Mine is Limp! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68 Suburban · 08-22-2002, 10:45 PM

My little vent window handle is limp and wiggles around. What does it take to change one of these? Are they available. I need the drivers side.

**ThreeQuarter** · 08-22-2002, 10:48 PM

There's a roll pin that keeps the handle on the shaft. Punch it out with some gentle taps using a hammer and punch. Replace the little wavy washer that acts as a spring to keep tension on the ass'y. You'll see when you get it apart.

68 Suburban · 08-22-2002, 11:00 PM

Quote:

. Replace the little wavy washer that acts as a spring to keep tension on the ass'y.

Where do I get these parts?

Hooter · 08-23-2002, 04:48 AM

make sure you put the pin in tightly, or be like me put it in loosely and as you cruise along the highway and decide open the vent only to discover that it has fallen on to the road as I cruise at 75mph DOH!

O'l Buck · 08-23-2002, 11:36 AM

Burb, I had one of those that the spring/washer relaxed in and if flopped around long enought the roll pin was starting to get loose in the holes, i replaced it with another used one off another door I had.

Suicide-D · 08-23-2002, 11:43 AM

LMC carries all that stuff. I'm sure all the vendors on the board do also. I think we even have them at O'Reilly.

08-22-2002, 10:45 PM	#1
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	Mine is Limp! My little vent window handle is limp and wiggles around. What does it take to change one of these? Are they available. I need the drivers side. __________________ Just sitting here contemplating contemplation.

08-22-2002, 10:48 PM	#2
ThreeQuarter Senior Member Join Date: Jun 2000 Location: Texan in Iowa Posts: 2,522	There's a roll pin that keeps the handle on the shaft. Punch it out with some gentle taps using a hammer and punch. Replace the little wavy washer that acts as a spring to keep tension on the ass'y. You'll see when you get it apart. __________________ Ben '68 Chevy C10 Custom LWB 327/TH400 2nd owner '16 GMC Sierra 1500 SLE Dblcab 4wd 5.3

08-23-2002, 04:48 AM	#4
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	make sure you put the pin in tightly, or be like me put it in loosely and as you cruise along the highway and decide open the vent only to discover that it has fallen on to the road as I cruise at 75mph DOH! __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

08-23-2002, 11:36 AM	#5
O'l Buck Recovering Truck Driver Join Date: Mar 2002 Location: Orleans, NE USA Posts: 1,883	Burb, I had one of those that the spring/washer relaxed in and if flopped around long enought the roll pin was starting to get loose in the holes, i replaced it with another used one off another door I had. __________________ 67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska

08-23-2002, 11:43 AM	#6
Suicide-D Registered User Join Date: Jan 2001 Location: Katy, TX...but the love of my life resides in Dublin,OH. Posts: 1,408	LMC carries all that stuff. I'm sure all the vendors on the board do also. I think we even have them at O'Reilly.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.