![]() |
|
![]() |
#1 |
Registered User
Join Date: Nov 2010
Location: Ocala. FL
Posts: 15
|
TH350 Cooler Lines
Hey Everyone,
I'm taking care of a couple things on a 71' C10 I bought and one major issue(well it is to me) is the trans cooler lines are touching the exhaust. These things look like original hard lines that have been pretzeled through many years of use. They do run to an auxiliary cooler in front of the radiator and through the radiator as well. I know there has to be a better solution. I was thinking of running braided steel lines but cost is more important than appearance as this is only a work truck.Let me know what works and doesn't. Thanks! |
![]() |
![]() |
![]() |
#2 |
Cops, ha, catch me if you can!
Join Date: Jun 2009
Location: Santa Barbara, CA.
Posts: 271
|
Re: TH350 Cooler Lines
I got the same thing going on, the cooler lines are right next to my pass. side header. I assume it can be replaced with some rubber line (away from any heat), but really don't know.
__________________
72 C-10 Stepper 350/TH350 3.73 in the back Edelbrock intake and Carb Hooker Comp Headers 275/60R15 on Rallies ![]() ![]() Last edited by gonzo6869; 01-17-2011 at 04:27 PM. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Nov 2010
Location: Ocala. FL
Posts: 15
|
Re: TH350 Cooler Lines
I'm running the stock manifolds, can't imagine it with headers! Boiled tranny fluid anyone?!
|
![]() |
![]() |
![]() |
#4 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: TH350 Cooler Lines
pull the lines away from the exhaust, and secure if needed, and call it done?
|
![]() |
![]() |
![]() |
#5 |
Msgt USAF Ret
![]() ![]() Join Date: Jan 2005
Location: Kalamazoo, Michigan
Posts: 8,714
|
Re: TH350 Cooler Lines
Here is the way some one did it. I saved the pictures to my hard drive.
You can see the lines run under the starter and along the oil pan. They are probably clamped to a pan bolt.
__________________
VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative. |
![]() |
![]() |
![]() |
#6 |
Cruzin
Join Date: Dec 2009
Location: on the road
Posts: 2,835
|
Re: TH350 Cooler Lines
you can buy new hard lines or run the ones you have better. Keep in mind that you can't run just any "rubber" line. There is special rubber line for this and its much higher $ the last time i bought some but i run hard lines anytime i can.
__________________
Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14
Last edited by Hubscrub; 01-17-2011 at 08:35 PM. |
![]() |
![]() |
![]() |
#7 |
Active Member
Join Date: Oct 2006
Location: Ohio
Posts: 1,643
|
Re: TH350 Cooler Lines
http://www.jegs.com/i/JEGS+Performan...60366/10002/-1
http://www.jegs.com/p/JEGS-Performan...61335/10002/-1 The 1st link is to a kit Jegs sells to make all the AN lines you need with Braided SST. The second is the proflo hose that I used to build mine along with the Jegs fittings. This, for me, works a ton better than hard lines - I was able to tuck them up into the frame rail and keep them out if the way, I like the black lines since they always look clean and the are kind of hidden
__________________
1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles ![]() 18.5" x 31" Hoosier Pro Street Radials ![]() ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree ![]() |
![]() |
![]() |
![]() |
#8 | |
sharp as a marble
![]() Join Date: Jan 2007
Location: atlantic beach,florida
Posts: 1,082
|
Re: TH350 Cooler Lines
I have a pretty low opinion of the braided flex lines and rubber trans cooler lines. IF I WERE YOU, I would buy a new set of pre bent lines, and massage
them to clear what you want them to clear. When you get to the radiator I would figure out which one goes into the trans cooler in the radiator ( the top one, I think ) and run the fluid into the radiator, and out of the radiator and then trhut the external cooler and THEN back to the trans. Transmission fluid likes to be a very consistent temp., and this would do that. Quote:
|
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Nov 2010
Location: Ocala. FL
Posts: 15
|
Re: TH350 Cooler Lines
Thanks a ton for all the feedback, pics and links!
|
![]() |
![]() |
![]() |
Bookmarks |
|
|