|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
03-26-2016, 12:27 PM
|
#1 |
|
Registered User
Join Date: Jul 2004
Location: Lomita, Ca
Posts: 1,225
|
Engine frame mounts don't fit 64 c10
Ok everyone I have a 64 c10. I have a swapped in a front crossmember from a 77 c10. I have the original frame mounts from the 77c10. The bolt holes on the crossmember line up, but on the frame rail, there is about an inch gap and the holes are offset from eachother. What is the deal here am I missing something?
|
|
|
|
03-26-2016, 02:12 PM
|
#2 |
|
Registered User
Join Date: Jun 2013
Location: joshua tree ca.
Posts: 1,484
|
Re: Engine frame mounts don't fit 64 c10
Some of the guys have used 1" box tube as spacers and others have cut the brackets to fit there are pics floating around of both
|
|
|
|
|
03-26-2016, 07:17 PM
|
#3 |
|
Senior Member
 
Join Date: Aug 2009
Location: Wheeling, Illinois
Posts: 703
|
Re: Engine frame mounts don't fit 64 c10
Holy sh#t!, worry about the bubble gum/calk gun job on the engine mounts, Cut that off first!
|
|
|
|
|
03-26-2016, 09:18 PM
|
#4 |
|
Registered User
Join Date: Apr 2008
Location: Md
Posts: 2,481
|
Re: Engine frame mounts don't fit 64 c10
What engine are you going with. Those mounts look like 1/2 of the clam shell from a newer truck! (Missing the rubber insert, and top ) and Regular SBC mounts from a 64 will work, may need 1/2" to 1" shim on top.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=635605 |
|
|
|
|
03-27-2016, 12:26 AM
|
#5 |
|
60-66 Nut
 Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,251
|
Re: Engine frame mounts don't fit 64 c10
For a better fit, you will need the frame brackets from a '73-'87 C20 or 30. They will fit the frame height much better. Or you could just shorten those to fit. If you do, do that cut all that horrible looking crap off of there and use the correct mounts.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
03-27-2016, 12:53 AM
|
#6 |
|
Registered User
Join Date: Aug 2006
Location: Athens, Georgia
Posts: 1,457
|
Re: Engine frame mounts don't fit 64 c10
There are two things in life where penetration is of the utmost importance: Welding is the other one.
There are also two things in life where making sure things are clean before getting started is of the utmost importance: welding is, again, the other one. -Brad
__________________
'61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School |
|
|
|
|
03-28-2016, 12:14 AM
|
#7 |
|
Registered User
Join Date: Mar 2016
Location: Sacramento, CA
Posts: 9
|
Re: Engine frame mounts don't fit 64 c10
I just went through similar on my 65. After 72 the mounts and perches changed drastically. For a 64 application use pre 67 perches and mounts and make a new hole in the crossmember. In mine the clam shell mounts made the motor sit way too high in the front.
|
|
|
|
|
03-28-2016, 09:27 AM
|
#8 |
|
Registered User
Join Date: Jul 2004
Location: Lomita, Ca
Posts: 1,225
|
Re: Engine frame mounts don't fit 64 c10
yea I know those welds looks terrible. story is, the guy I got the crossmember from had a Pontiac 400 engine in there and he welded those mounts to the perches. First thing I was going to do was get the nasty looking stuff off of there. The pictures I posted are for mock up purposes only. I have the rubber part of the mount already ordered. I will either make a spacer or shorten these down and tig weld if I go that rought
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
