![]() |
|
![]() |
#1 |
Registered User
Join Date: Jan 2010
Location: Forsyth, Ga
Posts: 1,012
|
Brake Line setup
I have purchased big brake kit front and rear for my 65 Suburban which have multi piston calipers. I have a new disc/disc master cylinder and prop valve.
So my question is about line sizes, I plan on making my own lines. Should I run dual 1/4 inch lines from the M/C to the prop valve. Then 3/16 to each side on the front to 3an Flexible lines and for the rear run 1/4 to a 4an line to the T on the rear axle and split off 3/16 there to each side on the axle? Thoughts/suggestions? |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2007
Location: Tiffin Oh
Posts: 299
|
Re: Brake Line setup
3/16 everywhere the whole thing to # 3 flex lines. Do you mean adjustable prop valve? Do you have the right size master? What calipers are we talking about? Power or manual?
|
![]() |
![]() |
![]() |
Bookmarks |
|
|