![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jun 2004
Location: Saskatchewan, Canada
Posts: 1,368
|
I'll start the what got done on the weekend.
Well I might as well start off with what I got done. I relocated my battery to the back, put the cut off switch in the bumper, and mounted the remote terminals under the hood. I also replaced my plastic fuel cell with a aluminum one, redid the fuel line with a billet suction filter and shut off valve. I would have posted a pic of the hole I cut in my dint free box for the sump, but I didn't want to make the "keep her original" guy's upset.
![]() Last edited by 71Dragtruck; 08-14-2005 at 09:05 PM. |
![]() |
![]() |
![]() |
#2 |
user # 2756
![]() Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
My oldest(10) helped me tighten down all the bolts in my 8' stepside bed floor, and install the steps I had. Got the form up for my driveway, got 9 yds coming tomorrow.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm ![]() Last edited by JIMs70GMC; 08-14-2005 at 09:15 PM. |
![]() |
![]() |
![]() |
#3 | |
Registered User
Join Date: Jun 2004
Location: Saskatchewan, Canada
Posts: 1,368
|
Quote:
Same here oldest daughter 12, backed up the bolts on my cell for me ![]() |
|
![]() |
![]() |
![]() |
#4 |
Account Suspended
Join Date: Mar 2001
Location: Virginia Beach, Va. U.S.A.
Posts: 15,320
|
I helped Wootdogs brother Josh do some bodywork on his truck bed, and my daughter's prom date shot a couple coats of paint on the cab. Josh shot a couple coats too, we'll have some pics to post soon.
|
![]() |
![]() |
![]() |
#5 |
woodman13
![]() Join Date: Jul 2004
Location: Moody, Tx
Posts: 261
|
I installed header gaskets on a 1996 Formula LT-1(hooker super comp headers) pain in the A$$, replaced a dip stick tub on a 1995 Camaro, installed headers, plugs, built a bracket for my alternator on my 1969/1971 Chevy truck, installed a Hurst shifter(had to replace a section of aluminum floor some dumba$$ installed to mount the shifter on, and tryed to get it running. Straightened the shop(happens every weekend) and drank all the beer in my shop!
__________________
Woodman13 2007 Dodge Ram 3500 5.9 rolling coal! 1994 Caprice 9C1 88K miles, LT-1, dropped/shaved 1967 C-30 350 4 sp dually 1971 C10 SWB BBC, auto; good driver |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Feb 2004
Location: Fenelon Falls, ON Canada
Posts: 1,455
|
I started the truck and moved it 10 feet over in the driveway. There done.
|
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Jan 2001
Location: Jackson, New Jersey
Posts: 1,560
|
got the 71 regestered and insured friday and on saturdaydrove it more than 50 feet for the first time.
3 miles to be exact ![]() thats all i had time for had to go to work, besides i didnt wanna were out that (my new truck) feiling. ![]() man what a smooth ride. im off for the next 3 days you can bet ill be going for i little cruise this week. gotta show here off ![]()
__________________
2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER) |
![]() |
![]() |
![]() |
#8 |
YA YA
Join Date: Aug 2004
Location: Rockledge, Fl
Posts: 1,273
|
Man that's a sharp application ya got there Drag!
I actually got to work on my project for the first time in several months. Learning as I go I'm doing a cab swap. Got everything outta the cab except front/rear glass, fuel tank, steering column, and brake assembly. Not sure how to go about removing the glass so I'll probably have to do a Q&A post on that...lol
__________________
Jimbo '72 SWB - 350 (frame-off resto in progress - donations accepted) '04 Chevy Avalanche '03 Cadillac CTS (wife's ride) Restoration progress - http://67-72chevytrucks.com/vboard/s...d.php?t=335707 |
![]() |
![]() |
![]() |
#9 |
'71 chevy s.bed/s.side
![]() Join Date: Mar 2005
Location: Chesapeake, VA
Posts: 1,571
|
Welded in the patch panels on my hood brace panel. Turned out pretty good.
Jims70GMC- Watch the heat tomorrow! You better move fast with that concrete, in this heat it'll set up fast.
__________________
STILL PLAYS WITH CARS...AND TRUCKS!! Parents! Be good to your kids...they get to choose your nursing home! 250 I-6 with a 3 speed Saginaw and Borg Warner Overdrive...She's got overdrive! |
![]() |
![]() |
![]() |
#10 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
ummm, I tightened up the alt belt on my worthless bro in law's chevy tracker.
![]() oops, i ment my bro in law's worthless chevy tracker. no I didn't...I had it right the first time. |
![]() |
![]() |
![]() |
#11 |
Keep On Truckin'
Join Date: Mar 2003
Location: Buda, Texas
Posts: 1,354
|
Sweated my a$$ off in 100 deg Texas heat
Fabricated and installed three point seat belt brackets, modified and installed Mazda fuel door opening mechanism, installed Firebird side marker lights, wired up A/C compressor, installed hood lock, plumbed gas tank vent, measured requirements for TPI tubing and several other punch list items.....
__________________
Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire..... |
![]() |
![]() |
![]() |
#12 | |
Registered User
Join Date: Apr 2004
Location: Calgary, Alberta,Canada
Posts: 1,595
|
Quote:
__________________
I know what your thinking.......I have ESPN. ![]() Sometimes it's easier to do things the hard way. ![]() Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!! ![]() ![]() |
|
![]() |
![]() |
![]() |
#13 | |
Keep On Truckin'
Join Date: Mar 2003
Location: Buda, Texas
Posts: 1,354
|
Quote:
__________________
Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire..... Last edited by mocwon; 08-14-2005 at 10:54 PM. |
|
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Jun 2004
Location: Saskatchewan, Canada
Posts: 1,368
|
Oh since I haven't used my washer fluid in 17 years, I also removed the bottle and bracket, just to balance the weight I lost from the battery LOL.
|
![]() |
![]() |
![]() |
#15 |
4 eyed fever
Join Date: Jul 2005
Location: Eureka, Nevada
Posts: 500
|
installed my lift kit and shocks. PITA to do without a gas axe for those 35 YO u bolts!! but it sure looks nice! also installed new header gaskets(again). this time i took advice from you guys and used regular manifold gaskets and hi temp sealer. it sounds good now, i just hope it lasts for more than 3k miles.
__________________
1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!! |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Oct 2003
Location: San Jose Ca.
Posts: 3,334
|
I picked up a 327 for my 68.
![]()
__________________
RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234 |
![]() |
![]() |
![]() |
#17 |
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,122
|
I went to the NHRA drag races in Brainerd saturday. I took my wife and son (9 and a total gearhead). We watched Tony Schumacher break more track records and almost the NHRA record for mph at over 337. He ran twice with ets of 4.44 and 4.48. Oh yeah, they all ran well and it was my first time back since 1995, before the boy was born. There may be some correlation between the mother breathing in all those nitro-methane fumes and tire smoke and him being afflicted with gearheadedness. I can think of worse things, but he has a long, sometimes painful, therapy to deal with. I'm trying my best to be understanding and supportive of his interests, but dammit, he wants to take my truck in a few years, then I'll have to find new therapy. My oldest girl is named Shelby, for the AC Cobras. Maybe I'll buy a kit...
HG ![]()
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 ![]() 72 ![]() HG's Plow Truck '78 ![]() Bigass Farm Truck HG's thread of miscellaneous stuff |
![]() |
![]() |
![]() |
#18 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,863
|
I opened the door to the shop and saw my truck as I pulled out the mower. I was on the road most of the weekend driving to and from my daughter's school. Mowed the pasture land, least it seemed that way in the heat/humidity.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
#19 |
blood type; Retumbo
Join Date: Jan 2004
Location: next to my reloading bench
Posts: 10,269
|
I recieved shipment of a 67 short step project from another member. it came with a butt-load of extra parts which needed a home. then I cleaned ou the garage & reinforced the roof joists. (gotta make room for parts up above) then I got a call from Dean & Crystal saying they are about 2 hours away. we ended up with a total of 5 board members here for a mini meet. I had a great time BSing with all of them. thankfully I had a pair of Honda buckets & a Chevy bench seat. sorry, no pics, the batteries in digicam were dead.
__________________
Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Aug 2005
Location: Tennyson, Indiana 47637
Posts: 137
|
I fixed my power steering pressure hose leak :crosses fingers: And worked on degreasing the engine from months of PS fluid leakage. PO thought the way to fix the leak was just to fill more PS fluid in the resevoir.
![]() Oh yea... did a lil of this ![]()
__________________
72 Chevy Short Bed Fleet: 350/TH350 - Sold - Now trying to sell the parts that I have left over. _______________________ 2006 VW GTI Last edited by 72str8flush; 08-15-2005 at 11:29 AM. |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Feb 2005
Location: Bay Area, California
Posts: 995
|
I replaced my heater core, man what a PITA.
__________________
1971 Chevy C10 Shortbed Stepside, 307v8 3-on-the-tree |
![]() |
![]() |
![]() |
#22 |
Senior Member
Join Date: Jul 2003
Location: Mount Forest, Ontario, Canada
Posts: 978
|
Finished up replacing the inner rocker, kick, front pillar and outer rocker on the passenger side of the Burb. Now it's time to move onto the driver side.
Ron
__________________
72 Chevy C10 (rust repaired, starting body work) 72 GMC 3/4ton 4x4 72 Chevy C20 Suburban 38 Ford Tudor Humpback Sedan (from the darkside ![]() 67 Pontiac Parisienne 55 Studebaker Commander 2dr Hardtop (Starliner) My Youtube channel with Video Updates! |
![]() |
![]() |
![]() |
#23 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
no car related stuff/ fri and sat nights i was up min the attics ran a new bigger improved 8" ac duct so it dumps right in the middle of the shop for better more even cooling/also in the house attic ran the duct for the kitchen vent hood, also had to reposition the v220v line for the stove and ran new circuits for the dishwasher,venthood,and accessory outlets
during the days i rented a heavyduty planer/ been slo drying and curing these new england tight grained oak planks for almost 3years 16-18" wide by 31/2thick by 8-10' long so i was busy planing ripping and cutting to dimension for cabinet and shelf projects// got them inside storeage for the final drying session 3-4months b-4 final sanding to dimension// got huge bags of oak sawdust and shavings to dispose of now// hopefully i'll be able to finally finish up the kitchen b-4 speedweeks next year
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#24 | |
Registered User
Join Date: Aug 2005
Location: Tennyson, Indiana 47637
Posts: 137
|
Quote:
__________________
72 Chevy Short Bed Fleet: 350/TH350 - Sold - Now trying to sell the parts that I have left over. _______________________ 2006 VW GTI |
|
![]() |
![]() |
![]() |
#25 | |
Registered User
Join Date: May 2005
Location: Texarkana, AR 71854
Posts: 397
|
Quote:
__________________
2006 Titan SE Crew Cab Daily Driver 2005 Mazda Tribute (Wifes car) 1969 C10 SWB 350/3 Fleet "Max" 1969 Chevelle 2 door 350/3 |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|