The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-09-2015, 04:29 PM   #1
71CHEVYSHORTBED402
Senior Member
 
71CHEVYSHORTBED402's Avatar
 
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,295
Received my NOS Paint Dividers today - Check these babies out

So POed. Probably didn't need them anyway, because I have a nice set, but I'd have used these, because they were perfect in every way. They did a real nice job packing to ensure no scratches, but only one problem. What a shame, these are hard to find and they jacked em up.



__________________
Tony
71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025
71CHEVYSHORTBED402 is offline   Reply With Quote
Old 11-09-2015, 05:09 PM   #2
BigMike
Registered User
 
BigMike's Avatar
 
Join Date: Sep 2004
Location: Rancho Santa Margarita - SoCal
Posts: 1,432
Re: Received my NOS Paint Dividers today - Check these babies out

Wow! Just Wow! That sucks. I'd be PO'd too. Were they insured?
BigMike is offline   Reply With Quote
Old 11-09-2015, 05:19 PM   #3
71CHEVYSHORTBED402
Senior Member
 
71CHEVYSHORTBED402's Avatar
 
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,295
Re: Received my NOS Paint Dividers today - Check these babies out

Quote:
Originally Posted by BigMike View Post
Wow! Just Wow! That sucks. I'd be PO'd too. Were they insured?
Got them off Ebay/Paypal. I managed to sneak in JUST the right amount and out-bid the guy by 50 cents ($152.50) That was "lucky". I can't tell if insured, was shipped UPS.

Of course the box is bent. I don't even want to pay for shipping.

In fairness to the seller (sorta), these are as difficult to pack safely as anything. You pretty much have to put a box(es) within a box. Soft cardboard won't cut it.
__________________
Tony
71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

Last edited by 71CHEVYSHORTBED402; 11-09-2015 at 05:27 PM.
71CHEVYSHORTBED402 is offline   Reply With Quote
Old 11-09-2015, 05:25 PM   #4
MARKDTN
Registered User
 
Join Date: Jan 2011
Location: Chattanooga, TN
Posts: 2,159
Re: Received my NOS Paint Dividers today - Check these babies out

UPS is insured to at least $100. Sounds like your beef is with them.
__________________
'83 K20-TPI
'73 C10
'79 C10-ex-diesel(SOLD)
'07 Tahoe(Son driving)
'14 Suburban-DD
'71 C10-current project
MARKDTN is offline   Reply With Quote
Old 11-09-2015, 05:29 PM   #5
71CHEVYSHORTBED402
Senior Member
 
71CHEVYSHORTBED402's Avatar
 
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,295
Re: Received my NOS Paint Dividers today - Check these babies out

Quote:
Originally Posted by MARKDTN View Post
UPS is insured to at least $100. Sounds like your beef is with them.
You think? I'll contact, just to see. Thanks
__________________
Tony
71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025
71CHEVYSHORTBED402 is offline   Reply With Quote
Old 11-09-2015, 05:30 PM   #6
cleszkie
Registered User
 
cleszkie's Avatar
 
Join Date: Feb 2003
Location: Santa Ana, CA
Posts: 2,191
Re: Received my NOS Paint Dividers today - Check these babies out

I always ship trim items like these in a PVC pipe with end caps, and ask sellers to do the same for me. Its the only way to do it. Cardboard boxes don't have a chance.
cleszkie is offline   Reply With Quote
Old 11-09-2015, 05:45 PM   #7
71CHEVYSHORTBED402
Senior Member
 
71CHEVYSHORTBED402's Avatar
 
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,295
Re: Received my NOS Paint Dividers today - Check these babies out

Quote:
Originally Posted by cleszkie View Post
I always ship trim items like these in a PVC pipe with end caps, and ask sellers to do the same for me. Its the only way to do it. Cardboard boxes don't have a chance.
Understood, but you'd need at least a 6" pipe. Not they aren't available.
__________________
Tony
71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025
71CHEVYSHORTBED402 is offline   Reply With Quote
Old 11-11-2015, 05:38 PM   #8
71CHEVYSHORTBED402
Senior Member
 
71CHEVYSHORTBED402's Avatar
 
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,295
Re: Received my NOS Paint Dividers today - Check these babies out

Quote:
Originally Posted by MARKDTN View Post
UPS is insured to at least $100. Sounds like your beef is with them.
So far, this turned out to be a great suggestion from a buyer's standpoint. First, unless UPS sends me a bill (likely not), then I got out of shipping costs. Second, it shows good faith.
__________________
Tony
71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

Last edited by 71CHEVYSHORTBED402; 11-11-2015 at 05:55 PM.
71CHEVYSHORTBED402 is offline   Reply With Quote
Old 11-09-2015, 05:30 PM   #9
67ChevyRedneck
Hittin E-Z Street on Mud Tires
 
67ChevyRedneck's Avatar
 
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
Re: Received my NOS Paint Dividers today - Check these babies out

Honestly... don't bother. They'll conclude "insufficient packaging" and you'll have just wasted your time...

Basically, unless it was boxed at a UPS store (even then they would try to find a way not to pay), it will come down to the packaging and they'll claim it wasn't sufficient to protect the package.

Been through this before with UPS. Never got a dime.

Looks like a super comfy chair you got there....
__________________
Jesse James
1967 C10 SWB Stepside: 350/700R4/3.73
1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc
1968 Pontiac Firebird: Project Fire Chicken!
2015 Silverado Double Cab 5.3L Z71
2001 Jeep Wrangler Sport 4.0L 5spd
2020 Chevrolet Equinox Premium 2.0L Turbo
2011 Mustang V6 ~ Wife's ride
American Born, Country by the Grace of God
1967 CST Shop Truck Rebuild!
My 1967 C-10 Build Thread
My Vintage Air A/C Install
Project "On a Dime"
Trying my hand at Home Renovation!
1965 Mustang Modifications!
67ChevyRedneck is offline   Reply With Quote
Old 11-09-2015, 09:24 PM   #10
Elliot949
Registered User
 
Elliot949's Avatar
 
Join Date: Sep 2010
Location: Winfield, Ks.
Posts: 4,162
Re: Received my NOS Paint Dividers today - Check these babies out

Quote:
Originally Posted by 67ChevyRedneck View Post
Honestly... don't bother. They'll conclude "insufficient packaging" and you'll have just wasted your time...

Basically, unless it was boxed at a UPS store (even then they would try to find a way not to pay), it will come down to the packaging and they'll claim it wasn't sufficient to protect the package.

Been through this before with UPS. Never got a dime.

Looks like a super comfy chair you got there....


And that is after jerking you around for 6 months... and the appeal...
__________________
Dan Johnston... Owner of My Dad's- '67 Chevy C-20 Custom Camper Short Fleetside Pickup PAPA J And our newest addition a- '71 Chevy CST/10 Short Fleetside Pickup Haulin' SOLD
Papa J's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=612847

Haulin's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=671130SOLD

B Bears Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=744210
Elliot949 is offline   Reply With Quote
Old 11-10-2015, 12:11 PM   #11
GMCNUT
Senior Member
 
GMCNUT's Avatar
 
Join Date: Jun 2007
Location: Arab Alabama
Posts: 1,809
Re: Received my NOS Paint Dividers today - Check these babies out

Quote:
Originally Posted by 67ChevyRedneck View Post
Honestly... don't bother. They'll conclude "insufficient packaging" and you'll have just wasted your time...

Basically, unless it was boxed at a UPS store (even then they would try to find a way not to pay), it will come down to the packaging and they'll claim it wasn't sufficient to protect the package.

Been through this before with UPS. Never got a dime.

Looks like a super comfy chair you got there....
couldn't have said it better myself - UPS requires 4" of dense foam material around a packaged item before it will pay out on insurance claims. America at large is simply not told and generally doesn't know this when buying insurance. The UPS Store is the only way to fly when you care about what is coming to you because they are in charge of packaging and shipping it. PVC pipe and carpet tubes are good for shipping trim - not much else can hold up to the warehouse and truck loading throwing around the shipping companies do
__________________
My Projects and Toys - All 100% Stock
1972 CST "Highlander" Blazer - 350 auto, PS, PB, A/C, Tilt, Tach, AM/FM & Positraction
1966 Chevy SWB Fleetside BBW Custom Cab, #'s matching 327 V8 & Powerglide, factory deluxe heat, PS, PB, Tinted Glass, sway bar
1961 Chevy SWB Fleetside BBW Custom Cab #'s matching 283 V8 & Powerglide w/ uber-rare Cool-Pack A/C, factory PB, deluxe heat, Clock
1961 GMC K1000 4x4 SWB w/ BBW, Custom Cab and numbers matching 305D V6 engine & 4 spd
1960 GMC SWB Fleetside BBW Custom Cab #'s matching 305A V6 & Hydramatic, factory PB, Clock, Tach, Compass, Hood Jet
1959 Chevy SWB Fleetside BBW Custom Cab w/ rare stainless bed trim, #'s matching 283 V8 & Hydramatic, Deluxe Heat, radio, spotlight
1958 Chevy Cameo #'s matching 283 V8 & Hydramatic, radio, window washers, Factory PB
1958 GMC BBW SWB Fleetside Custom Cab, #'s matching 336 V8 Hydramatic, Factory PS, PB, Clock, RSD, Deluxe Heat & Hood Jet
1957 GMC Suburban Pickup (GMC's Cameo) #'s matching 347 V8 Hydramatic, uber-rare vacuum ashtray, Factory PS, PB, Clock, RSD, Hood Jet
1956 Chevy 3800 1 ton w/ rare 9 ft stepside bed, factory 265 V8 w/ Hydramatic, factory PB, Custom Cab, deluxe heat, spotlight and hood jet.
GMCNUT is offline   Reply With Quote
Old 11-10-2015, 01:48 PM   #12
CUSTOM/10
Senior Member
 
CUSTOM/10's Avatar
 
Join Date: May 2003
Location: Sandown, NH
Posts: 2,833
Re: Received my NOS Paint Dividers today - Check these babies out

I'd be Heartbroken; I've been looking for a pair of those myself. A few yrs back I had a pair of rust free Cali. doors shipped to NH via Greyhound bus, and they were all dented & bent when they got here. I was sick, did a claim through Greyhound and they said "Insufficient Packaging". Whenever I ship something I made it Bomb Proof.

Gary
__________________
Gary
72 SWB 4x4

My 72 SWB Build
http://67-72chevytrucks.com/vboard/s...d.php?t=259859
CUSTOM/10 is offline   Reply With Quote
Old 11-25-2015, 07:31 PM   #13
davepl
Registered User
 
davepl's Avatar
 
Join Date: Aug 2006
Location: Redmond, WA
Posts: 6,332
Re: Received my NOS Paint Dividers today - Check these babies out

Quote:
Originally Posted by 67ChevyRedneck View Post
Honestly... don't bother. They'll conclude "insufficient packaging" and you'll have just wasted your time...

Basically, unless it was boxed at a UPS store (even then they would try to find a way not to pay), it will come down to the packaging and they'll claim it wasn't sufficient to protect the package.

Been through this before with UPS. Never got a dime.

Looks like a super comfy chair you got there....
My stainless bed trim had a subtle shipping bend that I've learned to live with, so I feel his pain.

To be fair, it is possible to package this stuff cheaply and properly (I've ordered a whole car's worth of side trim) in a Schedule 40 PVC pipe, etc. If it's packed insufficiently, then I don't think UPS should be on the hook, do you?

Now if it's brain-dead obviously packaged well enough and got run over by a truck, that's different, but I doubt that happened here.

Based on the packages I've received from eBay sellers over the years, I'd wager most of the times UPS says it was improperly packaged, it probably was.

Had a guy offer to ship me broken stuff and claim it (there's a whole Seinfeld episode on that topic). Didn't even know me, and like we were going to conspire to defraud the shipper!
__________________
1970 GMC Sierra Grande Custom Camper - Built, not Bought
1969 Pontiac 2+2 427/390 4-speed Coupe
1969 Pontiac 2+2 427/390 4-speed Convertible
davepl is offline   Reply With Quote
Old 11-09-2015, 05:41 PM   #14
71CHEVYSHORTBED402
Senior Member
 
71CHEVYSHORTBED402's Avatar
 
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,295
Re: Received my NOS Paint Dividers today - Check these babies out

I just called UPS.......They're going to pick it up and determine liability from there. Thanks.

Ha!, just read ChevyRednecks post. No doubt you're right. The seller doesn't stand a chance. Chair is real confy. Prefer clothe though. Beggers can't be choosy, my parents gave it to me.
__________________
Tony
71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

Last edited by 71CHEVYSHORTBED402; 11-09-2015 at 05:48 PM.
71CHEVYSHORTBED402 is offline   Reply With Quote
Old 11-09-2015, 08:30 PM   #15
Kennuck
Registered User
 
Kennuck's Avatar
 
Join Date: Oct 2013
Location: Dresden, Ontario
Posts: 647
Re: Received my NOS Paint Dividers today - Check these babies out

Too bad about your NOS trim, I hope it works out for you.

I ordered these from MAR K they shipped them taped to a pc of 3/4" thick pine, then wrapped that in a cardboard sleeve and placed inside a heavy cardboard box. I guess they have lots of experience shipping stuff like this.

I also got some NOS lower trim from a member on here and he shipped them in a plastic pipe.
__________________
1970 Short Wide
5.3 4L60E BlackBear tune
3:73 gears, Boyd's Tank
2.5 / 4 drop 5 lug disc brakes
Vintage Air
18x8 Ridlers 255/55 frt. 18x9.5 275/60 rear
Kennuck is offline   Reply With Quote
Old 11-09-2015, 09:16 PM   #16
71CHEVYSHORTBED402
Senior Member
 
71CHEVYSHORTBED402's Avatar
 
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,295
Re: Received my NOS Paint Dividers today - Check these babies out

Quote:
Originally Posted by Kennuck View Post
Too bad about your NOS trim, I hope it works out for you.

I ordered these from MAR K they shipped them taped to a pc of 3/4" thick pine, then wrapped that in a cardboard sleeve and placed inside a heavy cardboard box. I guess they have lots of experience shipping stuff like this.

I also got some NOS lower trim from a member on here and he shipped them in a plastic pipe.
I have as well. I've got a 8' pipe in my "parts room" containing upper bed moldings.

It really is a shame. They were perfect. Still haven't heard from the guy. He can't/won't be happy.

I've got another set of separators. They're beautiful. One wasn't quite straight, possibly from shipping. It's straight now for certain, I wrapped the straight portion with thick cardboard both sides. The RH has a slight bend on the edge/inside/underneath. I think it will still slide in, but want an extra, just in case.
__________________
Tony
71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

Last edited by 71CHEVYSHORTBED402; 11-09-2015 at 09:21 PM.
71CHEVYSHORTBED402 is offline   Reply With Quote
Old 11-09-2015, 11:09 PM   #17
EARNHARDT#3
Registered User
 
EARNHARDT#3's Avatar
 
Join Date: May 2014
Location: PA
Posts: 1,417
Re: Received my NOS Paint Dividers today - Check these babies out

There are people that would straighten those out and you'd never know they were bent.
__________________
1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP
EARNHARDT#3 is offline   Reply With Quote
Old 11-09-2015, 11:22 PM   #18
davischevy
Senior Member

 
davischevy's Avatar
 
Join Date: Sep 2008
Location: Harrison, Arkansas
Posts: 9,836
Re: Received my NOS Paint Dividers today - Check these babies out

Quote:
Originally Posted by EARNHARDT#3 View Post
There are people that would straighten those out and you'd never know they were bent.
What I was thinking. But someone should still pay for the damage.
__________________
other Larry


Build thread, Arkansas K10
https://67-72chevytrucks.com/vboard/...=755797&page=5





The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.
davischevy is offline   Reply With Quote
Old 11-10-2015, 12:52 AM   #19
71CHEVYSHORTBED402
Senior Member
 
71CHEVYSHORTBED402's Avatar
 
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,295
Re: Received my NOS Paint Dividers today - Check these babies out

Quote:
Originally Posted by EARNHARDT#3 View Post
There are people that would straighten those out and you'd never know they were bent.
Probably. I don't know any at this point.
__________________
Tony
71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025
71CHEVYSHORTBED402 is offline   Reply With Quote
Old 11-10-2015, 02:14 AM   #20
F.A.A.benny
Registered User
 
Join Date: Jul 2015
Location: Euless, Tx
Posts: 431
Re: Received my NOS Paint Dividers today - Check these babies out

Sucks. that's why I try to watch what I get from ebay. A lot of sellers don't know how to properly pack and use shipping boxes that are too small for the part(s). In this case. it needed to be a shipping tube or pvc. It really is the responsibility of the seller until it arrives at your doorstep to make sure that the part(s) isn't damaged. Ebay favors buyers so you should come out on top although it sucks to have to go through the hassle and still not get what you wanted. As far shipping providers go. I personally cant stand the post office. It almost seems like having a bad attitude is part of their job requirement. And they have actually lost parts I shipped even with a tracking #. Usp is ok but too expensive. FedEx ftw
F.A.A.benny is offline   Reply With Quote
Old 11-10-2015, 08:38 AM   #21
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,852
Re: Received my NOS Paint Dividers today - Check these babies out

It's clear the responsibility lies on the seller who obviously did not package these precious parts in any manner of concern what so ever. They got their money and that's all that matters. They shouldn't even be allowed to sell N.O.S. I would take this up with PayPal and get my full refund and screw the jerk who packages parts with no concern. What Ebay seller out there would not be aware of UPS's track record of denying responsibility based on insufficient packaging?
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Last edited by special-K; 11-10-2015 at 12:35 PM.
special-K is offline   Reply With Quote
Old 11-25-2015, 07:19 PM   #22
71CHEVYSHORTBED402
Senior Member
 
71CHEVYSHORTBED402's Avatar
 
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,295
Re: Received my NOS Paint Dividers today - Check these babies out

This Ebay seller has turned out to be a treat. I contacted him three times before I heard back. The parts were delivered to him a week ago, and I contacted him again for refund status, and not a word back. He's listed items since, so safe to say I'm on ignore.

Ebay gives him until tomorrow before they process the refund. I figure a bad rating is in order.
__________________
Tony
71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025
71CHEVYSHORTBED402 is offline   Reply With Quote
Old 11-25-2015, 08:52 PM   #23
In The Ten Ring
Registered User
 
Join Date: Jun 2013
Location: West Virginia
Posts: 6,421
Re: Received my NOS Paint Dividers today - Check these babies out

Fight it. UPS damaged (dented badly) a 1971 OEM fender I bought on here and had shipped from CA.

They finally agreed to pay for a body shop to fix it but I had to kick a little out. I ended up not using the fender and will later sell it.

Now I DEMAND any part (easily bent) be shipped in a wooden crate or I won't buy. In some cases I just drive a long ways to pick it up.
In The Ten Ring is offline   Reply With Quote
Old 11-25-2015, 08:34 PM   #24
Clavo106
Registered User
 
Join Date: Apr 2015
Location: Yakima, WA
Posts: 362
Re: Received my NOS Paint Dividers today - Check these babies out

I got my drag link in a pvc pipe. the end of the pipe was completely broken off..
Clavo106 is offline   Reply With Quote
Old 11-27-2015, 08:01 PM   #25
davepl
Registered User
 
davepl's Avatar
 
Join Date: Aug 2006
Location: Redmond, WA
Posts: 6,332
Re: Received my NOS Paint Dividers today - Check these babies out

Quote:
Originally Posted by Clavo106 View Post
I got my drag link in a pvc pipe. the end of the pipe was completely broken off..
I said Schedule 40 because it's pretty thick - made for pressure, not just as a drain pipe, so it's stronger. Which isn't to say that it wasn't already Sched40, or that Sched40 would have lived, but it's tougher than the basic pipe.
__________________
1970 GMC Sierra Grande Custom Camper - Built, not Bought
1969 Pontiac 2+2 427/390 4-speed Coupe
1969 Pontiac 2+2 427/390 4-speed Convertible
davepl is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:25 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com