Large Parts for sale in the DFW Area - No Shipping. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smonty · 07-17-2004, 01:06 PM

I have a few parts for sale in the Dallas area. I cannot ship any of these things.

1. 68-72 SWB Fleetside Bed - No Rust and one small ding in driver's side bedside. The bed has had no work done on it and is in original paint. $800.00

2. 67 SWB Stepside Bed - Good condition and has driver's side fender w/no cutout for tire. The driver's side fender has some very fixable dents in it. No bondo on this bed either. The tailgate is good and comes with this bed. - $500.00

3. 72 SWB Leaf Spring Frame w/auto xmember and power steering gear. Rolling frame. - $350.00

4. 71 SWB Coil Spring Frame Rolling. No steering gear or auto crossmember. Tight front end. - $300.00

5. GMC tailgate - has some bow but is rustfree, original paint and looks straight from the back. $100.00. I can ship this in the cont US for $35.00.

6. Nice straight heavy GM Chrome Fleetside Bumper w/brackets and splash guards. $150.00. I can ship this but will have to check on shipping costs.

Will add some more stuff when I do inventory.

Thanks for looking.

Ernie

Inspector722 · 07-17-2004, 01:27 PM

Would you have a good reliable engine for a 67 non-smoker?

TEXAS 68 · 07-17-2004, 04:34 PM

Hey Ernie any posi rearends?

smonty · 07-18-2004, 12:38 AM

Inspector722: I have a good shortblock 250 for your truck that has about 30,000 miles on it. If you were not going for an auto I would have a new clutch, pressure plate and resurfaced flywheel. I do have a line on your 67 parts and will be picking them up if I do not find 68 parts.

TEXAS 68: I think I still have a 307 or 373 Posi unit. I will check and let you know.

Ernie

Inspector722 · 07-18-2004, 01:02 AM

How much would I be looking at for the motor and does it still have the HEI? I am going to be using the auto trans. The truck will survive my wife longer that way.

smonty · 07-18-2004, 01:18 AM

You can have the motor and I will find you an HEI to go with it for $140.00. Or will trade you for the sheet metal I owe you.

Ernie

toddtheodd · 07-18-2004, 09:02 AM

On them posi's, 10 bolt or 12?
Todd

TEXAS 68 · 07-19-2004, 09:26 AM

ttt

07-17-2004, 01:06 PM	#1
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Large Parts for sale in the DFW Area - No Shipping. I have a few parts for sale in the Dallas area. I cannot ship any of these things. 1. 68-72 SWB Fleetside Bed - No Rust and one small ding in driver's side bedside. The bed has had no work done on it and is in original paint. $800.00 2. 67 SWB Stepside Bed - Good condition and has driver's side fender w/no cutout for tire. The driver's side fender has some very fixable dents in it. No bondo on this bed either. The tailgate is good and comes with this bed. - $500.00 3. 72 SWB Leaf Spring Frame w/auto xmember and power steering gear. Rolling frame. - $350.00 4. 71 SWB Coil Spring Frame Rolling. No steering gear or auto crossmember. Tight front end. - $300.00 5. GMC tailgate - has some bow but is rustfree, original paint and looks straight from the back. $100.00. I can ship this in the cont US for $35.00. 6. Nice straight heavy GM Chrome Fleetside Bumper w/brackets and splash guards. $150.00. I can ship this but will have to check on shipping costs. Will add some more stuff when I do inventory. Thanks for looking. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project Last edited by smonty; 07-18-2004 at 12:42 AM.

07-17-2004, 04:34 PM	#3
TEXAS 68 Vortec in the works Join Date: Nov 2003 Location: Spring,Texas Posts: 735	Hey Ernie any posi rearends? __________________ 68? It's all figured out untill you get it apart. Is it Sunday yet??? 68 Project 68 SWB frame off/98 Vortec with stock FI/power everything. 95 ECLB 2500 with 346,000 on the clock(the original HD) 99 Lesabre-wifes ride 08 Crew Cab LTZ-All Mine 89 SWB 5/7 drop-Son's first ride.

07-18-2004, 12:38 AM	#4
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply to Inspector722 and TEXAS 68 Inspector722: I have a good shortblock 250 for your truck that has about 30,000 miles on it. If you were not going for an auto I would have a new clutch, pressure plate and resurfaced flywheel. I do have a line on your 67 parts and will be picking them up if I do not find 68 parts. TEXAS 68: I think I still have a 307 or 373 Posi unit. I will check and let you know. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

07-18-2004, 01:18 AM	#6
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply to Inspector722 You can have the motor and I will find you an HEI to go with it for $140.00. Or will trade you for the sheet metal I owe you. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

07-19-2004, 09:26 AM	#8
TEXAS 68 Vortec in the works Join Date: Nov 2003 Location: Spring,Texas Posts: 735	ttt __________________ 68? It's all figured out untill you get it apart. Is it Sunday yet??? 68 Project 68 SWB frame off/98 Vortec with stock FI/power everything. 95 ECLB 2500 with 346,000 on the clock(the original HD) 99 Lesabre-wifes ride 08 Crew Cab LTZ-All Mine 89 SWB 5/7 drop-Son's first ride.

07-17-2004, 01:27 PM	#2
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Would you have a good reliable engine for a 67 non-smoker?

07-18-2004, 01:02 AM	#5
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	How much would I be looking at for the motor and does it still have the HEI? I am going to be using the auto trans. The truck will survive my wife longer that way.

07-18-2004, 09:02 AM	#7
toddtheodd The oddest Todd around Join Date: May 2004 Location: Miami, Florida Posts: 1,418	On them posi's, 10 bolt or 12? Todd



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.