67 cst - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GASWAGON · 11-15-2009, 07:31 PM

Hey Guys, I wanted to share the build of my truck with the members of the board. I have learned alot from this board so hopefully someone might benefit from my experiences. Never done this before so hope it doesn't suck!

Jay

So I guess I will start from the begining. I was looking for a clean cst and found this one on evilbay in NewMexico.I bought the truck in april of this year and flew down and drove it home 2500 miles to Mass. Wasn't sure if she would make it but the PO said it ran good so I figured I would find out.
Here's what I started with.

GASWAGON · 11-15-2009, 07:45 PM

So from April to a month ago it sat in my garage while I finished and sold my other 67 3/4 ton. Needed the money from that to start this build and couldn't afford the extra insurance for 2 trucks etc. on the road. 1 week ago today I started the tear down. Gotta love rust free stuff it went real easy, no issues.
had it stripped to the bare frame by tuesday working in my free time.

GASWAGON · 11-15-2009, 07:50 PM

A few more pic's

GASWAGON · 11-15-2009, 07:56 PM

Sent the frame and suspension pieces out to be media blasted. I ordered the suspension parts and disk kit from CPP. 4.5F 5R drop. Should have my frame back this week and will be sending it and the other suspension pieces over to the powder coater. This will be my daily driver so I want it to look great but also stand the test of time and weather. I wont use it in the winter but rain or shine spring, summer,Fall. It will serve as a parts chaser also. I will update this when I have some more to share.

72BlckButy · 11-15-2009, 09:27 PM

Nice looking build, best of luck with the project!

GASWAGON · 11-16-2009, 08:32 AM

Thanks!

ripdog28 · 11-16-2009, 08:36 PM

That truck would make an excellent start. It dont look like you will be doing much rust repair...

GASWAGON · 11-16-2009, 11:20 PM

Thankfully not much. Right front fender had a dent repaired down low at one time and has started to rust but other than that just some light surface rust.
It gives me the chance to spend the loot on the chassis and drive train.

GASWAGON · 11-29-2009, 06:49 PM

Christmas came early! 13 boxs of parts!

72BlckButy · 11-29-2009, 08:18 PM

GASWAGON... glad to see Christmas came early.

Side note... You might consider checking the boxes to ensure you received "everything" you ordered; including bolts, nuts, and washers.

GASWAGON · 11-29-2009, 08:37 PM

Quote:

Originally Posted by 72BlckButy

GASWAGON... glad to see Christmas came early.

Side note... You might consider checking the boxes to ensure you received "everything" you ordered; including bolts, nuts, and washers.

No doubt! I checked it all out the day it arrived. Everything was accounted for. You never know! I'm happy all the parts came at one time, so I can start assembly as soon as I get the frame back. I like to see progress or I get side tracked with other stuff and have to work my self back into the project.

kyull67 · 12-01-2009, 08:14 PM

Looks like a great start!

kyull67 · 12-01-2009, 08:14 PM

what's up with that wire through the jamb?

GASWAGON · 12-01-2009, 10:02 PM

Quote:

Originally Posted by kyull67

what's up with that wire through the jamb?

Thanks! The wire is for the speakers in the doors. It was done prior to my ownership, but was done very nicely so I decided to keep them.

chevy88 · 12-06-2009, 10:03 AM

Now that's just are sharp looking motor.

GASWAGON · 12-06-2009, 08:52 PM

Quote:

Originally Posted by chevy88

Now that's just are sharp looking motor.

Thanks, I try

PHAT TONY · 12-06-2009, 09:25 PM

Post #35; nobody has mentioned the vintage cross-ram intake pictured!!! You using this!?!?

GASWAGON · 12-06-2009, 09:39 PM

Quote:

Originally Posted by PHAT TONY

Post #35; nobody has mentioned the vintage cross-ram intake pictured!!! You using this!?!?

Not sure yet. It is a really cool old Mickey Thompson cross-ram. I have had it for a while now but, haven't come up with the carbs etc. I was surprised no one else noticed it either!

Hottrucks · 12-06-2009, 10:18 PM

ok remind me not to park my junk anywhere near you it will only make it look worse??

I do plan on it keep in touch and maybe we can meet up for a beer...I'm looking ofr anything Kool for the truck but really want a set of 12 or 14 inch wheels for the new sneakers

GASWAGON · 12-06-2009, 10:49 PM

Quote:

Originally Posted by Hottrucks

ok remind me not to park my junk anywhere near you it will only make it look worse??

I do plan on it keep in touch and maybe we can meet up for a beer...I'm looking ofr anything Kool for the truck but really want a set of 12 or 14 inch wheels for the new sneakers

Your truck looks cool! Far from junk.! I like it long and low! Check this 55 out! This is Junk! Border line if it worth saving, but we will build it for the customer,or I should say what is left of it after media blasting

I will be there as long as work doesn't interfere. I got the first round! Whacha get for new skins?

Hottrucks · 12-07-2009, 06:58 AM

looking for a set of 29x18x15...there easy on the lawn in the spring

mahanian · 09-09-2010, 03:51 PM

Great build thread! Any updates?

GASWAGON · 09-09-2010, 04:04 PM

Quote:

Originally Posted by mahanian

Great build thread! Any updates?

Thanks! I have been working on it, but time has been tough to come by in the last few months. I sold the small block and I am in the process of building a 427 BBC. Always wanted a big block pick up. finished the cab and got it mounted to the frame.

GASWAGON · 09-09-2010, 04:07 PM

I will add a few more pic's later today. Can anyone help me add my build thread to my signature? Thanks!

GASWAGON · 09-09-2010, 04:27 PM

I've been helping my friend build his 68 swb lately. it's coming along pretty quickly!

11-15-2009, 07:31 PM	#1
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	67 cst Hey Guys, I wanted to share the build of my truck with the members of the board. I have learned alot from this board so hopefully someone might benefit from my experiences. Never done this before so hope it doesn't suck! Jay So I guess I will start from the begining. I was looking for a clean cst and found this one on evilbay in NewMexico.I bought the truck in april of this year and flew down and drove it home 2500 miles to Mass. Wasn't sure if she would make it but the PO said it ran good so I figured I would find out. Here's what I started with. Last edited by GASWAGON; 05-08-2011 at 04:23 PM.

11-15-2009, 07:45 PM	#2
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: 67 cst So from April to a month ago it sat in my garage while I finished and sold my other 67 3/4 ton. Needed the money from that to start this build and couldn't afford the extra insurance for 2 trucks etc. on the road. 1 week ago today I started the tear down. Gotta love rust free stuff it went real easy, no issues. had it stripped to the bare frame by tuesday working in my free time. Last edited by GASWAGON; 05-08-2011 at 04:23 PM.

11-15-2009, 07:56 PM	#4
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: 67 cst Sent the frame and suspension pieces out to be media blasted. I ordered the suspension parts and disk kit from CPP. 4.5F 5R drop. Should have my frame back this week and will be sending it and the other suspension pieces over to the powder coater. This will be my daily driver so I want it to look great but also stand the test of time and weather. I wont use it in the winter but rain or shine spring, summer,Fall. It will serve as a parts chaser also. I will update this when I have some more to share.

11-15-2009, 09:27 PM	#5
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 67 cst Nice looking build, best of luck with the project! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

11-16-2009, 08:32 AM	#6
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: 67 cst Thanks!

11-15-2009, 07:50 PM	#3
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: 67 cst A few more pic's Last edited by GASWAGON; 05-08-2011 at 04:23 PM.

11-16-2009, 08:36 PM	#7
ripdog28 Registered User Join Date: Apr 2008 Location: Imperial Beach, CA Posts: 1,040	Re: 67 cst That truck would make an excellent start. It dont look like you will be doing much rust repair... __________________ 69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles.3.5/6in drop. My Build.

11-16-2009, 11:20 PM	#8
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: 67 cst Thankfully not much. Right front fender had a dent repaired down low at one time and has started to rust but other than that just some light surface rust. It gives me the chance to spend the loot on the chassis and drive train.

11-29-2009, 06:49 PM	#9
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: 67 cst Christmas came early! 13 boxs of parts! Last edited by GASWAGON; 05-08-2011 at 04:23 PM.

11-29-2009, 08:18 PM	#10
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 67 cst GASWAGON... glad to see Christmas came early. Side note... You might consider checking the boxes to ensure you received "everything" you ordered; including bolts, nuts, and washers. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 11-29-2009 at 08:18 PM.

12-01-2009, 08:14 PM	#12
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: 67 cst Looks like a great start! __________________ The first '67 The current '67 '63 Biscayne

12-01-2009, 08:14 PM	#13
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: 67 cst what's up with that wire through the jamb? __________________ The first '67 The current '67 '63 Biscayne

12-06-2009, 10:03 AM	#15
chevy88 Registered User Join Date: May 2007 Location: Southern, Saskatchewan Posts: 640	Re: 67 cst Now that's just are sharp looking motor. __________________ Kerry My build thread. http://67-72chevytrucks.com/vboard/s....php?p=3657823 1971 Chev SWB with 68 nose, 6.2 diesel th350, and 3.73 rear gears 1988 Chev Extendacab 2010 Honda VT1300CS Sabre 2005 Buick Rendezvous wife's ride

12-06-2009, 09:25 PM	#17
PHAT TONY Registered User Join Date: Aug 2008 Location: Red Deer ab canada Posts: 1,250	Re: 67 cst Post #35; nobody has mentioned the vintage cross-ram intake pictured!!! You using this!?!? __________________ 1972 factory 2 Wheel Drive Blazer-Sold 1972 K10 4X4-Sold 1971 Chevrolet Cheyenne/10-Sold 1970 Chevrolet C/10-Sold 1968 GMC 4X4-Project 1968 Chevrolet C/10 Pro Street 1970 GMC 3/4 Ton-Parts 1997 2WD 2DR Yukon-Sweet http://67-72chevytrucks.com/vboard/s...d.php?t=335664

12-06-2009, 10:18 PM	#19
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: 67 cst ok remind me not to park my junk anywhere near you it will only make it look worse?? I do plan on it keep in touch and maybe we can meet up for a beer...I'm looking ofr anything Kool for the truck but really want a set of 12 or 14 inch wheels for the new sneakers __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html



Register or Log In To remove these advertisements.

12-07-2009, 06:58 AM	#21
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: 67 cst looking for a set of 29x18x15...there easy on the lawn in the spring __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

09-09-2010, 03:51 PM	#22
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 67 cst Great build thread! Any updates?

09-09-2010, 04:07 PM	#24
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: 67 cst I will add a few more pic's later today. Can anyone help me add my build thread to my signature? Thanks! Last edited by GASWAGON; 05-08-2011 at 04:24 PM.

09-09-2010, 04:27 PM	#25
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: 67 cst I've been helping my friend build his 68 swb lately. it's coming along pretty quickly! Last edited by GASWAGON; 05-08-2011 at 04:24 PM.

Register or Log In To remove these advertisements.