turbo 350 in 66 dipstick - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**65truckowner** · 09-10-2016, 07:04 PM

I put an aftermarket dipstick in my 66 chevy truck with a turbo 350 transmission and had a leak in my floor. I had the hardest time finding the leak and it ended up being the dipstick where is goes into the transmission is leaking. It only goes into the transmission about 1 and a half inch and is loose. Is there a way I can make this work with out leaking. I payed like 30 bucks for it and made a bracket for the truck. It looks great but I cant have the leak. It was suppose to be for the 350

padresag · 09-10-2016, 07:55 PM

believe that it should have an O ring on the tube where it goes in
ron

**The Rocknrod** · 09-10-2016, 09:12 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=604854

http://www.stevesnovasite.com/forums...04&postcount=1

ironman3452 · 09-11-2016, 10:15 AM

o-ring or rubber part that goes around the port, depends on which one you had before you replaced the dip stick, also the place you bought the part should have given you the correct part to seal off the trans

**65truckowner** · 09-11-2016, 08:20 PM

It has the oring but it is loose in the hole

padresag · 09-11-2016, 08:39 PM

is that with a new o'ring or the old one
ron

09-10-2016, 07:04 PM	#1
65truckowner Senior Member Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,305	turbo 350 in 66 dipstick I put an aftermarket dipstick in my 66 chevy truck with a turbo 350 transmission and had a leak in my floor. I had the hardest time finding the leak and it ended up being the dipstick where is goes into the transmission is leaking. It only goes into the transmission about 1 and a half inch and is loose. Is there a way I can make this work with out leaking. I payed like 30 bucks for it and made a bracket for the truck. It looks great but I cant have the leak. It was suppose to be for the 350 __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705

09-10-2016, 07:55 PM	#2
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: turbo 350 in 66 dipstick believe that it should have an O ring on the tube where it goes in ron

09-10-2016, 09:12 PM	#3
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: turbo 350 in 66 dipstick http://67-72chevytrucks.com/vboard/s...d.php?t=604854 http://www.stevesnovasite.com/forums...04&postcount=1 __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

09-11-2016, 10:15 AM	#4
ironman3452 Registered User Join Date: Feb 2015 Location: las cruces Posts: 218	Re: turbo 350 in 66 dipstick o-ring or rubber part that goes around the port, depends on which one you had before you replaced the dip stick, also the place you bought the part should have given you the correct part to seal off the trans

09-11-2016, 08:20 PM	#5
65truckowner Senior Member Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,305	Re: turbo 350 in 66 dipstick It has the oring but it is loose in the hole __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705

09-11-2016, 08:39 PM	#6
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: turbo 350 in 66 dipstick is that with a new o'ring or the old one ron



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.