Windshield washer nozzles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**HO455** · 04-24-2020, 10:14 PM

I did some searching and didn't find what I am looking for. Has anybody found a better washer spray nozzle that matches the factory nozzles?
To be clear I am not interested in any kind of nozzle that appears noticable different from the factory nozzles.

rockyrivermark · 04-24-2020, 10:25 PM

https://www.classicindustries.com/sh...sher-nozzles/I replace mine during 2017 restoration
They were exact match. I can’t remember where I found them
Possibly classic industries.

**HO455** · 04-24-2020, 10:30 PM

Quote:

Originally Posted by rockyrivermark

https://www.classicindustries.com/sh...sher-nozzles/I replace mine during 2017 restoration
They were exact match. I can’t remember where I found them
Possibly classic industries.

Do they have a better spray pattern than the factory ones?
Thank you for your information.

custom10nut · 04-25-2020, 09:04 AM

I see that you want to maintain the Factory Appearance, but have you considered wiper arm mounted nozzles, for better usability?
I got the idea from another board member (Andy 4639), and they work very well.
I chose not to clip the crimped end off the factory nozzle, incase i ever want to take them off.
I got the nozzles off two late model Tahoes in the salvage yard for a couple dollars.
I fabbed some keeper clips to keep the rubber tube under the arm, where it is hardly noticeable.

**HO455** · 04-25-2020, 11:11 AM

Quote:

Originally Posted by custom10nut

I see that you want to maintain the Factory Appearance, but have you considered wiper arm mounted nozzles, for better usability?
I got the idea from another board member (Andy 4639), and they work very well.
I chose not to clip the crimped end off the factory nozzle, incase i ever want to take them off.
I got the nozzles off two late model Tahoes in the salvage yard for a couple dollars.
I fabbed some keeper clips to keep the rubber tube under the arm, where it is hardly noticeable.

I have considered them and i find the look unacceptable.
Thank you for your post.

rockyrivermark · 04-25-2020, 10:44 PM

Quote:

Originally Posted by rockyrivermark

https://www.classicindustries.com/sh...sher-nozzles/I replace mine during 2017 restoration
They were exact match. I can’t remember where I found them
Possibly classic industries.

They works just fine.
Posted via Mobile Device

**HO455** · 04-25-2020, 11:48 PM

Thanks I will see if I can round up some to replace my factory ones. I think that mine have corroded on the inside and hole is so deformed so they don't spray so much as half heartedly shoot a stream out.

04-24-2020, 10:14 PM	#1
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,276	Windshield washer nozzles I did some searching and didn't find what I am looking for. Has anybody found a better washer spray nozzle that matches the factory nozzles? To be clear I am not interested in any kind of nozzle that appears noticable different from the factory nozzles. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

04-24-2020, 10:25 PM	#2
rockyrivermark Registered User Join Date: Apr 2011 Location: Fairview Park, Ohio Posts: 1,031	Re: Windshield washer nozzles https://www.classicindustries.com/sh...sher-nozzles/I replace mine during 2017 restoration They were exact match. I can’t remember where I found them Possibly classic industries. __________________ My build page http://67-72chevytrucks.com/vboard/s...d.php?t=764662 My cabinet building site http://www.cbcabinets.com

04-25-2020, 09:04 AM	#4
custom10nut Registered User Join Date: Apr 2015 Location: East Tn (In the heart of the Smoky Mtns) Posts: 1,882	Re: Windshield washer nozzles I see that you want to maintain the Factory Appearance, but have you considered wiper arm mounted nozzles, for better usability? I got the idea from another board member (Andy 4639), and they work very well. I chose not to clip the crimped end off the factory nozzle, incase i ever want to take them off. I got the nozzles off two late model Tahoes in the salvage yard for a couple dollars. I fabbed some keeper clips to keep the rubber tube under the arm, where it is hardly noticeable.

04-25-2020, 11:48 PM	#7
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,276	Re: Windshield washer nozzles Thanks I will see if I can round up some to replace my factory ones. I think that mine have corroded on the inside and hole is so deformed so they don't spray so much as half heartedly shoot a stream out. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.