Windhield washer bottle questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sven · 07-23-2010, 05:30 PM

I have a 69 4x4 and it's missing it's washer bottle and I can't find the wiring under the hood or where the washer bottle would go. I'm betting it got buried by the PO.

I'll buy a bottle and pump and hose from LMC or something, but does anyone know where the bottle goes and what the wiring is for the pump so it'll work from the washer switch inside the cab?

-Steve

Sinister · 07-23-2010, 05:35 PM

12 volts key on to the red wire for the pump, I ran from the wiper motor for this. Ground wire from the pump to the middle connector at the wiper switch, (blue factory wire goes to this connector). I went to pick a part and got a washer bottle out of a sedan that mounted up to my drivers side inner fender.

cdowns · 07-23-2010, 05:51 PM

the stock pump is up under the dash in the drivers comp attached to the wiper motor. the bottle mounts on the driver side inner fender the pump sucks the fluid from there and squirts it on the windshield

PUMP IS NOT ATTACHED TO THE BOTTLE in a factory setup

Sinister · 07-23-2010, 05:55 PM

Quote:

Originally Posted by cdowns

the stock pump is up under the dash in the drivers comp attached to the wiper motor. the bottle mounts on the driver side inner fender the pump sucks the fluid from there and squirts it on the windshield

PUMP IS NOT ATTACHED TO THE BOTTLE in a factory setup

This is true. My instructions are for an aftermarket washer pump.

**LockDoc** · 07-23-2010, 06:04 PM

-
Here is another thread on the subject...

http://www.67-72chevytrucks.com/vboa...d.php?t=217477

LockDoc

swierker · 07-23-2010, 07:22 PM

The stock pump is a real PITA to get to. Instead of replacing it I used a universal pump and mounted it to firewall. I ran the positive and negative wires from the stock connector I removed from the old pump.

Sven · 07-24-2010, 02:34 AM

Just the ticket, boys, thanks a lot. More than enough information to work this out now. That 88-98 bottle looks just the ticket ...

-Steve

07-23-2010, 05:30 PM	#1
Sven Registered User Join Date: Dec 2009 Location: Laveen, AZ Posts: 69	Windhield washer bottle questions I have a 69 4x4 and it's missing it's washer bottle and I can't find the wiring under the hood or where the washer bottle would go. I'm betting it got buried by the PO. I'll buy a bottle and pump and hose from LMC or something, but does anyone know where the bottle goes and what the wiring is for the pump so it'll work from the washer switch inside the cab? -Steve __________________ 1969 Chevrolet 4x4 C10 Pickup

07-23-2010, 05:35 PM	#2
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Windhield washer bottle questions 12 volts key on to the red wire for the pump, I ran from the wiper motor for this. Ground wire from the pump to the middle connector at the wiper switch, (blue factory wire goes to this connector). I went to pick a part and got a washer bottle out of a sedan that mounted up to my drivers side inner fender. __________________ Beat it to fit, Paint it to match... Last edited by Sinister; 07-23-2010 at 05:36 PM.

07-23-2010, 05:51 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Windhield washer bottle questions the stock pump is up under the dash in the drivers comp attached to the wiper motor. the bottle mounts on the driver side inner fender the pump sucks the fluid from there and squirts it on the windshield PUMP IS NOT ATTACHED TO THE BOTTLE in a factory setup __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

07-23-2010, 06:04 PM	#5
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,546	Re: Windhield washer bottle questions - Here is another thread on the subject... http://www.67-72chevytrucks.com/vboa...d.php?t=217477 LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

07-23-2010, 07:22 PM	#6
swierker Registered User Join Date: May 2010 Location: Wallingford, PA Posts: 186	Re: Windhield washer bottle questions The stock pump is a real PITA to get to. Instead of replacing it I used a universal pump and mounted it to firewall. I ran the positive and negative wires from the stock connector I removed from the old pump.

07-24-2010, 02:34 AM	#7
Sven Registered User Join Date: Dec 2009 Location: Laveen, AZ Posts: 69	Re: Windhield washer bottle questions Just the ticket, boys, thanks a lot. More than enough information to work this out now. That 88-98 bottle looks just the ticket ... -Steve __________________ 1969 Chevrolet 4x4 C10 Pickup



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.