72bb mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sinister72 · 02-13-2005, 02:19 PM

I know this has been beat to death,BUtttttt,, I must have missed something. I have a 402 big block, a set of original 72 big block towers.Went to the part store to get a set of motor mounts for the 402. Bingo,not even close,back and was told that was all the puter showed!! Two other stores to make sure,same mount at all three.! Any ideas ,again i may just need a brain reset!

68w/sbc406 · 02-13-2005, 02:20 PM

isnt the 72 ones like the 73 up ones? and the 71s are the wierd ones?

sinister72 · 02-13-2005, 06:09 PM

i think 72 was 1 year ony

meathead95 · 02-13-2005, 08:11 PM

ive got a set of nos 67-71 frame mounts ill trade yah for those 72's?

**fine69** · 02-13-2005, 08:18 PM

The tower for 72 is unique to itself. But the mount that bolts to it is the same as the mount for 73 and up.
Since it was a one year only deal the parts stores are morons about it.
Just tell them you need the mount for 73.

sinister72 · 02-13-2005, 10:06 PM

Thanks Meathead,but i have a 72 i am putting the 402 in...I'll take a look at the 73 mounts and see.Shouldnt be this hard,hahah!

Bob Moore · 02-13-2005, 10:15 PM

Make sure you tell them a 73 454 because the small block mounts bolt in using different locations than the BB mounts. The BB use the top 2 and the lower is in the corner. The small block use the top 2 and the lower is in the center. the 72 BB frame stands only have lower hole for the corner not the center if I recall.

sinister72 · 02-14-2005, 01:16 PM

thanks,,i'll give a 73 mount a try i have to the others back anyway!

Bob Moore · 02-14-2005, 04:14 PM

Sinister - Hope you get this before you go. The BB use the center hole on the bottom and not the corner. My bad.

**PICKMUP** · 02-15-2005, 12:10 AM

Any of the 73 + clamshell MM should work. They are mount inserts that go inside your 72 clamshell. You drill out the rivets and use bolts to put it back together. Energy Suspension has an excellent eurthane replacements...look at their matching trans mount, too.

02-13-2005, 02:19 PM	#1
sinister72 Registered User Join Date: Apr 2002 Location: Bowling Green, kentucky Posts: 182	72bb mounts I know this has been beat to death,BUtttttt,, I must have missed something. I have a 402 big block, a set of original 72 big block towers.Went to the part store to get a set of motor mounts for the 402. Bingo,not even close,back and was told that was all the puter showed!! Two other stores to make sure,same mount at all three.! Any ideas ,again i may just need a brain reset! __________________ 72 chevy C-10 swb fleetside,402 BB.700r4,buckets,console.etc. 72 Blazer CST 350,AT, new project 1971 Chevy Nova ,355 SB blow through turbo in works.

02-13-2005, 02:20 PM	#2
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	isnt the 72 ones like the 73 up ones? and the 71s are the wierd ones? __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

02-13-2005, 06:09 PM	#3
sinister72 Registered User Join Date: Apr 2002 Location: Bowling Green, kentucky Posts: 182	i think 72 was 1 year ony __________________ 72 chevy C-10 swb fleetside,402 BB.700r4,buckets,console.etc. 72 Blazer CST 350,AT, new project 1971 Chevy Nova ,355 SB blow through turbo in works.

02-13-2005, 08:11 PM	#4
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	ive got a set of nos 67-71 frame mounts ill trade yah for those 72's? __________________ 72 2wd blazer 72 swb 4x4

02-13-2005, 08:18 PM	#5
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	The tower for 72 is unique to itself. But the mount that bolts to it is the same as the mount for 73 and up. Since it was a one year only deal the parts stores are morons about it. Just tell them you need the mount for 73. __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

02-13-2005, 10:06 PM	#6
sinister72 Registered User Join Date: Apr 2002 Location: Bowling Green, kentucky Posts: 182	Thanks Meathead,but i have a 72 i am putting the 402 in...I'll take a look at the 73 mounts and see.Shouldnt be this hard,hahah! __________________ 72 chevy C-10 swb fleetside,402 BB.700r4,buckets,console.etc. 72 Blazer CST 350,AT, new project 1971 Chevy Nova ,355 SB blow through turbo in works.

02-13-2005, 10:15 PM	#7
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Motor Mounts Make sure you tell them a 73 454 because the small block mounts bolt in using different locations than the BB mounts. The BB use the top 2 and the lower is in the corner. The small block use the top 2 and the lower is in the center. the 72 BB frame stands only have lower hole for the corner not the center if I recall. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

02-14-2005, 01:16 PM	#8
sinister72 Registered User Join Date: Apr 2002 Location: Bowling Green, kentucky Posts: 182	thanks,,i'll give a 73 mount a try i have to the others back anyway! __________________ 72 chevy C-10 swb fleetside,402 BB.700r4,buckets,console.etc. 72 Blazer CST 350,AT, new project 1971 Chevy Nova ,355 SB blow through turbo in works.

02-14-2005, 04:14 PM	#9
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Corection Sinister - Hope you get this before you go. The BB use the center hole on the bottom and not the corner. My bad. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

02-15-2005, 12:10 AM	#10
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,132	Any of the 73 + clamshell MM should work. They are mount inserts that go inside your 72 clamshell. You drill out the rivets and use bolts to put it back together. Energy Suspension has an excellent eurthane replacements...look at their matching trans mount, too. __________________ Email: frankeham@comcast.net Phone: 360-956-7170



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.