives great right now!! Almost ashame to rip it apart but I like technology and want to be able to roll down the highway 80 mph... The truck is super solid so when the shop truck thing dies off I have a good foundation for a show truck... Plans for now are to blow the S10 apart and start cleaning the frame... I am going to run drop spindles and bags in the front to start... Not sure about the rear yet but I am thinking a 3 link is soon to follow... I am leaving the 4.3 in the truck for now with the 4L60E... I will drive it like that for a while and build a small block with a tri power set up in the future.. Here are two pics of the GMC.. I want this to be done this summer.. Stay tuned for more..
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile Last edited by c10addict; 04-16-2009 at 11:24 AM. |
|
|
|
04-16-2009, 12:00 PM
|
#2 |
|
67-72 parts collector,…
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,700
|
Re: Project "Poison Ivy" 54 GMC
Subscribing to this one,...
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
|
|
|
|
04-16-2009, 12:52 PM
|
#3 |
|
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: Project "Poison Ivy" 54 GMC
Here are a few pics of the S10... The "Old Man" drove like he was in a demo derby the last few years of his life... He drove fast and hard.. No carbon issues with this one...
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
|
|
|
|
04-16-2009, 02:38 PM
|
#4 |
|
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: Project "Poison Ivy" 54 GMC
This is a perfect candidate for a swap.... subscribed!
The patina on that truck is amazing, and perfect!
__________________
-Nate  1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 04-16-2009 at 02:38 PM. |
|
|
|
|
04-16-2009, 08:26 PM
|
#5 |
|
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: Project "Poison Ivy" 54 GMC
Well I have to go pick up a race car chassis tomorrow at my powder coat guys place so I figured I would let him powder the wheels... I drove the 64 over to the garage where I am currently storing the 54 and pulled them off.. All I had was my cell phone to take pics with but I figured I would get a few side by side shots... Oh what a difference...I can not wait till the 54 sits like the 64... Back to the wheels.. The 54 has the factory 16" steelies.. I am going to run them at first.. I think it will look cool... As of now I am thinking powdering them an ivory or creamy white to match the lettering on the doors... What are your thoughts?? let me know..
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
|
|
|
|
04-16-2009, 08:36 PM
|
#6 |
|
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: Project "Poison Ivy" 54 GMC
Ok so for some reason I can not upload pics tonight... I will try again in the am....
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
|
|
|
|
04-16-2009, 08:54 PM
|
#7 |
|
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: Project "Poison Ivy" 54 GMC
now its workin... Bring on the crapy cell phone pics!!
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
|
|
|
|
04-16-2009, 10:37 PM
|
#8 |
|
VA72C10
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: Project "Poison Ivy" 54 GMC
I like the idea of matching the wheels to the lettering....I'd like to see some chrome rings or part caps on there though as I love a little bit of chrome...to go with the grille chrome...
__________________
Looking for a 67-72 swb or blazer project in or around VA. 
|
|
|
|
|
04-17-2009, 07:53 AM
|
#9 |
|
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: Project "Poison Ivy" 54 GMC
I plan on running the stock dog dish/hubcap... I just dismounted them this morning and realized the wheel is only 5.5" wide... thats cool for the front but I am going to call stockton wheel and see what they can offer for the rear...
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
|
|
|
|
04-19-2009, 03:56 PM
|
#10 |
|
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: Project "Poison Ivy" 54 GMC
Yesterday was a fun day... I went up my parents shop and put the S10 on the life outside.. In about 2 hours it looked like this..... I threw it on the trailer and brought it to my house so I can finish gutting the cab and start cleaning and bagging the frame... I took it around the neighborhood with it looking like this... Lol... My nieghbors think there is something wrong with me!
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
|
|
|
|
04-19-2009, 04:41 PM
|
#11 | |
|
VA72C10
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: Project "Poison Ivy" 54 GMC
Quote:
__________________
Looking for a 67-72 swb or blazer project in or around VA.
|
|
|
|
|
|
04-19-2009, 06:27 PM
|
#12 |
|
67-72 parts collector,…
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,700
|
Re: Project "Poison Ivy" 54 GMC
How do you plan to run the 6-lug stock wheels on the S10 chassis? Wheel adapters?
I have a buddy doing this same this to a '50 chevy. I just took him a 4x4 S10 rearend. The stock 2wd rearend is too narrow. (wheels will hit the bedsides) The 4x4 rearend is about 2" wider per side. Cool Project!
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
|
|
|
|
10-15-2011, 12:23 AM
|
#13 | |
|
Senior Member
Join Date: Aug 2008
Location: Cedar Park, Texas
Posts: 7,500
|
Re: Project "Poison Ivy" 54 GMC
Quote:
|
|
|
|
|
|
10-20-2011, 08:27 AM
|
#14 |
|
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: Project "Poison Ivy" 54 GMC
Im really getting close now... Gauges came yesterday and look pretty good in the factory dash, I will have the bumpers back from powder coat tomorrow and will build the brackets and get hung.. I cant stand it without the bumpers! I did a little cutting and got the back suspension down about an inch more.. I have to finish wiring some things and button up a bunch of little loose ends.. Leaving to make the trip to SEMA next week, back home then back to Scottsdale Goodguys.. If there is room in the hauler I would like to take it to Scottsdale.. Once we get home it will probably be snowing so Then I guess its time to get back on the 67 C10"Olive" thats been laying in my garage..
       
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
|
|
|
|
08-22-2009, 01:46 AM
|
#15 |
|
PROJECT 7DEUCE
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: Project "Poison Ivy" 54 GMC
Sweet cant wait to see her swapped..
__________________
GO BIG GREEN GO DUCKSMEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
|
|
|
|
08-22-2009, 10:44 AM
|
#16 |
|
low n' slo
Join Date: Mar 2009
Location: rosenberg, texas
Posts: 5,173
|
Re: Project "Poison Ivy" 54 GMC
nice project you got goin, so you baggin this one?
__________________
67 1/2 ton Suburban - Project DRGNWGN. Build thread  -_--_--_ _________ _--_-_ -/____|__|__\__ ,.,,,.,.,,.,|_O _______ O_] |
|
|
|
|
08-22-2009, 10:55 AM
|
#17 | |
|
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: Project "Poison Ivy" 54 GMC
Quote:
Bagged with dropped spindles up front and extensive metal works rear kit on its way...
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
|
|
|
|
|
08-23-2009, 04:29 PM
|
#18 |
|
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: Project "Poison Ivy" 54 GMC
So here are a few pics... Frame painted,front bagged, wheels and tires on, motor and tranny mostly wired... The rear air ride kit is on its way to me and will be next weeks project.. I cut apart an old oil bath air cleaner and put a regular filter in it to use as my air cleaner... I have to weld a bigger inlet on it and it will be done..
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
|
|
|
|
08-23-2009, 05:06 PM
|
#19 |
|
VA72C10
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: Project "Poison Ivy" 54 GMC
Nice progress. I like the idea of the air cleaner.
__________________
Looking for a 67-72 swb or blazer project in or around VA.
|
|
|
|
|
08-24-2009, 11:41 PM
|
#20 |
|
Registered User
Join Date: Jul 2009
Location: American Fork UT
Posts: 22
|
Re: Project "Poison Ivy" 54 GMC
subscribed
|
|
|
|
|
08-25-2009, 09:19 AM
|
#21 |
|
Under Construction
Join Date: Oct 2007
Location: Midlothian,TX (DFW)
Posts: 4,555
|
Re: Project "Poison Ivy" 54 GMC
looking good!
__________________
Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 |
|
|
|
|
08-25-2009, 05:13 PM
|
#22 |
|
Registered User
Join Date: Apr 2002
Location: Burlington, KY USA
Posts: 338
|
Re: Project "Poison Ivy" 54 GMC
Looks awesome. I would love to bag my 50 but just trying to get it one the road. Post pix of the swap, I am hoping to have mine done in a few weeks
__________________
"Get Busy Living or Get Busy Dying" 1970 P10 Stepvan |
|
|
|
|
08-26-2009, 01:24 PM
|
#23 |
|
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: Project "Poison Ivy" 54 GMC
Rear air ride kit came yesterday.. Let the cutting and welding begin!!
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
|
|
|
|
08-26-2009, 01:37 PM
|
#24 |
|
Retiredoldfarttankerguy
Join Date: Mar 2007
Location: Coeur d'Alene Idaho
Posts: 148
|
Re: Project "Poison Ivy" 54 GMC
You're my hero and patina partner - love the trucks! Have you ever discussed your favorite bag - components? and some of the costs associated? Sometimes you can save a little here and there - but need to spend the dough wisely - premium parts aren't always the highest priced! (but we know they often are) - subscribed.
__________________
________________________________ Swany Current 67-72 truck projo - #5 of 6 and #1,000,000... of all the other things that keep me from working on it. Fav - local parts shop. They ship world-wide. www.fillingstation.com |
|
|
|
|
08-26-2009, 02:12 PM
|
#25 | |
|
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: Project "Poison Ivy" 54 GMC
Quote:
The 64 has a Dropmember with ART control arms, KP notch with stock trailing arms. I am running manual valves in that truck.. I have a set of Big Red valves sitting but its hard to fix whats not broken. This truck also has two 3 gallon tanks and one compressor.. The 54 is going on the 97 S10 chassis.. Bags and drop spindels up front, Extensive metal works 2 link in the rear.. Couldn't beat the deal on the two link.. Not worth taking the time to build my own.. As I said this truck is pretty simple.. Keepin the 4.3 so I am not worried about the way it hooks up.. Just want it low.. I also have a set of Big Red valves for this truck as well.. The 67 is way on the back burner for now.. But I Z'd the frame 3 inches, cut an inch off of the front bag cups and run 2.5" drop spindles.. The rear is a KP notch and stock trailing arms.. Who knows what I will do with this truck for air management.. Any questions please hit me up!
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile Last edited by c10addict; 08-31-2009 at 10:32 PM. |
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
