My wife kicks ass! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jimmydean · 01-01-2007, 11:47 PM

She hates my truck because she is a lifted truck kind of girl (all my trucks before this one have been monsters). But today she showed me this. It should be here in a few weeks. It was $65, now I just have to register it at the DMV. She kicks ass.

<edit> Because it's considered a "classic plate", it should be available. It's the original era style.

Longhorn Man · 01-01-2007, 11:50 PM

my girlfriend bought me a big block. <smiley thumbin nose>
that's actually pretty cool... you can buy a plate from an outside source, and the state will recognise it??? Way cool

masterbeavis · 01-02-2007, 12:07 AM

Good luck with doin that kinda stuff here in CA. If you have orig. plates on a vehicle, and it dropped from the system, you will pay hell to try and keep that plate. Of course for a small fee ($50) CA will issue you a personalized plate, throw it away, and use your orig plate. This is assuming of course they let you get the plate #, I dont know if they will let you get a personalized plate with a normally used numbering sequence.

Where did she pick up that plate anyways?

HuggerCST · 01-02-2007, 12:43 AM

Very cool. Especially from your wife. I was surprised to get this one from my wife for my birthday.

jimmydean · 01-02-2007, 12:06 AM

The state will recognize it if it's not taken. This is the correct plate for pre-75 for Oregon, so it's not like some random plate design. If they won't take it, it will go in the back window, but from the looks of it, they will.

The fact she bought me ANYTHING for this truck is a shock, the fact she has embraced the rat rod direction it has taken is amazing.

jimmydean · 01-02-2007, 12:46 AM

That's bad ass right there. Today is our anniversary, that was my present. No wonder I've kept her around for 8 years now.

AesC10s · 01-02-2007, 01:12 AM

Where did she get them i want a set for my truck.

HuggerCST · 01-02-2007, 01:28 AM

Mine came from someone who sells them on ebay, but I'm not sure who it was.

Longhorn Man · 01-02-2007, 06:25 AM

not sure if they still do it, but Moon Eyes used to do this too.

Brad · 01-02-2007, 10:59 AM

Dave, where'd you get that? I'd like to get one to replace my current ugly one on the Camaro....68 CMRO

longhorn70gmc · 01-02-2007, 11:15 AM

There is a place out here that makes Originals for you to replace the same old worn out plates. I will be taking advantage of that here soon. I will have to relocate them again. I found them at the POMONA car show in LA. I am thinking about staying California on my truck plates. It will all depend on Ohio rules and regs.
Respectfully

72armyswbtruck · 01-02-2007, 11:35 AM

Longhorn,
Your girlfriend kicks ass
license plate vs a BIG BLOCK
don't get me wrong the custom plate is pretty cool but DAMN a BIGBLOCK and she's only your girlfriend
Your one lucky man

bryanw1968 · 01-02-2007, 03:15 PM

That won't fly in Texas. I wanted to use the BDUB-1968 plate in my signature
but couldn't. I ended up going with some 1968 Texas Hemisfair black and white plates.

bryanw1968 · 01-02-2007, 03:16 PM

That is, I went with some used hemisfair plates not ones that I made up off the net.

68C15 · 01-02-2007, 11:35 PM

Quote:

Originally Posted by 72armyswbtruck

don't get me wrong the custom plate is pretty cool but DAMN a BIGBLOCK and she's only your girlfriend
Your one lucky man

I hear wedding bells off in the distance !!!!

Longhorn Man · 01-03-2007, 12:56 AM

Quote:

Originally Posted by 68C15

I hear wedding bells off in the distance !!!!

If I could have it my way...they'd be in the not so distant future.

65-72 chevytoys · 01-02-2007, 03:28 PM

I have been trying to find an original 1972 Florida truck plate that I can register.

Longhorn Man · 01-02-2007, 04:37 PM

billy... ohio won't let you run Cali plates... but you could always use them at cruise ins and stuff.

longhorn70gmc · 01-04-2007, 11:28 PM

Andy,
Thanks for the heads up on the plates and cruz ins.
Billy

jimmydean · 01-02-2007, 07:42 PM

Brad, I will pull up the link when I get home tonight and post it for you all to enjoy. Not sure if they do more than Oregon, I didn't look.

72armyswbtruck · 01-02-2007, 08:05 PM

I'LL be awaiting for the link..........

Midlothian Electric · 01-02-2007, 08:09 PM

Virginia?

msgross · 01-02-2007, 09:01 PM

that's cool, my wife got me one of these for x-mas. I think I will put it on the beer fridge in the garage...

jimmydean · 01-02-2007, 11:17 PM

Link for custom state plates. I'm still not 100% if I can use it, but from what I read, as long as it's not taken and I pay the fees, it's good to go.

72armyswbtruck · 01-03-2007, 12:00 AM

I love that link, just not completely accurate for my plate here in Idaho

01-01-2007, 11:47 PM	#1
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	My wife kicks ass! She hates my truck because she is a lifted truck kind of girl (all my trucks before this one have been monsters). But today she showed me this. It should be here in a few weeks. It was $65, now I just have to register it at the DMV. She kicks ass. <edit> Because it's considered a "classic plate", it should be available. It's the original era style. Attached Images Last edited by jimmydean; 01-01-2007 at 11:49 PM.

01-01-2007, 11:50 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: My wife kicks ass! my girlfriend bought me a big block. <smiley thumbin nose> that's actually pretty cool... you can buy a plate from an outside source, and the state will recognise it??? Way cool

01-02-2007, 12:07 AM	#3
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: My wife kicks ass! Good luck with doin that kinda stuff here in CA. If you have orig. plates on a vehicle, and it dropped from the system, you will pay hell to try and keep that plate. Of course for a small fee ($50) CA will issue you a personalized plate, throw it away, and use your orig plate. This is assuming of course they let you get the plate #, I dont know if they will let you get a personalized plate with a normally used numbering sequence. Where did she pick up that plate anyways? Last edited by masterbeavis; 01-02-2007 at 12:08 AM.

01-02-2007, 12:43 AM	#4
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: My wife kicks ass! Very cool. Especially from your wife. I was surprised to get this one from my wife for my birthday. Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

01-02-2007, 12:06 AM	#5
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: My wife kicks ass! The state will recognize it if it's not taken. This is the correct plate for pre-75 for Oregon, so it's not like some random plate design. If they won't take it, it will go in the back window, but from the looks of it, they will. The fact she bought me ANYTHING for this truck is a shock, the fact she has embraced the rat rod direction it has taken is amazing.

01-02-2007, 12:46 AM	#6
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: My wife kicks ass! That's bad ass right there. Today is our anniversary, that was my present. No wonder I've kept her around for 8 years now.

01-02-2007, 01:12 AM	#7
AesC10s Chevy truck addict Join Date: Apr 2005 Location: Thornton Colorado Posts: 825	Re: My wife kicks ass! Where did she get them i want a set for my truck.

01-02-2007, 01:28 AM	#8
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: My wife kicks ass! Mine came from someone who sells them on ebay, but I'm not sure who it was. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

01-02-2007, 06:25 AM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: My wife kicks ass! not sure if they still do it, but Moon Eyes used to do this too.

01-02-2007, 10:59 AM	#10
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	Re: My wife kicks ass! Dave, where'd you get that? I'd like to get one to replace my current ugly one on the Camaro....68 CMRO __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

01-02-2007, 11:15 AM	#11
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: My wife kicks ass! There is a place out here that makes Originals for you to replace the same old worn out plates. I will be taking advantage of that here soon. I will have to relocate them again. I found them at the POMONA car show in LA. I am thinking about staying California on my truck plates. It will all depend on Ohio rules and regs. Respectfully __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

01-02-2007, 11:35 AM	#12
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: My wife kicks ass! Longhorn, Your girlfriend kicks ass license plate vs a BIG BLOCK don't get me wrong the custom plate is pretty cool but DAMN a BIGBLOCK and she's only your girlfriend Your one lucky man __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

01-02-2007, 03:15 PM	#13
bryanw1968 Senior Member Join Date: Jul 2006 Location: Leander, Texas Posts: 850	Re: My wife kicks ass! That won't fly in Texas. I wanted to use the BDUB-1968 plate in my signature but couldn't. I ended up going with some 1968 Texas Hemisfair black and white plates.

01-02-2007, 03:16 PM	#14
bryanw1968 Senior Member Join Date: Jul 2006 Location: Leander, Texas Posts: 850	Re: My wife kicks ass! That is, I went with some used hemisfair plates not ones that I made up off the net.

01-02-2007, 03:28 PM	#17
65-72 chevytoys Registered User Join Date: Dec 2006 Location: Wesley Chapel, Florida Posts: 1,113	Re: My wife kicks ass! I have been trying to find an original 1972 Florida truck plate that I can register.



Register or Log In To remove these advertisements.

01-02-2007, 04:37 PM	#18
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: My wife kicks ass! billy... ohio won't let you run Cali plates... but you could always use them at cruise ins and stuff.

01-04-2007, 11:28 PM	#19
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: My wife kicks ass! Andy, Thanks for the heads up on the plates and cruz ins. Billy __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

01-02-2007, 07:42 PM	#20
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: My wife kicks ass! Brad, I will pull up the link when I get home tonight and post it for you all to enjoy. Not sure if they do more than Oregon, I didn't look.

01-02-2007, 08:05 PM	#21
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: My wife kicks ass! I'LL be awaiting for the link.......... __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

01-02-2007, 08:09 PM	#22
Midlothian Electric Registered User Join Date: Sep 2006 Location: Midlothian, VA Posts: 50	Re: My wife kicks ass! Virginia? __________________ Quenton Lee Midlothian Electric Comapny Inc. Electrical Contractors Since 1965

01-02-2007, 09:01 PM	#23
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: My wife kicks ass! that's cool, my wife got me one of these for x-mas. I think I will put it on the beer fridge in the garage... Attached Images

01-02-2007, 11:17 PM	#24
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: My wife kicks ass! Link for custom state plates. I'm still not 100% if I can use it, but from what I read, as long as it's not taken and I pay the fees, it's good to go.

01-03-2007, 12:00 AM	#25
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: My wife kicks ass! I love that link, just not completely accurate for my plate here in Idaho __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

Register or Log In To remove these advertisements.