Wtb / trade for exhaust manifold studs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**D.PASSMORE** · 10-06-2008, 11:43 PM

Need these small parts, ac bracket stud - fits on PASS. side, up front and the other, this stud secures the dip stick tube. This style dip stick is usually found on most C or K trucks w/ SM Block V8's with brake booster. I've been looking for a while, so, hope the pictures help, thanks
DP

jaros44sr · 10-07-2008, 09:16 AM

Sorry, I just checked and I thought I had on for you. But, it's for a power steering bracket, only 3/4" above the bolt head

**D.PASSMORE** · 10-08-2008, 07:05 AM

Thanks for looking!

Random Guy · 10-09-2008, 06:57 PM

I never could find any when I looked last year. I ended making a set with a welder buddy of mine. It wasnt pretty but it worked.

**D.PASSMORE** · 10-12-2008, 09:38 PM

Thanks, I think I'll check with a machine shop, Amazing, I wonder how many of these could be found in a junk yard - outside of FLORIDA.

**D.PASSMORE** · 10-13-2008, 10:43 PM

You never know...

**jerry moss** · 10-14-2008, 09:06 AM

Dave,
call Bill out here at vintage chevy truck, i'm sure he has a bunch of them IF he can find them. (510)651-5874

**D.PASSMORE** · 10-14-2008, 09:28 AM

As always, thanks Jerry!

**PICKMUP** · 10-14-2008, 11:21 AM

A stud works good. The ones with the allen hex end are easier to screw in. Just run a nut up to hold the brackets, like the original bolt did. It is nice to be working with the new clean threads, too.

**D.PASSMORE** · 10-14-2008, 06:34 PM

Yeah Frank, I like to keep it original, but I'll keep looking around for a while. Thanks

teeitup · 10-14-2008, 06:52 PM

Ok David, I found my stash while I was cleaning last night, make me a offer on all of them. Thanks Randy

**D.PASSMORE** · 10-14-2008, 09:27 PM

Wow! I'll have to break the pig open. Also, I need the dual vacuum port thing that bolts into the intake manifold behind the carb and the fitting that that screws into the the back of the carb for the brake booster line. I'll PM you with a few more questions. Thanks alot Randy

10-06-2008, 11:43 PM	#1
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Wtb / trade for exhaust manifold studs Need these small parts, ac bracket stud - fits on PASS. side, up front and the other, this stud secures the dip stick tube. This style dip stick is usually found on most C or K trucks w/ SM Block V8's with brake booster. I've been looking for a while, so, hope the pictures help, thanks DP Attached Images __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

10-07-2008, 09:16 AM	#2
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,459	Re: Wtb / trade for exhaust manifold studs Sorry, I just checked and I thought I had on for you. But, it's for a power steering bracket, only 3/4" above the bolt head __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

10-08-2008, 07:05 AM	#3
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: Wtb / trade for exhaust manifold studs Thanks for looking!

10-09-2008, 06:57 PM	#4
Random Guy Registered User Join Date: Feb 2007 Location: Tyler, Texas Posts: 119	Re: Wtb / trade for exhaust manifold studs I never could find any when I looked last year. I ended making a set with a welder buddy of mine. It wasnt pretty but it worked. __________________ CARPE CERVASIUM! 1968 C10 Fleetside LWB Remember Cthulu is watching you! / (@) (@) \

10-12-2008, 09:38 PM	#5
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: Wtb / trade for exhaust manifold studs Thanks, I think I'll check with a machine shop, Amazing, I wonder how many of these could be found in a junk yard - outside of FLORIDA. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

10-13-2008, 10:43 PM	#6
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: Wtb / trade for exhaust manifold studs You never know...

10-14-2008, 09:06 AM	#7
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,855	Re: Wtb / trade for exhaust manifold studs Dave, call Bill out here at vintage chevy truck, i'm sure he has a bunch of them IF he can find them. (510)651-5874 __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

10-14-2008, 09:28 AM	#8
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: Wtb / trade for exhaust manifold studs As always, thanks Jerry!

10-14-2008, 11:21 AM	#9
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Re: Wtb / trade for exhaust manifold studs A stud works good. The ones with the allen hex end are easier to screw in. Just run a nut up to hold the brackets, like the original bolt did. It is nice to be working with the new clean threads, too.

10-14-2008, 06:34 PM	#10
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: Wtb / trade for exhaust manifold studs Yeah Frank, I like to keep it original, but I'll keep looking around for a while. Thanks

10-14-2008, 06:52 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Wtb / trade for exhaust manifold studs Ok David, I found my stash while I was cleaning last night, make me a offer on all of them. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 10-14-2008 at 06:52 PM.

10-14-2008, 09:27 PM	#12
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: Wtb / trade for exhaust manifold studs Wow! I'll have to break the pig open. Also, I need the dual vacuum port thing that bolts into the intake manifold behind the carb and the fitting that that screws into the the back of the carb for the brake booster line. I'll PM you with a few more questions. Thanks alot Randy Last edited by D.PASSMORE; 10-14-2008 at 09:47 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.