WTB 72 GMC Control Arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dustykey · 10-29-2008, 08:39 PM

WTB 72 GMC control arms and 2-1/2" drop spindles. Would like to get un-cut 1/2 ton factory springs as well.

billsbowtie · 10-29-2008, 10:31 PM

are you looking for new or used parts . i have most of what you are looking for used.

brossow · 10-29-2008, 11:22 PM

If GMC are the same as Chevy, I've got the arms and springs. Let me know if they're the same and I'll get pics and a price.

Brent

dustykey · 10-31-2008, 06:35 PM

Used parts are fine as long as condition is good. Please send pics if possible.

brossow · 10-31-2008, 07:47 PM

Attached are pics of what I have. Stuff is virtually perfect as far as I can tell. Asking $25 each for the arms and $15 for the springs. Take it all and you can have the springs (and stock spindles if you want 'em) for free. Prices seem cheap compared with quick research but if you think I'm nuts make me an offer and tell me why I'm out of line.

Brent

billsbowtie · 10-31-2008, 10:10 PM

sounds like brossow has you covered.

dustykey · 11-01-2008, 08:27 AM

I really only need the lower control arms and springs. The price is fair for me........Can you get me a shipping price to 29410?

brossow · 11-01-2008, 10:52 AM

I'll try to get a cost later today. I'll have to separate the LCA to weigh it (unless someone knows the weight of one already). Should have a total by tonight. Might have to go in two boxes depending on weight and what I can find for packaging. I know I have a box perfect for the springs.

brossow · 11-03-2008, 01:36 AM

Sorry — still need to get the stuff taken apart so I can get a weight for shipping costs. Didn't forget about it!

dustykey · 11-03-2008, 08:46 PM

If you're willing to go $100 for all of it plus shipping, then I'll take it all so you don't have to take anything apart. If not, then no problem.......either way.

brossow · 11-03-2008, 09:54 PM

I'll have to take it apart to ship anyway -- not sure I could find a box both big enough and sturdy enough to hold the arms still attached to the spindles. If you want the upper and lower arms and the springs, they're all yours for $100 + shipping. The spindles are already promised to someone locally. Let me know and I'll get to it as soon as I can.

dustykey · 11-06-2008, 07:26 PM

I'll take them. $100 for all 4 control arms and 2 front springs plus shipping. Get me a cost for shipping and tell me where to send the $$$$.

brossow · 11-06-2008, 07:50 PM

Sounds good. It's raining here now and supposed to be turning to sleet and snow over the next couple days, but I'll get it apart as soon as I can and get you a total. Wish I had Charleston's climate right about now!

dustykey · 11-06-2008, 08:08 PM

Really.....sounds like it's pretty cold there....you poor guy.....now I feel bad about going for a nice evening ride on the Harley...........I'm over it now....
Thanks

10-29-2008, 08:39 PM	#1
dustykey Combat Inkslinger Join Date: Oct 2008 Location: Charleston, SC Posts: 42	WTB 72 GMC Control Arms WTB 72 GMC control arms and 2-1/2" drop spindles. Would like to get un-cut 1/2 ton factory springs as well. __________________ All you gotta do to make this a nice truck is..............

10-29-2008, 10:31 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB 72 GMC Control Arms are you looking for new or used parts . i have most of what you are looking for used. __________________ i have 67/72 chevy truck parts f/s.

10-29-2008, 11:22 PM	#3
brossow Amateur Rust Fighter Join Date: Sep 2007 Location: Mankato, MN Posts: 1,087	Re: WTB 72 GMC Control Arms If GMC are the same as Chevy, I've got the arms and springs. Let me know if they're the same and I'll get pics and a price. Brent __________________ Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...)

10-31-2008, 06:35 PM	#4
dustykey Combat Inkslinger Join Date: Oct 2008 Location: Charleston, SC Posts: 42	Re: WTB 72 GMC Control Arms Used parts are fine as long as condition is good. Please send pics if possible. __________________ All you gotta do to make this a nice truck is..............

10-31-2008, 07:47 PM	#5
brossow Amateur Rust Fighter Join Date: Sep 2007 Location: Mankato, MN Posts: 1,087	Re: WTB 72 GMC Control Arms Attached are pics of what I have. Stuff is virtually perfect as far as I can tell. Asking $25 each for the arms and $15 for the springs. Take it all and you can have the springs (and stock spindles if you want 'em) for free. Prices seem cheap compared with quick research but if you think I'm nuts make me an offer and tell me why I'm out of line. Brent Attached Images __________________ Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...) Last edited by brossow; 10-31-2008 at 07:48 PM.

10-31-2008, 10:10 PM	#6
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB 72 GMC Control Arms sounds like brossow has you covered. __________________ i have 67/72 chevy truck parts f/s.

11-01-2008, 08:27 AM	#7
dustykey Combat Inkslinger Join Date: Oct 2008 Location: Charleston, SC Posts: 42	Re: WTB 72 GMC Control Arms I really only need the lower control arms and springs. The price is fair for me........Can you get me a shipping price to 29410? __________________ All you gotta do to make this a nice truck is..............

11-01-2008, 10:52 AM	#8
brossow Amateur Rust Fighter Join Date: Sep 2007 Location: Mankato, MN Posts: 1,087	Re: WTB 72 GMC Control Arms I'll try to get a cost later today. I'll have to separate the LCA to weigh it (unless someone knows the weight of one already). Should have a total by tonight. Might have to go in two boxes depending on weight and what I can find for packaging. I know I have a box perfect for the springs. __________________ Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...) Last edited by brossow; 11-01-2008 at 11:02 AM.

11-03-2008, 01:36 AM	#9
brossow Amateur Rust Fighter Join Date: Sep 2007 Location: Mankato, MN Posts: 1,087	Re: WTB 72 GMC Control Arms Sorry — still need to get the stuff taken apart so I can get a weight for shipping costs. Didn't forget about it! __________________ Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...)

11-03-2008, 08:46 PM	#10
dustykey Combat Inkslinger Join Date: Oct 2008 Location: Charleston, SC Posts: 42	Re: WTB 72 GMC Control Arms If you're willing to go $100 for all of it plus shipping, then I'll take it all so you don't have to take anything apart. If not, then no problem.......either way. __________________ All you gotta do to make this a nice truck is..............

11-03-2008, 09:54 PM	#11
brossow Amateur Rust Fighter Join Date: Sep 2007 Location: Mankato, MN Posts: 1,087	Re: WTB 72 GMC Control Arms I'll have to take it apart to ship anyway -- not sure I could find a box both big enough and sturdy enough to hold the arms still attached to the spindles. If you want the upper and lower arms and the springs, they're all yours for $100 + shipping. The spindles are already promised to someone locally. Let me know and I'll get to it as soon as I can. __________________ Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...)

11-06-2008, 07:26 PM	#12
dustykey Combat Inkslinger Join Date: Oct 2008 Location: Charleston, SC Posts: 42	Re: WTB 72 GMC Control Arms I'll take them. $100 for all 4 control arms and 2 front springs plus shipping. Get me a cost for shipping and tell me where to send the $$$$. __________________ All you gotta do to make this a nice truck is..............

11-06-2008, 07:50 PM	#13
brossow Amateur Rust Fighter Join Date: Sep 2007 Location: Mankato, MN Posts: 1,087	Re: WTB 72 GMC Control Arms Sounds good. It's raining here now and supposed to be turning to sleet and snow over the next couple days, but I'll get it apart as soon as I can and get you a total. Wish I had Charleston's climate right about now! __________________ Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...)

11-06-2008, 08:08 PM	#14
dustykey Combat Inkslinger Join Date: Oct 2008 Location: Charleston, SC Posts: 42	Re: WTB 72 GMC Control Arms Really.....sounds like it's pretty cold there....you poor guy.....now I feel bad about going for a nice evening ride on the Harley...........I'm over it now.... Thanks __________________ All you gotta do to make this a nice truck is..............



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.